series 3 Landozer

[landie]

Hi guys,I thought I'll put some pics of our landrover on here.
Its a series 3 1974,Picked it up for $500 bucks.All the running gear is good,standard motor.The brakes were shit when we got it so put new shoes and wheel cylinders in.


Then found out the master cylinder was rooted.(A big thanks to MIKE for offering one of his spare ones)But being a half cast Jew We figured out that a mitsubishi mirage one fitted on.We just had to change the flare nuts to metric.I Modified the front to be able to mount the winch(over engineered it)so it wont budge when the winch is in action.


We took it out yesterday to ashurst (manawatu river)Got stuck once but had installed a winch on the Landrover which pulled us out.



Hit a big hole And the front leaf spring snapped at the mount which in turn dropped down so we could'nt steer to the right because the steering arm was hitting it so a bit or Kiwi knowhow we jacked it up rammed a big spanner in there and wedged a bit of wood between the diff and bump stop to get the height we needed to clear the steering arm

So if anyone has got any leafsprings they want get rid of give me a buzz. Thanks

[landie]

took 11 months to fix leaf spring also built roll bar.
took it out to ashurst .

stuck

stuck

stuck

winch got us out of the shit a bit, keep getting stuck on the diffs

[KiwiBacon]

Then found out the master cylinder was rooted.(A big thanks to MIKE for offering one of his spare ones)But being a half cast Jew We figured out that a mitsubishi mirage one fitted on.We just had to change the flare nuts to metric.

That's amazing, got pics?

[landie]

[KiwiBacon]

So not a replacement for those without hole-saws then.

[landie]

So not a replacement for those without hole-saws then.

HaHa-Yep using the a 4inch holesaw worked a treat ,as its only a shitter it didnt matter,but you can use a 88-92 ish L300 master cylinder,these bolt on the same but the fluid resevoir is on flexibe hoses so you could mount it out of way(no holesaw)

[gary_in_nz]

So not a replacement for those without hole-saws then.

HaHa-Yep using the a 4inch holesaw worked a treat ,as its only a shitter it didnt matter,but you can use a 88-92 ish L300 master cylinder,these bolt on the same but the fluid resevoir is on flexibe hoses so you could mount it out of way(no holesaw)

damn and i thought i was a ruff fulla

[landie]

now up for sale
http://www.trademe.co.nz/Trade-Me-Motor ... 025061.htm
enjoy

[Loonez]

Hi,

i was just wonderin that vacuum booster that u have on that landy, ... was that off the mirage aswell ??

i'm after a upgrade unit for my landy but want one where i dont have to mod anything too much or not mod'ing would be perfect

Cheers Dave

[landie]

Hi Dave.The booster is the factory s3 item,it was just the mastercylinder that was changed.
I have a spare booster you can have if you want it,I got it off trademe a while ago .
cheers lyndon

[Loonez]

thanks lyndon,

yup i'm keen on the booster mate just let me know a price for it & postage included to whangarei

Cheers Dave