cert?

Starting a project or modification? Then post it's progress here and show us some pic's.
Post Reply
User avatar
Poacher-HILUX
Hard Yaka
Posts: 109
Joined: Thu Nov 08, 2007 12:00 pm
Location: Otematata

cert?

Post by Poacher-HILUX »

If i do a lift for my hilux. lets say a 40mm body lift. because it is under 50mm does it need to be certed?

cheers
User avatar
1nzsafari
Hard Yaka
Posts: 106
Joined: Fri Oct 20, 2006 12:00 pm
Location: otago

Re: cert?

Post by 1nzsafari »

yes all bodylifts have to be certed. up to 50mm spring lift does not ,talking to fitzy (one of the cert guys in dunedin) last week about doing this on my hilux.
User avatar
Steve_t647
Hard Yaka
Posts: 998
Joined: Wed May 17, 2006 12:00 pm
Location: Christchurch City, In front of the computer

Re: cert?

Post by Steve_t647 »

WOF guy's are getting picky on the spring lifts too, the wording in the Warrant man's books has or is changing to anything that affects the centre of gravity, this will mean wheel size we get away with now will be picked up and springs on the old leaf springs and older 4wd's where they only gave official factory measurements to the wading height and diff clearance you will still have the 50mm as there are no factory measurements.

This new change was mainly brought in to control the lowering of vehicles so they can be checked for steering issues and bump stop clearance etc but it looks like it will affect us too.

Stupid they have to re write the rules to something so generic for a particular problem that it depends on who you see, there should be an if raised check and an if lowered check system, funny think is old softer springs will be picked up too.
Legal disclaimer: Any information I may have provided is worth exactly what you paid me for it.
User avatar
aroma
Hard Yaka
Posts: 753
Joined: Sat Apr 21, 2007 12:00 pm
Location: christchurch

Re: cert?

Post by aroma »

and also going bigger tyre sizes by more than 5% nerds cert looked in to it the other day so going 31 to 33 I belive is out side the 5% mark and also stuffs up spedo
:D
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: cert?

Post by skid »

Steve_t647 wrote:WOF guy's are getting picky .



you're telling me
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
Post Reply

Return to “Projects / Mod's”