27th - 28th, Xmas over and done with.

Post what you achieved in the weekend.
Include the date of the weekend eg 25/02/2006
Thanks to Turoa for a great forum idea!
User avatar
madaz068
Hard Yaka
Posts: 994
Joined: Tue May 30, 2006 12:00 pm
Location: Taranaki
Contact:

27th - 28th, Xmas over and done with.

Post by madaz068 »

Ill be down at the BBQ with the boys tomorrow, put a bloody nail through my foot yesterday, that sucks, but hey was a good day spent with mates (thanks Ron for the nail :lol: ).

Also took hub apart on Prado, not looking good, all the little shalf things are broken. Started wiring for Pump and plugs

Merry New Year for next week
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

Re: 27th - 28th, Xmas over and done with.

Post by meece4x4 »

The work on the Pajero continues, This time i got the Mrs to remove the dinged, rusty and bent running boards and fit the homemade snorkel, leaving me the easy job of fitting the internal pumbing once we flip the airbox 180 deg to shorten the amount of pipe needed to get to the snorkel pickup.

Image

and yes that IS the mrs under the pajero :wink: :mrgreen:

Image
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by safaripete »

finally done a well over due oil change on safari
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 27th - 28th, Xmas over and done with.

Post by coxsy »

re pajo, couldn't you let her use a jack to lift it abit so it not so full in her face ya meanie :D
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: 27th - 28th, Xmas over and done with.

Post by xj »

RJ and I shot up Thompsons for a quick squiz and a bbq at the x-roads. Tracks all pretty tame, 2wded most of the way up. Summit track was a breeze. Things turned to shite when the rain came down heavy and i ducked into the pines 1/2 way to the summit to put my top up and my doors back on. We went for a little skid down on the pine needles and lockers or not, wasnt gettin back up the way i came, and the way i came was the only way. Pulled out the winch rope, only to discover that the rope retaining bolt was AWOL and the wire was just spinning on the drum........ hermmmm...... got that sorted, then one solinoid decided to only work when it wanted too........... it took a while.
All a bit of fun and games. Took a virgin newb up with me, never been offroad before..... im picking we might have a convert!!!!
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
Moriarty
Hard Yaka
Posts: 1205
Joined: Wed May 31, 2006 12:00 pm
Location: The newly formed Nation of OKATO

Re: 27th - 28th, Xmas over and done with.

Post by Moriarty »

xj wrote:RJ and I shot up Thompsons for a quick squiz and a bbq at the x-roads. Tracks all pretty tame, 2wded most of the way up. Summit track was a breeze. Things turned to shite when the rain came down heavy and i ducked into the pines 1/2 way to the summit to put my top up and my doors back on. We went for a little skid down on the pine needles and lockers or not, wasnt gettin back up the way i came, and the way i came was the only way. Pulled out the winch rope, only to discover that the rope retaining bolt was AWOL and the wire was just spinning on the drum........ hermmmm...... got that sorted, then one solinoid decided to only work when it wanted too........... it took a while.
All a bit of fun and games. Took a virgin newb up with me, never been offroad before..... im picking we might have a convert!!!!



You with a virgin........ nah, I dont want to think about it.

Sign him up in our Kiwi club. XJ..... Only $38-00
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

Re: 27th - 28th, Xmas over and done with.

Post by meece4x4 »

coxsy wrote:re pajo, couldn't you let her use a jack to lift it abit so it not so full in her face ya meanie :D


she wont get under the truck if its just on a jack :wink: and we dont have any axle stands .... and besides theres a good 6 inches more room on the other side of those running boards :lol: :lol: :lol:

off to Bayleys tommorow for a play :mrgreen:
Last edited by meece4x4 on Fri Dec 26, 2008 5:22 pm, edited 1 time in total.
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: 27th - 28th, Xmas over and done with.

Post by xj »

Moriarty wrote:You with a virgin........ nah, I dont want to think about it.

Sign him up in our Kiwi club. XJ..... Only $38-00


Come on bobby.... you know that aint gunna happen
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
gimmemud
Hard Yaka
Posts: 1043
Joined: Tue Oct 24, 2006 12:00 pm
Location: North Auckland

Re: 27th - 28th, Xmas over and done with.

Post by gimmemud »

Gave the surf a precautional oil change after the new motor got put in a few weeks ago. Old oil came out nice and clean so looks like she's a goody :D
User avatar
fj40
Hard Yaka
Posts: 317
Joined: Thu Oct 05, 2006 12:00 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by fj40 »

safaripete wrote:finally done a well over due oil change on safari

about time 10liters of oil was it :lol: :lol:
its not how big the 4x4 is its how angry the diver is
User avatar
Moriarty
Hard Yaka
Posts: 1205
Joined: Wed May 31, 2006 12:00 pm
Location: The newly formed Nation of OKATO

Re: 27th - 28th, Xmas over and done with.

