Terrano Injection pump

[Selwyn]

Hi,
Ive just changed the top and side cover seals to my injection pump and stuck it back together and now it will not start. I have primed and bleed it with no luck, I have diesel to the pump but is not pumping thru to the injectors.

Can anyone help

Regards

[wopass]

seal slipped maybe ? bleed each line individually ? maybe ?

[krawlr]

when youre bleeding are you pumping the plunger till its firm?

might be like those new rodeos,might have to do the old comp air trick


let us know ?????

[Selwyn]

Thanks for info.
Pump is tighting, loosening screw at inlet ,diesel pumping into pump, removing return hose, diesel coming out the other end of pump.
But when connecting all back up then turning it over and lossening injector nut to motor no diesel coming thru.

Regards

[krawlr]

ok get youre self a dust or blow gun wrap a rag around it and jam it into youre filler hole so its nice and sealed and get someone to crank it while you do this.......(obviously youre trying to pressurise youre fuel tank!)

i hope this is clear as mud ,get to it............


let me know how ya get on one thing ay a time bud

[dctecho]

maybe a silly question but did you reconect the wire to the electric stop solenoid on the pump??? just a thought.

[wopass]

maybe a silly question but did you reconect the wire to the electric stop solenoid on the pump??? just a thought.

ive done that once...very embarresing ... but so funny for everyone else

[Selwyn]

Firing on all injectors.
Was the governing screw at the back of the pump, hadn't wound it in far enough and was resticting the diesel flow to the injectors.

Thanks all for your help