petefj40's build/mods

Starting a project or modification? Then post it's progress here and show us some pic's.
Post Reply
User avatar
mike
Last minute Mike
Posts: 3545
Joined: Fri Dec 06, 2002 12:00 pm
Location: Christchurch - The place I'd like to be

Re: petefj40's new mods. Almst finished!

Post by mike »

OMG that sounds bloody amazing. Its like a race car cycling up through the gears :shock:
Might have to get the engine swap done in the landy I think!
What are you doing with your old headers pete? I wonder if they can be adapted to fit a rover 8 :wink:

Mike
1973 SWB Land Rover V8 Hybrid
1994 Toyota Surf
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

mike wrote:OMG that sounds bloody amazing. Its like a race car cycling up through the gears :shock:
Might have to get the engine swap done in the landy I think!
What are you doing with your old headers pete? I wonder if they can be adapted to fit a rover 8 :wink:

Mike


Engine swap? :shock: What's wrong with the rover V8 Mike? I thought, for what it is, it got you through some pretty hard stuff in the mud plug last year!

Hey, if you want the headers, there yours. they're no use to me now.
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: petefj40's new mods. Almst finished!

Post by skid »

petefj40 wrote:Here's another clip. A little bit noise this time. :D

http://uk.youtube.com/watch?v=wdVtQ_LQP3Y



dammit, dammit, dammit

damn you pete

makes me wish I never sold ORANGE now

me thinks me is going to have to build another one soon and have it all legal for the street cruising

me jealous :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
rokhound
Hard Yaka
Posts: 2558
Joined: Sat Apr 22, 2006 12:00 pm
Location: Christchurch

Re: petefj40's new mods. Almst finished!

Post by rokhound »

mike wrote:What are you doing with your old headers pete? I wonder if they can be adapted to fit a rover 8 :wink:

Mike



Or......


They would be a close fit for the 304 in the mutt :wink: :wink: :wink:
Ugly is a state of mind..... and the state of my truck!
User avatar
NJV6
Hard Yaka
Posts: 2751
Joined: Mon Nov 15, 2004 12:00 pm
Location: Southland

Re: petefj40's new mods. Almst finished!

Post by NJV6 »

petefj40 wrote:
mike wrote:What are you doing with your old headers pete? I wonder if they can be adapted to fit a rover 8 :wink:


Engine swap? :shock: What's wrong with the rover V8 Mike?


Going by the avatar I'd say it's growing! :mrgreen:
SWB V6 Paj with one or two mods ;)
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

skid wrote:
petefj40 wrote:Here's another clip. A little bit noise this time. :D

http://uk.youtube.com/watch?v=wdVtQ_LQP3Y



dammit, dammit, dammit

damn you pete

makes me wish I never sold ORANGE now

me thinks me is going to have to build another one soon and have it all legal for the street cruising

me jealous :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:


Do it skid. You won't be sorry.
It sure is alot of fun on the road. Can't wait to get it muddy and stuck in the mud this winter though.

I don't like to brag (really). :oops:

But a couple of days ago some dick head over took trying to get ahead (coz i was just cruising) but then meet me at the next set of lights. I'd had a hard day looking after kids on these school holidays. Leaving the lights I wanted to break traction to let him know i was pissed off at his earlier maneuver. But it back fired. I ended up getting lots of traction and wheel standing from the lights. :oops: :oops: :oops:
I guess i was the one who had the worst manuver at the end of the day. But leaving the lights like that did give me the shits. I'm glad of that track bar now...it works. Nothing snapped. :D
User avatar
Petemcc
Hard Yaka
Posts: 1405
Joined: Wed Sep 14, 2005 12:00 pm
Location: Queenstown

Re: petefj40's new mods. Almst finished!

Post by Petemcc »

I want to see a vid of that. that is awsome!!! Ive always wanted a truck that can lift the front wheels.
User avatar
Jezza
Hard Yaka
Posts: 348
Joined: Wed Feb 21, 2007 12:00 pm
Location: Christchurch

Re: petefj40's new mods. Almst finished!

Post by Jezza »

petefj40 wrote: But it back fired. I ended up getting lots of traction and wheel standing from the lights. :oops: :oops: :oops:

Sweet :D , next time film it :wink:
Isuzu Mu 3.1TD
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: petefj40's new mods. Almst finished!

