
November 1st- Canterbury trip??
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
November 1st- Canterbury trip??
gidday all, i have rescently upgraded my truck to beam axles and 35's, if all goes well ill have the finishing touches on my truck by end of working week, ready for this comnig weekend. Anyone keen for some trip?? worselys- ashley river- selwyn river? or someone have another place? If anyone has any ideas of a nice trip or want to do one of hte three i mentioned leave message. I just want to go out dont mind the difficulty level 

1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
Re: November 1st- Canterbury trip??
Im most likely going up to Hanmer to watch the winch challenge otherwise id be keen to go somewhere.
Ive never been up the Selwyn am keen to go there sometime.
Ive never been up the Selwyn am keen to go there sometime.
Re: November 1st- Canterbury trip??
ashley track has a couple good bits at the moment, I mite be keen for that
Re: November 1st- Canterbury trip??
Come out to the winch challenge and get a look at the tracks. These tracks will be open to the public in the form of a 4wd park. It is shaping up to an interesting weekend.
Al
Al
rain, hail, sleet or snow, we go!
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
Re: November 1st- Canterbury trip??
hmmm can i go on it without paying??? i jsut want to test my truck, as ive done a shitload of work, and jsut sent my truck back in just a min ago to get raised abit mroe as tyres are rubbing, and panel beating my wheel arches costs to much as no panel beater wants to touch it
if i got to pay id much prefer to stay closer to christchurch and go somewhere aroudn here, id been keen for ashley river again... i went up not long ago after the rain and it was a good trip

1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
Re: November 1st- Canterbury trip??
who did your S.A.S.? u still running the same tyres?
Re: November 1st- Canterbury trip??
might be keen nick,depends on when and where dude 

Re: November 1st- Canterbury trip??
i woulda been keen but i will be heading to hanmer
went up ashley track friday was a 2wd job then went to the mak on sat that was 10 times funner
went up ashley track friday was a 2wd job then went to the mak on sat that was 10 times funner
on my 3rd POS 70 cruiser still havent learnt
Death to the competition
Death to the competition
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
Re: November 1st- Canterbury trip??
waimak is stupid, 1) its bad for your truck, 2) way to easy for my truck 3) to many dickheads???(can i use that in forums??) go there, ummm where and when?? i dont mind suite yourself name a time n palce? ashley river being 2wd??? depends where you go there mate? i went there with the club during the floods and peopel was getting stuck and water logging their trucks
, sometime saturday? if not ill head to the hanmer stuff and see if i can enter my truck?? lol i know waimak is close and easy to get to, but also depends, myself id only go after alot of rain, otherwise its like driving on the road no fun, ill go where ever someone is keen to go though

1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
Re: November 1st- Canterbury trip??
ooo yeah im running 35" tyres now so yeah, i need to test the travel out on the magain as ive raised my truck more to try stop them rubbing, as i went to 2 panel beatters today asked them if they make my wheel arches bigger, they said they dont wont to get involved with my truck cause its gonig to be insanely complecated to refab all the parts to make my truck work, and they said if they did do it theyl charge between $4,000 (crap finish( up to $10,000 (good neat finish) so yeah i jsut putting 40mm spacers in to lift the body up abit more, then if its still rubbing going to throw some spacers into the beam axel to stop it travelling os much.... all up ill ahve a umm... 130-150mm body raise
1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
Re: November 1st- Canterbury trip??
shit nick , ya might be to big 4 my little old jeep now...can ya see over the bonnet dude...



v8 tj...luvs the gas......
- rangimotors
- Hard Yaka
- Posts: 1631
- Joined: Thu May 10, 2007 12:00 pm
- Location: chch
Re: November 1st- Canterbury trip??
nickcampbell wrote:way to easy for my truck.
ashley river being 2wd??? depends where you go there mate? i went there with the club during the floods and peopel was getting stuck and water logging their trucks
How much driving have you done in you newly modded truck? Follow zookfest he'll still get ya stuck

