body lift

[scotty36]

hi all looking for a body lift for my LWB safri can some noe help me thanks

[skid]

same response that most people get

how high

have you looked on turd me

or http://www.4wdbits.co.nz/ProductDetails ... uctID=1117


and the main answer.................

where the hell are ya, as theres plenty of locals who can make stuff for ya, but ya have to tell us where you're hiding


cheers

SKID

[scotty36]

got a lift kit out off a nissan safari that the car sale that had .THE nissan they could not sale with the lift i swap them over .it litfed my about 3" now runing 315x75 16 about 35" there are just hitting the front mud flap sow would like about 2" body lift

[Sadam_Husain]

Have a look at some of the old threads coz some of the nissan guys have found they start cracking body mounts with lift blocks and recently we saw the back of suzuki1k's safari bounceing all over the place coz his rear body mounts had cracked and broken through

[PR]

now runing 315x75 16 about 35" there are just hitting the front mud flap

Just put spacers in the front trailing arms 25mm should do you, it pushes the axle forward

[scotty36]

HI thank for that many look in to that

[tgaguy1]

now runing 315x75 16 about 35" there are just hitting the front mud flap

Just put spacers in the front trailing arms 25mm should do you, it pushes the axle forward

Standard arms only allow for a 12mm spacer before you run out of thread on the rear nut. Dont forget to install a 12mm crush tube as well.

[Taz]

Have a look at some of the old threads coz some of the nissan guys have found they start cracking body mounts with lift blocks and recently we saw the back of suzuki1k's safari bounceing all over the place coz his rear body mounts had cracked and broken through

I've got a LWB and for the reason Sadam mentioned am shying away from a body lift. I was going to still go one inch but going to flag it now. In saying that though I remember reading that some people put a few more smaller bolts around the main ones in the back mounts to help stop cracking. Might be somthing to look into.