hose goes (nice beam axle surf)

Selling or wanted vehicles.
Post Reply
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

hose goes (nice beam axle surf)

Post by hosehustler »

Most of you would have seen it up for sale on Trademe a few months ago, I had a purchaser lined up (friend of friend) has been unable to come up with the funds.
It's still up for sale, would be an ideal rig for somewhere here, or if you know someone wanting a well set up truck without having to do all the work themselves.
It really needs a new home, someone motivated to get into the rock scene, or club weapon, or stick a set of 33's on and would make a great winch truck for the new clubman class, would really benefit with the addition of an exo, but to be honest, I've lost interest and young family are into everything except 4x4, it has done 2 offroad trips since December when I originally listed it and one of those was when It had a laydown on it's side as it had been a long day and it was tired :lol: (it's had a new body since then)
It's very economical for an offroad vehicle, parts are cheap and does extremely well with fuel consumption. e.g got form Hokitika to Brooklands (nth of CHCH) and used 40litres.
Has done one trip to the coast (went superb) since the Trademe listing and as expected on the coast it got a couple of new very minor body bruises.
A couple of notes.
1, it was certified with 15x8 rims (has 15x10's now).
2, will need the flares extended before next warrant.

Here's a link to when it was on trademe......
http://www.trademe.co.nz/Browse/Listing.aspx?id=163064499

I will be listing it again on trademe in a week or 2.....
If you are genuinely interested or know someone that is, phone 0272074454
Tim
I hate signatures
User avatar
red-devil
Hard Yaka
Posts: 987
Joined: Mon May 01, 2006 12:00 pm
Location: Christchurch
Contact:

Re: hose goes (nice beam axle surf)

Post by red-devil »

Sad to see you've got your beast up for sale.

i to have a young family and i am thinking that lili may not wont to go 4x4 wih her old man :cry:

tim thanks for all the training you gave me through NC4X4 and ORE

Jonathan
User avatar
badnuz
Hard Yaka
Posts: 2367
Joined: Sat Aug 11, 2007 12:00 pm
Location: Melbourne
Contact:

Re: hose goes (nice beam axle surf)

Post by badnuz »

are you still after the same money?? DBW i see you looking here, you should buy it!
i used to Cruise, now i PATROL
User avatar
Dace
Hard Yaka
Posts: 981
Joined: Fri May 04, 2007 12:00 pm
Location: Te Horo, Kapiti

Re: hose goes (nice beam axle surf)

Post by Dace »

badnuz wrote:are you still after the same money?? DBW i see you looking here, you should buy it!


LOL, I was looking but only dreamin about buying it, tell ya what, you buy it and i will drive it for ya :wink:
Got a Daihatsu Something, hasn't got a Daihatsu engine.... or diffs.... and it doesn't have windows.... or doors.... but its got tyres.... :)
User avatar
Jafa
Hard Yaka
Posts: 1307
Joined: Mon Nov 01, 2004 12:00 pm
Location: Katikati

Re: hose goes (nice beam axle surf)

Post by Jafa »

No No DBW, you bring your lux in to see me, and we'll kit it out the same as Tims! :lol: Most of Tims gear came from us :lol:
Wont cost ya much, honest! :lol: :lol: :roll:

Sad to see ya sell it Tim, I was looking forward to wheeling with you at xmas :cry: Ahh well maybe you'll still have it then :?
'85 Hilux crawler, 3rz, duals, 4.7's, 4.88's, ARB's, 30 spline Longfields, 6 stud SNR4x4 Histeer, Airshocks up front, coiled rear, 40" Iroks.
^^^this shite is all about to change....^^^

021 273 9942
jafa@inspire.net.nz
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: hose goes (nice beam axle surf)

Post by niblik »

theres an idea jafa.. make an alter ego on tard me and do false bids, then tim will have to keep it! :wink:

kiddin tim, good luck on the sale guy..
ImageImage
User avatar
Dace
Hard Yaka
Posts: 981
Joined: Fri May 04, 2007 12:00 pm
Location: Te Horo, Kapiti