Post by Moriarty »

xj wrote:
Moriarty wrote:You with a virgin........ nah, I dont want to think about it.

Sign him up in our Kiwi club. XJ..... Only $38-00


Come on bobby.... you know that aint gunna happen


You're NOT going to make a him a goat-fkn JEEP lover, are you?
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: 27th - 28th, Xmas over and done with.

Post by xj »

well, i do have a spare.... hmmmmm
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by safaripete »

fj40 wrote:
safaripete wrote:finally done a well over due oil change on safari

about time 10liters of oil was it :lol: :lol:


haha yeah about that didnt change the filters tho dam things were way too tight to get undoe by hand so will need to go buy a filter strap 2mrw
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: 27th - 28th, Xmas over and done with.

Post by SV1K »

safaripete wrote:filters tho dam things were way too tight to get undoe by hand so will need to go buy a filter strap 2mrw


Pete, you doing the trip tomorrow? If so I can bring the filter spanner I have and you can borrow it to losen them up.. let me know...

8)
basics
Hard Yaka
Posts: 1511
Joined: Fri May 11, 2007 12:00 pm
Location: Wellington

Re: 27th - 28th, Xmas over and done with.

Post by basics »

replaced power steering belt, break shoes,a few other bits and cleaned about 5 ton of mud off the bottom of the hilux
99 pajero exceed 3.2
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: 27th - 28th, Xmas over and done with.

Post by MNC »

safaripete wrote:haha yeah about that didnt change the filters tho dam things were way too tight to get undoe by hand so will need to go buy a filter strap 2mrw


Just ram a bit of steel through the filter - tie some rope to one end - feed it through the grill and pull that sucker...

Had to do this on my old safari... took me and my 120Kg mate to turn the B@st@rd... Thats over 200Kgs of pulling power to turn a filter that someone hadn't greased before :evil:
Image
User avatar
gimmemud
Hard Yaka
Posts: 1043
Joined: Tue Oct 24, 2006 12:00 pm
Location: North Auckland

Re: 27th - 28th, Xmas over and done with.

Post by gimmemud »

safaripete wrote:
fj40 wrote:
safaripete wrote:finally done a well over due oil change on safari

about time 10liters of oil was it :lol: :lol:


haha yeah about that didnt change the filters tho dam things were way too tight to get undoe by hand so will need to go buy a filter strap 2mrw


Or flag the filter strap and just buy a toyota :lol: :lol:
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by safaripete »

MNC wrote:
safaripete wrote:haha yeah about that didnt change the filters tho dam things were way too tight to get undoe by hand so will need to go buy a filter strap 2mrw


Just ram a bit of steel through the filter - tie some rope to one end - feed it through the grill and pull that sucker...

Had to do this on my old safari... took me and my 120Kg mate to turn the B@st@rd... Thats over 200Kgs of pulling power to turn a filter that someone hadn't greased before :evil:


ive had them off before tho when i did starter motor

i didnt think they would tighten up like they have tho

oh well good excuse to to the "boy" shops as my missus calls them hahaha :evil:
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by safaripete »

suzuki1k wrote:
safaripete wrote:filters tho dam things were way too tight to get undoe by hand so will need to go buy a filter strap 2mrw


Pete, you doing the trip tomorrow? If so I can bring the filter spanner I have and you can borrow it to losen them up.. let me know...

8)


cheers for tha offer dude really need to get one for myself so perfect excuse to go spend sum money
mite come down for a play for a little while if i can get wof sorted dam cops stopped me with no reg or wof :x
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: 27th - 28th, Xmas over and done with.

Post by MNC »

safaripete wrote:... cheers for tha offer dude really need to get one for myself so perfect excuse to go spend sum money
mite come down for a play for a little while if i can get wof sorted dam cops stopped me with no reg or wof :x


Make sure you get one big enough to fit over a Safari filter too. We had a couple that were too small for the Safa filters :shock:

Can also just ram a big screw driver through the filter which should do the job (bit messy that what though :roll: )

10ltrs of oil and 2 oil filters on my old truck and oil went black after first trip every time :shock: Have seen the light now though :wink:
Image
User avatar
radar21
Hard Yaka
Posts: 443
Joined: Fri Nov 02, 2007 12:00 pm
Location: chch

Re: 27th - 28th, Xmas over and done with.

