winch for sale

hosehustler · Post by **hosehustler** » Wed Dec 07, 2005 7:33 am

Here's a pic of the winch one of my mates is selling, apparenty they retail at a local dismantling firm for $1700+GST=$1912.50 :shock:

Apparently one of the best and strongest electric low mount winches you can buy.
It was a factory winch off a 80 series Toyota landcruiser and has never ever been used :!:

I have also added a short e-mail he sent me, any queries just ask :wink:

His e-mail to me.........

Picture of winch, AI-1000, 9000 lb, the winch is actual manufactured by Aisin who make the Toyota free wheel hubs etc, as I said it is new, I plugged it in last week to make sure it went, the controller unit is still cable tied from factory.

The other cable coming from the winch is the factory heavy duty solenoid which goes to the battery, if you don't have that the switch gear gets a hard time so you need that cable.

Let me know if you know anyone who is keen.

wjw · Post by **wjw** » Wed Dec 07, 2005 9:49 am

Can you pm me his phone number, I need his frame and model numbers to check it will fit

hosehustler · Post by **hosehustler** » Wed Dec 07, 2005 10:17 am

Hi Bill,
here's the messge I got back from Paul

Frame number HDJ81 00557876
Model number KC-HDJ81V-RNPGW

I measured the bolt hole centres on the winch, they are 720mm, the bolt centres on the Prado chassis are 670mm, there is enough room on the base plate to redrill the holes to fit the Prado chassis

Hope this helps :!:

wjw · Post by **wjw** » Wed Dec 07, 2005 2:25 pm

Cool

just waiting to hear back from toytota...

also should have motor for my truck on Friday...

Only snag is a busted engine mount, ordered that today, so hopefully have it by friday

hiriklux · Post by **hiriklux** » Thu Dec 08, 2005 5:59 pm

yep ill vouch for those winches i have one on the front of my ute it works when fully submerged and will still tow a house down i made a mout for my ute which did the job and just made another welded one weld not to pritty so toyota guru steve is gonna prittyfie it abit for me i paid 300 hundy for mine as the guy could not get it to work out of the buy and sell so obviously a bargain so this one sounds a bit pricey to me but dont worry to much about it fitting to the vehicle there is always a way my 2c worth
rik
ps how did you get on with a house bill

hosehustler · Post by **hosehustler** » Thu Dec 08, 2005 6:07 pm

The price is $1200 :!:

oldblue · Post by **oldblue** » Thu Dec 08, 2005 9:37 pm

Just make sure you have the correct voltage on the winch to suit the truck

nigelb · Post by **nigelb** » Tue Dec 13, 2005 2:12 pm

Hosehustler (where did you get that name?) could you please let me know what the voltage is?
80 Series Cruisers are 12Volt aren't they?

Cheers

nigelbnz

1lurch · Post by **1lurch** » Tue Dec 13, 2005 8:56 pm

one winch is enough for any driver , dont be greedy !!!

our president has a winch sitting at home that would go on your wagon , or another very similar

hosehustler · Post by **hosehustler** » Wed Dec 14, 2005 7:19 am

12 volt

oldblue · Post by **oldblue** » Wed Dec 14, 2005 8:54 am

Ilurch, the presadent's winch will be 24V as it's off a PZJ70.

Leithfield · Post by **Leithfield** » Mon Feb 13, 2006 12:57 pm

Is this still available?

oldblue · Post by **oldblue** » Wed Feb 15, 2006 9:13 pm

Ill ask him and get a reply asap
Kevin

hosehustler · Post by **hosehustler** » Wed Feb 15, 2006 10:32 pm

long gone i'm afraid anf for well over a grand :shock:

oldblue · Post by **oldblue** » Thu Feb 16, 2006 6:46 pm

The Presadent's winch is still in his basement, It's for sale, came off a Landcruiser PZJ70 24V Toyota electric, complete but minus the rope. Never been used in NZ . Contact me on oldblue@clear.net.nz