Re: hose goes (nice beam axle surf)

Post by Dace »

Jafa wrote:No No DBW, you bring your lux in to see me, and we'll kit it out the same as Tims! :lol: Most of Tims gear came from us :lol:
Wont cost ya much, honest! :lol: :lol: :roll:

Sad to see ya sell it Tim, I was looking forward to wheeling with you at xmas :cry: Ahh well maybe you'll still have it then :?


hmm, sounds like a very good plan, will have to discuss when I next see ya (just don't tell the wife :oops: )
Got a Daihatsu Something, hasn't got a Daihatsu engine.... or diffs.... and it doesn't have windows.... or doors.... but its got tyres.... :)
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Re: hose goes (nice beam axle surf)

Post by hosehustler »

badnuz wrote:are you still after the same money??


When I put it back on trademe I will be doing a listing rather than an auction as I removed last time due to a time waster (he was genuine at the time), don't want that hassle again. I'm looking at removing winch and bar and listing it for $11,000.
If someone from here is interested before I trademe, it's $11,000 firm as it sits..
I hate signatures
User avatar
SMOKEY
Hard Yaka
Posts: 1011
Joined: Thu Oct 14, 2004 12:00 pm
Location: CHRISTCHURCH

Re: hose goes (nice beam axle surf)

Post by SMOKEY »

Hi Tim , I know this topic is about selling your vehicle and I wish you all the best with the sale and whatever pursuits you follow with your family. I am posting here to thank you for all the effort and time you have unselfishly put into ORE Ass, ORE Forums and helping us all out with training , Trips and vehicle modification. It has been a pleasure to have been a part of you and your family's 4WD trips and I hope that with the sale of your vehicle we haven't seen the last of you.

MEMORIES LAST LONGER THAN DREAMS,

FITZY.
Kevin Fitzgibbon.
User avatar
albundy
Rolly Polly
Posts: 2631
Joined: Tue Sep 07, 2004 12:00 pm
Location: Lismore, NSW, Australia

Re: hose goes (nice beam axle surf)

Post by albundy »

I suppose with him being my bro-in-law and all, I could let him be my winch bitch.. :wink:
Al
rain, hail, sleet or snow, we go!
User avatar
madaz068
Hard Yaka
Posts: 994
Joined: Tue May 30, 2006 12:00 pm
Location: Taranaki
Contact:

Re: hose goes (nice beam axle surf)

Post by madaz068 »

albundy wrote:I suppose with him being my bro-in-law and all, I could let him be my winch bitch.. :wink:
Al

Does the Nissan need one? :twisted:
User avatar
nstg8a
Hard Yaka
Posts: 461
Joined: Wed Oct 17, 2007 12:00 pm
Location: Brisbane (ex nelson)

Re: hose goes (nice beam axle surf)

Post by nstg8a »

now that is one damn cool surf.... whoever gets that is gonna be one lucky bugger...
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Re: hose goes (nice beam axle surf)

Post by hosehustler »

I hate signatures
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Re: hose goes (nice beam axle surf)

Post by hosehustler »

*SOLD*
I hate signatures
User avatar
fweddy
Hard Yaka
Posts: 1062
Joined: Fri Oct 13, 2006 12:00 pm
Location: North Canterbury

Re: hose goes (nice beam axle surf)

Post by fweddy »

oh no!

Get a decent amount of coin for it?

What part of the country should we spy it now?
Sold my 1985, BJ74 MWB Landcruiser, rear locker, 33" MTs, snorkel, PTO winch, solid bars all round, spotties, AM CB etc.
Now just a 1994, 1kz Surf, pretty standard.
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Re: hose goes (nice beam axle surf)

Post by hosehustler »

fweddy wrote:oh no!

Get a decent amount of coin for it?

What part of the country should we spy it now?


I got my ore asking price, it's off to Invercargill tomorrow morning

new project begun some time ago...............
I hate signatures
Post Reply

Return to “4WD's Forsale / Wanted”