Post by skid »

Jezza wrote:
petefj40 wrote: But it back fired. I ended up getting lots of traction and wheel standing from the lights. :oops: :oops: :oops:

Sweet :D , next time film it :wink:



yup done that a few times now

it can't be good for the clutch though

had eyewitnesses tell me the front wheels were a half metre off the ground from a standing launch on the grass, lucky it wasn't my truck aye :roll: :roll: :lol: :lol:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
mike
Last minute Mike
Posts: 3545
Joined: Fri Dec 06, 2002 12:00 pm
Location: Christchurch - The place I'd like to be

Re: petefj40's new mods. Almst finished!

Post by mike »

petefj40 wrote:
mike wrote:OMG that sounds bloody amazing. Its like a race car cycling up through the gears :shock:
Might have to get the engine swap done in the landy I think!
What are you doing with your old headers pete? I wonder if they can be adapted to fit a rover 8 :wink:

Mike


Engine swap? :shock: What's wrong with the rover V8 Mike? I thought, for what it is, it got you through some pretty hard stuff in the mud plug last year!

Hey, if you want the headers, there yours. they're no use to me now.


I've got a 3.9 efi sitting in my bros garage waiting to replace the 3.5 Carbed. Take it from a wopping 135hp to 196hp about half yours i reckon :wink:

Seriously that 8 of yours sounds incredible pete. Last time I heard anything that cool was dodzees one but that was only because i was in it getting my brains sucked out (air intake in cab!).
Sweet I'll try and adapt them to the 3.9, hopefully try and get a note or two towards yours :wink: What sort of coin do you want for them 8)

Mike
1973 SWB Land Rover V8 Hybrid
1994 Toyota Surf
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

mike wrote:
petefj40 wrote:
mike wrote:OMG that sounds bloody amazing. Its like a race car cycling up through the gears :shock:
Might have to get the engine swap done in the landy I think!
What are you doing with your old headers pete? I wonder if they can be adapted to fit a rover 8 :wink:

Mike


Engine swap? :shock: What's wrong with the rover V8 Mike? I thought, for what it is, it got you through some pretty hard stuff in the mud plug last year!

Hey, if you want the headers, there yours. they're no use to me now.


I've got a 3.9 efi sitting in my bros garage waiting to replace the 3.5 Carbed. Take it from a wopping 135hp to 196hp about half yours i reckon :wink:

Seriously that 8 of yours sounds incredible pete. Last time I heard anything that cool was dodzees one but that was only because i was in it getting my brains sucked out (air intake in cab!).
Sweet I'll try and adapt them to the 3.9, hopefully try and get a note or two towards yours :wink: What sort of coin do you want for them 8)

Mike


EFI is the way to go I recon. Good one! Once it's setup you could get the fuel mapping tweeked? 8)
As far as the headers go. Once you know they fit or not we'll go from there Mike. I don't want much for them so I wouldn't worry about that. They should be available at the end of next week. I'll leave them at Ricks for ya.
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

I'm up in Nelson at the moment. My mate is showing me some slippery tracks. Both of us had turns getting stuck. OH what FUN! 8)
Image
Image
Image
Image
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: petefj40's new mods. Almst finished!

Post by skid »

nup, I don't believe it :shock: :shock: :shock: :shock:

that must be someone else truck in the pics :? :? :? :? :?

coz you would never take your shiny thing off the road Pete

:roll: :roll: :roll: :roll: :roll: :roll: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
monaro427
Hard Yaka
Posts: 492
Joined: Sat Jun 18, 2005 12:00 pm
Location: where i want

Re: petefj40's new mods. Almst finished!

Post by monaro427 »

na it's not real a bit of cut and paste going on there with that mud in a can stuff sprayed on the wheels and side :D
User avatar
Smurf
Hard Yaka
Posts: 2867
Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson

Re: petefj40's new mods. Almst finished!

Post by Smurf »

monaro427 wrote:na it's not real a bit of cut and paste going on there with that mud in a can stuff sprayed on the wheels and side :D


Must be right Craig, I'm in Nelson and I haven't heard him around...
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: petefj40's new mods. Almst finished!

