Hi guys,
I have just purchased a uhf cb radio and need to know of any issues when choosing a position for the arial, I also have a normal radio arial on the front L/H gard and an AM CB arial on the front R/H gard. Are there any issues with having one arial close to another??
Cheers,
Brian.
CB arial help
Re: CB arial help
i think from memory min spacing for UHF is 450mm from another aerial, mounting will depend on the type of aerial, if it has a built in groundplane device (looks like a 20mm thick tube at base about 20cm long) it can go just about anywhere on truck the higher the better, if it needs a groundplane (large metal suface) it should be mounted to something steel ie bullbar bonnet roof etc for best reception. see aerial manufacturers web page or try: http://www.mobileone.com.au/
Cheers
Cheers
If you follow me in the bush you must be mad cause I'm plain CRAZY !!!
1987 BJ74, 13BT, Auto, 35" Wranglers, 80mm Suspension Lift, 2" body lift, LSD rear, ARB Front Locker, PTO, Lots of Steel and a Go Hard Driver.
1987 BJ74, 13BT, Auto, 35" Wranglers, 80mm Suspension Lift, 2" body lift, LSD rear, ARB Front Locker, PTO, Lots of Steel and a Go Hard Driver.