Ive got a few places in mind on private land through bush etc and up rivers but text me when u wana do it and ill suss the place out 4 us, i just need to give them some notice
project bulldozer
Re: project bulldozer
I duno,
Ive got a few places in mind on private land through bush etc and up rivers but text me when u wana do it and ill suss the place out 4 us, i just need to give them some notice
Ive got a few places in mind on private land through bush etc and up rivers but text me when u wana do it and ill suss the place out 4 us, i just need to give them some notice
Landy SIIa winch truck- 350 chev powered, cruiser axles, 36" simexs - classic goodness
Hilux KUN expedition ute with all the bling
Hilux KUN expedition ute with all the bling
- safari_mulisha
- Hard Yaka
- Posts: 334
- Joined: Mon Aug 21, 2006 12:00 pm
- Location: hamilton...under a safari
Re: project bulldozer
next long week end...
make it EXTREEEEEEEEEEEM
you must know i love cruising up creeks and rivers
make it EXTREEEEEEEEEEEM
you must know i love cruising up creeks and rivers
Re: project bulldozer
nah its local so can go up 4 just an afternoon or whatever.... the river gets nice and deep in places too lol
Landy SIIa winch truck- 350 chev powered, cruiser axles, 36" simexs - classic goodness
Hilux KUN expedition ute with all the bling
Hilux KUN expedition ute with all the bling
- safari_mulisha
- Hard Yaka
- Posts: 334
- Joined: Mon Aug 21, 2006 12:00 pm
- Location: hamilton...under a safari
Re: project bulldozer
ok getting places now
list of mods i have done
chromoly rear trailing arms with 3/4-3/4 chromo hiem joints
chromo panhard bar
rear locker,front lsd
36x14 simex extreme trecker 2 x 5
11inch wide bead lockers
4 inch dobison lift
2 inch body lift
fuel tank mounted above chassis
ute chop and tube frame tray
efs extreme shocks up front ome shocks rear
huge thick as api pipe drag links with GU ends
just completing mk knuckle swap for high steer lifts the drag links 200mm
large turbo conversion to be intercooled and swapped for smaller turbo possibly rb25det
3 inch exhaust and dump pipe (sounds like a log skidder)
wheel base lengthend by 7 inches
ralleye 4000 flood lights
sealed beam head lights $60 for both.... everyone has to do this
fully sealed intake with all diff/winch/gearbox breathers goin into intake
after market vacuum solinoids
things still to be done
exo cage (dixie!!!)
rear adjustable bump stops and spring retainers still to be fitted (sitting on work shop bench)
tv,fridge,mp3 player,sub,amp,6x9s and spa pool
im sure there is lots more i cant think of right now
did about 15 hours on it last week end altho i was pretty tired after 65 hour week
list of mods i have done
chromoly rear trailing arms with 3/4-3/4 chromo hiem joints
chromo panhard bar
rear locker,front lsd
36x14 simex extreme trecker 2 x 5
11inch wide bead lockers
4 inch dobison lift
2 inch body lift
fuel tank mounted above chassis
ute chop and tube frame tray
efs extreme shocks up front ome shocks rear
huge thick as api pipe drag links with GU ends
just completing mk knuckle swap for high steer lifts the drag links 200mm
large turbo conversion to be intercooled and swapped for smaller turbo possibly rb25det
3 inch exhaust and dump pipe (sounds like a log skidder)
wheel base lengthend by 7 inches
ralleye 4000 flood lights
sealed beam head lights $60 for both.... everyone has to do this
fully sealed intake with all diff/winch/gearbox breathers goin into intake
after market vacuum solinoids
things still to be done
exo cage (dixie!!!)
rear adjustable bump stops and spring retainers still to be fitted (sitting on work shop bench)
tv,fridge,mp3 player,sub,amp,6x9s and spa pool
im sure there is lots more i cant think of right now
did about 15 hours on it last week end altho i was pretty tired after 65 hour week
Re: project bulldozer
safari_mulisha wrote:exo cage (dixie!!!)
gota love them exos
99 pajero exceed 3.2
Re: project bulldozer
safari_mulisha wrote:
things still to be done
exo cage (dixie!!!)
rear adjustable bump stops and spring retainers still to be fitted (sitting on work shop bench)
tv,fridge,mp3 player,sub,amp,6x9s and spa pool
You forgot the kitchen sink
- safari_mulisha
- Hard Yaka
- Posts: 334
- Joined: Mon Aug 21, 2006 12:00 pm
- Location: hamilton...under a safari
Re: project bulldozer
some pics of parts and my messy shed


chopped out gaurds no chance of flexing into them

rear mounted battery gives more room up front

alloy door cards....

standard shock compared to what im using now



chopped out gaurds no chance of flexing into them

rear mounted battery gives more room up front

alloy door cards....

standard shock compared to what im using now

Re: project bulldozer
looks like a weapon, when are you bringing it to welly to get stuck?
Re: project bulldozer
hey mate,
just been looking through your project build,
what did you use for your turbo manifold?
cheers,
kyle.
just been looking through your project build,
what did you use for your turbo manifold?
cheers,
kyle.
- gary_in_nz
- Hard Yaka
- Posts: 636
- Joined: Thu Mar 15, 2007 12:00 pm
- Location: Hawkes Bay
- Contact:
Re: project bulldozer
wheres this project up to??
"If it ain't V8, take it back"
Warning: Opinions and Expressions may offend.
Warning: Opinions and Expressions may offend.
Re: project bulldozer
a big steel square manifold
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered