well suppose id better start hanging around in here now :)

For all Mitsubisih related topics

Post Reply
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

well suppose id better start hanging around in here now :)

Post by meece4x4 »

Hey all, well after making a pest of myself in the Diahatsu Forum ive discovered that they are a great little beastie but they are just too small for a family of 4, went shopping with a very very limited budget for something a little bigger, Stumbled on this old 88 LWB Gen 1 Pajero for $1400, havnt had a chance to take it offroad yet as i only picked it up last weekend and have spent this weekend changing oil/filters etc .. it's only got 190 000 k's on the clock but it was 10000k over it's last oil change and the air fillter was so chocked with dust im supprised it ran at all even with new filters etc its sure no speed deamon, seems to just amble up to 100kph rather than accellerating! :lol: altho it seems to have plenty of torque.

the prevous owner has replaced all the shocks the rear ones seam to be 4 way adjustable (they have a little slot for winding a cam type thing around from 1-4) and discovered that it has a LSD .. how good are the Gen 1 LSD's ?? my Daihatsu had one originally but i killed it within a few weeks of offroading.

would a 8000lb winch be suitable for these things?? not looking a winch challanges lol just something to pull it out of the sand/mud on the odd time i get stuck. :D

Not going to do too much to this one for a little while, as most of my 4wding as of late has been on sand, might add a winch and call it quits for now, it has Dunlop Wranger at/r's fitted that are near new so ill wear them out before i bother with new rubber, what are the Wrangers like as a "general AT" type tyre??

anyways here a "before" foto :) all ive done this weekend is add the CB and fit a new setero.

Image
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
User avatar
NJV6
Hard Yaka
Posts: 2751
Joined: Mon Nov 15, 2004 12:00 pm
Location: Southland

Re: well suppose id better start hanging around in here now :)

Post by NJV6 »

Hi there,

Not quite so sure on liking the idea of a 4D56 being 10k over its service on an inheritly dirty indirect design... But anyway you got it for a good price.

Yes the Safari springs will go in the back if you got a coiled one which is must be. The rear radius arms on that model can crack when used for lots of offroading.

Get some bigger wheels for it and a set of manual hubs. An 8000lb winch won't be to bad if it is hardly ever being used - you can double it if req'd.

The LSD's are typically one of the best made but that one is 20 years old so may not be optimum!
SWB V6 Paj with one or two mods ;)
Post Reply

Return to “Mitsubishi”