max offset for 93 pajero?

[xj]

Not that i actually own one.... BUT.... can a 92 Paj with 40mm body lift take an 8x15 rim with a -95 offset?

[xj]

actually backspace all of that. just done some math. a 95mm offset on an 8 inch rim would leave 7.62mm of rim left on the back.... surely thats not possible

So what offset can a Paj take?

[NJV6]

Sorry I can't help you with the numbers but a Landcruiser or solid axle hilux one sticks out on a Pajero and may just scrap in without needing to add to the factory flares. They also tend to get a bit close to the guards at the rear of the front wheels when it is compressing and turning with a full size 33.

Std nissan offset works fine but I don't know what they measure.

[skid]

actually backspace all of that. just done some math. a 95mm offset on an 8 inch rim would leave 7.62mm of rim left on the back.... surely thats not possible

So what offset can a Paj take?

from wot you are saying it sounds you have a rim with about 18-20 positive offset. it could fit but will sit under the guards a wee bit

as always try it on first