Post by radar21 »

well serviced my surf today and changed diff oils checked wheel bearings no trouble getting filter off but realised that crank seal and rear main seal are leaking heavly :x :x :x so now i have to fix more s##t on my pos and buy the missis a car to otherwise im gona lose my pos not that that would be that bad right now lol :lol:
scott gibson

1982 SJ410Q datsun a15 engine and disc brakes 31/10.50/15 mt snorkel cert 50mm shakels
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by safaripete »

well after meeting a few of the welly crew and having an under bonnet excursion decided to flag going out today and went and got new air filter :oops: gooed up my snorkel :oops: and clamped battery down properyly :oops: had fun meeting yas all woulda done some of those holes but that was first time taking saf out after body swap so was takin it easy :mrgreen:

taz im keen for this firewood loop sometime
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: 27th - 28th, Xmas over and done with.

Post by taz01 »

safaripete wrote:well after meeting a few of the welly crew and having an under bonnet excursion decided to flag going out today and went and got new air filter :oops: gooed up my snorkel :oops: and clamped battery down properyly :oops: had fun meeting yas all woulda done some of those holes but that was first time taking saf out after body swap so was takin it easy :mrgreen:

taz im keen for this firewood loop sometime

have a look here dude.......viewtopic.php?f=9&t=14356#p162131
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
Moriarty
Hard Yaka
Posts: 1205
Joined: Wed May 31, 2006 12:00 pm
Location: The newly formed Nation of OKATO

Re: 27th - 28th, Xmas over and done with.

Post by Moriarty »

Found that Holden Jackaroo, Isuzu Bighorn and other Isuzus) and SSingssungssongssang Korandos all use the same front wheel bearing kits.
How fkn fascinating is THAT?
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

Re: 27th - 28th, Xmas over and done with.

Post by meece4x4 »

Moriarty wrote:Found that Holden Jackaroo, Isuzu Bighorn and other Isuzus) and SSingssungssongssang Korandos all use the same front wheel bearing kits.
How fkn fascinating is THAT?



Image


fascinating Captain! :lol: :lol:
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
User avatar
madaz068
Hard Yaka
Posts: 994
Joined: Tue May 30, 2006 12:00 pm
Location: Taranaki
Contact:

Re: 27th - 28th, Xmas over and done with.

Post by madaz068 »

meece4x4 wrote:
Moriarty wrote:Found that Holden Jackaroo, Isuzu Bighorn and other Isuzus) and SSingssungssongssang Korandos all use the same front wheel bearing kits.
How fkn fascinating is THAT?



Image


fascinating Captain! :lol: :lol:

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
User avatar
mercutio
Hard Yaka
Posts: 1955
Joined: Tue Jul 08, 2003 12:00 pm
Location: Wellytown

Re: 27th - 28th, Xmas over and done with.

Post by mercutio »

been tinkering on the g and got it running finally and it does sound good even moved it under it's own power even if it was only a metre :mrgreen: :mrgreen: :mrgreen:
my 4wd is not a truck

old mercedes never die but sometimes they do need some love

older cars are good,mercedes are better,older mercedes are the best
User avatar
Heath
Hard Yaka
Posts: 3297
Joined: Thu Dec 12, 2002 12:00 pm
Location: Rolleston, Chch

Re: 27th - 28th, Xmas over and done with.

Post by Heath »

Took out the wiring loom from the zuk. Stripped it back to about 1/3rd of its wires and will reinstall it tomorrow when it stops raining. Also removed the fuse box and put in a 4 slot fuse box, didn't need all the rest as most of the stuff from it was gone. Just got to find a click clack type box and remount the ecu and relays in that and the fuses on the side. it will then be mounted as high up under the dash as I can get it with access through where the centre console (heater radio etc( was. then its just a few gauges to see what need to be seen, some switches for ignition etc and a little bit of cable for the battery to sort (gotta see a sparky about crimping the cables), oh yeah and mount the battery box when i decide where it is going. Might just leave it "floating" in the rear until I source a fuel cell and mount them side by side.
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 27th - 28th, Xmas over and done with.

Post by safaripete »

failed wof today

need to replace rf wheel bearing
rr seatbelt damit
and put flares backon
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 27th - 28th, Xmas over and done with.

Post by wopass »

mercutio wrote:been tinkering on the g and got it running finally and it does sound good even moved it under it's own power even if it was only a metre :mrgreen: :mrgreen: :mrgreen:


good news mate!!!

ive been pottering along with my repairs on the 40...going ok i think considering i only started it 2 weeks ago :lol: :lol:

8)
If you already know everything, DON'T ask bloody questions!!
Post Reply

Return to “This weekends achievements”