Never argue with an idiot, they drag you down to their level then beat you with experiance!
Re: November 1st- Canterbury trip??
You seem to be developing a problem that many have...they modify there truck to be much more capable...then they have trouble finding places to go that are challenging.....maybe you should of left your truck how it was then youd be able to find lots of challenging places to play easily....its kinda boring being able to not get stuck lol
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
Re: November 1st- Canterbury trip??
na man, i was having huge problems with the hilux difs, so i broke my 2nd hilux dif was liek screw this im making my truck stronger... so i got the beam axel done, was pondering one day was like hmm mars well throw sum 35" on it to save money isntead of doubling up my cert,, soo got 35" aswell.. then i had trouble because my rear wheel arches wernt big enuf to give 35" tyres the travel so i had to option, one to either get a panel beatter to cut them bigger(to expensive) or to do aonther body lift(40mm) which i did
1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
Re: November 1st- Canterbury trip??
but i dont mind ae, theres some parts of the waimak which require 35" tyres now ive found, due to the floods, theyve made the ruts so deep and muddy 33" tyres bottom out ae, but i jsut liek 4x4 dotn acre if its not extreme, jsut driving or being apart of it is good enough for me, so anyone wont to say where to go on saturday, or you all heading up to hamner?
1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
- nickcampbell
- Hard Yaka
- Posts: 160
- Joined: Wed Feb 06, 2008 11:38 am
- Location: Christchurch, NZ
Re: November 1st- Canterbury trip??
rangimotors wrote:nickcampbell wrote:way to easy for my truck.
ashley river being 2wd??? depends where you go there mate? i went there with the club during the floods and peopel was getting stuck and water logging their trucks
How much driving have you done in you newly modded truck? Follow zookfest he'll still get ya stuck
ive done one test drive, jsut to see what needs to be done, umm ive driving a few hundred km's on-road otherwise i ahvent done anything... end of this week will be a test drive to see if this 2nd body raise was of any use!!! or jsut $500 wasted, anways ill stop spamming my post, and yeah anyone that wants to have a paly somewhere give me a txt or leave a message here
1995 71series cruiser, 33" Maxxis Buckshot, front + rear lockrite, 50mm body lift
- spankmeister
- Hard Yaka
- Posts: 159
- Joined: Sat Jul 01, 2006 12:00 pm
- Location: Christchurch
Re: November 1st- Canterbury trip??
Hey Nick,
It's nice hearing about your truck, but could you take a little more time to spell check your posts? The last 2 or 3 were shocking.
Cheers
It's nice hearing about your truck, but could you take a little more time to spell check your posts? The last 2 or 3 were shocking.
Cheers
Mike - PM me for phone number
* LN65 D/Cab * Snorkel * 50mm Lift * 33" Mud's * 3.8 V6 *
* LN65 D/Cab * Snorkel * 50mm Lift * 33" Mud's * 3.8 V6 *
Re: November 1st- Canterbury trip??
i think everyone is going to the winch challenge nick, might go myself for a look.....
v8 tj...luvs the gas......
Re: November 1st- Canterbury trip??
hey fella if u not up to much today u would be up for a shoot up the worsleys i just put in a new parhard rod steering damper set up and need to test that out as well if u keen to pop out? gives a txt 0275391365 of u are
Re: November 1st- Canterbury trip??
i could head up there too but ill have to wait for lili to wake up. ill be takin it easy thou
Re: November 1st- Canterbury trip??
thats all good i have to be nice to just got to take it and gets sum action shots for a guy in levin
Re: November 1st- Canterbury trip??
how does 1030 sound. lili is eatin breakfast at the mo
Re: November 1st- Canterbury trip??
lets go 1045 sams still got to get dress u wanta meet just passd the gate
Re: November 1st- Canterbury trip??
that works for me.
ill only be up there for about n hour as i have to get lili back to bed around 12.
jono
ill only be up there for about n hour as i have to get lili back to bed around 12.
jono
Re: November 1st- Canterbury trip??
Ok so this little drive was not as good as hamner event but hay the three trucks had fun.






Re: November 1st- Canterbury trip??
its quite easy to see why his rear springs keeped falling out
Re: November 1st- Canterbury trip??
mmmmm no comment. after looking at that pic
i think he needs his rear sway bar connected back up
if you look very closely you can see it lose in the wind
i think he needs his rear sway bar connected back up
if you look very closely you can see it lose in the wind