Post by PR »

Have you seen his ego :mrgreen:
Or you can see if the ratings for coro street went up by 100% in Nelson
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

yeah I know it's hard to believe. It's been a while since it's been dirty. But at least I'm able to have a go. Not like poor old niblik. :lol:
The hill we went up was Redwood Hill. I believe you local guys here in Nelson would know it well? :mrgreen:
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

PR wrote:Have you seen his ego :mrgreen:
Or you can see if the ratings for coro street went up by 100% in Nelson


See my ego Paul? Mate you can HEAR it.
Image
User avatar
Smurf
Hard Yaka
Posts: 2867
Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson

Re: petefj40's new mods. Almst finished!

Post by Smurf »

petefj40 wrote:yeah I know it's hard to believe. It's been a while since it's been dirty. But at least I'm able to have a go. Not like poor old niblik. :lol:
The hill we went up was Redwood Hill. I believe you local guys here in Nelson would know it well? :mrgreen:



Top of the Moutere hills, drop down off the road into a bog at the bottom and a wicked hill climb up at the other end? neat lil play area that, looks like the bog has dried up a bit though, I haven't been in there for a while.
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

Smurf wrote:
petefj40 wrote:yeah I know it's hard to believe. It's been a while since it's been dirty. But at least I'm able to have a go. Not like poor old niblik. :lol:
The hill we went up was Redwood Hill. I believe you local guys here in Nelson would know it well? :mrgreen:



Top of the Moutere hills, drop down off the road into a bog at the bottom and a wicked hill climb up at the other end? neat lil play area that, looks like the bog has dried up a bit though, I haven't been in there for a while.


That's the one. That hill climb is wicked alright! :shock: Couldn't believe me mate getting to the top in his mitz on half worn 33's.
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: petefj40's new mods. Almst finished!

Post by niblik »

petefj40 wrote: It's been a while since it's been dirty. But at least I'm able to have a go. Not like poor old niblik.


oh yeah? really? well, we'll see how far what mods get who.......... *insert fingers icon* :P :mrgreen: :mrgreen:
ImageImage
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: petefj40's new mods. Almst finished!

Post by PR »

I will put money on nibs truck over yours anyday Pete :mrgreen:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Re: petefj40's new mods. Almst finished!

Post by DaveM »

PR wrote:I will put money on nibs truck over yours anyday Pete :mrgreen:

x2 :lol:
User avatar
swampa
Hard Yaka
Posts: 606
Joined: Wed Mar 22, 2006 12:00 pm

Re: petefj40's new mods. Almst finished!

Post by swampa »

x3
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

PR wrote:I will put money on nibs truck over yours anyday Pete :mrgreen:


In the mud. So will I Paul! :shock:

X4 :D :D


But in a straight line on the road, sorry dude. It's, "CHEVY ALL THE WAY". 8) 400 horses on tap will beat him everytime. And if he gets to close to me, I'll throw a blower on it and make 500 horses. 8) 8)
Image
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: petefj40's new mods. Almst finished!

Post by turoa »

petefj40 wrote:
In the mud. So will I Paul! :shock:


Lol, nibs truck probably wont be anywhere near any mud
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: petefj40's new mods. Almst finished!

Post by petefj40 »

I beg to differ. I think once it's done (in 2010 or so) he'll be giving it the hell off road treatment! :shock:
(that's if there's any petrol left to run it)
User avatar
swampa
Hard Yaka
Posts: 606
Joined: Wed Mar 22, 2006 12:00 pm

Re: petefj40's new mods. Almst finished!

Post by swampa »

someone should start up a new thread, " how quick is your car"
User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Re: petefj40's new mods. Almst finished!

Post by DaveM »

[quote="petefj40"]
But in a straight line on the road, sorry dude. It's, "CHEVY ALL THE WAY". 8) 400 horses on tap will beat him everytime. And if he gets to close to me, I'll throw a blower on it and make 500 horses. 8) 8)

mmmm, chevy v8, mmmmm 8)
Another vid with sound giving it full noise please :twisted:
User avatar
2MEKE
Hard Yaka
Posts: 202
Joined: Sun Feb 22, 2004 12:00 pm
Location: Whangarei

Re: petefj40's new mods. Almst finished!

Post by 2MEKE »

petefj40 wrote:...But in a straight line on the road

....a normal offroad situation :roll: :roll: :roll:
Post Reply

Return to “Projects / Mod's”