Terrano Starter
-
- Bush Crasher
- Posts: 74
- Joined: Thu Jan 17, 2008 12:03 pm
- Location: Dongara, Western Australia
Terrano Starter
Any tips on changing the starter motor on a 1990 TD27t?
Re: Terrano Starter
Pay someone else to do it
Sorry I know its no help but I could not resist -
Seriously though ...
I have done starters on a number of vehicles and the younger they are the harder they are to get to ...
Oh and remember to lift the Pos terminal off the battery before you start ... Its cheaper and safer (no I haven't done it)



Seriously though ...
I have done starters on a number of vehicles and the younger they are the harder they are to get to ...
Oh and remember to lift the Pos terminal off the battery before you start ... Its cheaper and safer (no I haven't done it)
There is no mechanical problem so difficult that it cannot be solved by brute strength and ignorance.
Re: Terrano Starter
Realy long extension and flexi joint threaded through the inlet manifold is about the only way to get the top bolt. Its easyish if your extension is long enough. Joining a couple of short ones makes it a bit harder, room is at a premium.
Bottom bolt from underneith. Good luck expect skined knuckles
Bottom bolt from underneith. Good luck expect skined knuckles
Toy - Zuk chassis tub, hilux 4.88 axles and transfer, Nissan CA18DE motor and auto trans, sc12 supercharger, 32 10'5 simex, twin motor 8274 custom freespool. Well the parts are all there in various corners of the shed
-
- Bush Crasher
- Posts: 74
- Joined: Thu Jan 17, 2008 12:03 pm
- Location: Dongara, Western Australia
Re: Terrano Starter
Did the job today while the inlet manifold was off fixing the leak in the injector pump. [Piece of Piss.]