wrecking surfs

Selling, info, or parts wanted. Anything about parts goes in here.
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

wrecking surfs

Post by muddyhilux »

have just wrecked a 89 ln130 surf in grey and am about to wreck another 130 in red,both motors gone,but have both r150f boxes,1 i driven other i didnt,if anyone is looking for anything just ask and let me kno what ya willing to pay,may offer it to ya for less,ya neva kno and ill get things sorted,1s got g285s and the other i think is g282s
1990 surf 350 chevy jacked up and currently under construction again
User avatar
Engineer
Hard Yaka
Posts: 550
Joined: Wed Mar 29, 2006 12:00 pm
Location: Invercargill

Re: wrecking surfs

Post by Engineer »

i need an ash tray, i dont smoke but i run my one over... it blew to pieces :lol: :oops:

also need the lower compartment of the dash just below the ash tray, its the lower part of the dash that kinda meets the center console by gear shifter..i run that over to it didnt break but it twisted all funky :lol: :oops:

both in darkish grey.

how muchy?? and got a pic of each so i can make sure theyre right please

Ryan :mrgreen:
LN130 Surf: Coiled SAS, 35" BFG M/T's, Lifted, Rear Lockright, Snorkel, CB, On-board air
Soon to be 3.8 commy powered, front ARB Air Locker, custom bar work, winch...
rockyman
Hard Yaka
Posts: 110
Joined: Thu May 08, 2008 1:09 pm
Location: Ashburton

Re: wrecking surfs

Post by rockyman »

hi there just wondering if any of them have a bullbar?
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

mi mate,yip should definitly have those,will get pics tomorrow arvo and post them up,and driving over them :lol: nice accomplishment,atleast theyre no big items,ive driven over one or two expensive things aswell
1990 surf 350 chevy jacked up and currently under construction again
User avatar
Engineer
Hard Yaka
Posts: 550
Joined: Wed Mar 29, 2006 12:00 pm
Location: Invercargill

Re: wrecking surfs

Post by Engineer »

haha yea thanks!! i took them out to run wires for cb and dumped them bside the tire n forgot bout them..i remembered pretty quick when i heard the smash :lol:


Cheers ryan.
LN130 Surf: Coiled SAS, 35" BFG M/T's, Lifted, Rear Lockright, Snorkel, CB, On-board air
Soon to be 3.8 commy powered, front ARB Air Locker, custom bar work, winch...
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

hi rockyman,bullbar,no,nudge bar type thing with light spots and bits up round lights,will get photo up tomorrow
1990 surf 350 chevy jacked up and currently under construction again
User avatar
DJ
Hard Yaka
Posts: 700
Joined: Tue Feb 10, 2004 12:00 pm
Location: Ngongotaha

Re: wrecking surfs

Post by DJ »

Hi
can you do a left and right front doors and 2 front guards
cheers
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

can do both guards and pos two front doors,have them but 2 are red 2 grey but cant memba which 2 were rusted out,will send ya pm 2nite mate
1990 surf 350 chevy jacked up and currently under construction again
User avatar
DJ
Hard Yaka
Posts: 700
Joined: Tue Feb 10, 2004 12:00 pm
Location: Ngongotaha

Re: wrecking surfs

Post by DJ »

Hi
rust is not a problem to much so long as they are reasonably straight they will be resprayed so colour is not and issue These are replacements for my surf which will never see another WOF. I have a habit of bending doors in half ask Al and Gimmemud.. :lol:
cheers
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

hi guys,sori but im having trouble with pics,photobucket wont let my comp upload anything but im still trying,have ash tray and gey panel,def have guards and couple doors to choose from,ill try again tonight after iv been to the docs to get photos and more info up
1990 surf 350 chevy jacked up and currently under construction again
User avatar
Engineer
Hard Yaka
Posts: 550
Joined: Wed Mar 29, 2006 12:00 pm
Location: Invercargill

Re: wrecking surfs

Post by Engineer »

muddyhilux wrote:hi guys,sori but im having trouble with pics,photobucket wont let my comp upload anything but im still trying,have ash tray and gey panel,def have guards and couple doors to choose from,ill try again tonight after iv been to the docs to get photos and more info up

i have that problem too dont know what the issue is but you can email photobucket the photos and it works perfectly
LN130 Surf: Coiled SAS, 35" BFG M/T's, Lifted, Rear Lockright, Snorkel, CB, On-board air
Soon to be 3.8 commy powered, front ARB Air Locker, custom bar work, winch...
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

oh awsum,ill get onto it when i get home from work today
1990 surf 350 chevy jacked up and currently under construction again
User avatar
J_Dub
Hard Yaka
Posts: 1673
Joined: Fri Oct 24, 2008 10:02 am
Location: Pukekohe

Re: wrecking surfs

Post by J_Dub »

ive got recaros sitting in my shed that i wana fit to my surf, have you any seat rails that are detachable from the seats, as my surf rails are all one piece with the seat, ide have to cut out the rails then weld to the recaros???
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

sori guys thngs aint been goin well latly and just aint got things done,ill get photos done tho asap,um j_dub dont think i will sori as all the surfs iv wrecked have standard seats which will be the same as what uv got,think my mate just went to local pick apart and managed to find sumthing when he was doin his seats
1990 surf 350 chevy jacked up and currently under construction again
vvega
Hard Yaka
Posts: 972
Joined: Thu Jan 08, 2009 2:02 pm
Location: hamilton

Re: wrecking surfs

Post by vvega »

dashboard steering colem and center console ? .obvioulys missing the ashtray :)
Kiwi4x4
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

ok engineer,do kno what part ur after but dont have it,must have been damaged,do have ashtray tho but forgot to take photo,but yeh thats grey

heres a pic of the rhs door dj,not rust or damage exteriorly,straight,both have no door cards,handles,switches or wiring ,just shell with glass and winder with motors,below that are the 2 guards i have,rhs has litle indicator,lhs doesnt,both good strait nick,doors and guards already listed oon trade me,2 auctions,150 guards 150 doors,am happy to sell direct to u after auction has finished if u wana go that way
Image
Image
Image

and for vvega,asume u mean cluster suround,cluster etc,pics below of what i have,do have piece that goes round sterio but a bit ruff around edge of sterio area as sum1 has played with it,apart from that its ok,if ur interested i can put up photo of that aswell,also have glove box but no other dash parts available in grey,if u dont mind red parts vvega then ive got a complete dash centre consol etc,oh do u mean steering colum as in wheel etc?if so can help with that to
Image
Image
Image



and in general the motor of the red surf is nw back up for grabs,2.4 turbo diesel,good condition,very litle smoke,drives really well,good power etc,has r150 manual box on it also in good nick,can be driven if within next week then trucks being striped so will just have to take my word,$1000 firm for both motor and box
Last edited by muddyhilux on Tue Jan 27, 2009 11:59 am, edited 1 time in total.
1990 surf 350 chevy jacked up and currently under construction again
User avatar
Engineer
Hard Yaka
Posts: 550
Joined: Wed Mar 29, 2006 12:00 pm
Location: Invercargill

Re: wrecking surfs

Post by Engineer »

how much for ashtray?
LN130 Surf: Coiled SAS, 35" BFG M/T's, Lifted, Rear Lockright, Snorkel, CB, On-board air
Soon to be 3.8 commy powered, front ARB Air Locker, custom bar work, winch...
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

$5bucks,and id say maybe $5bucks to send to invercargill,$10 all up,if ya kn pm me and ill send bank details threw
1990 surf 350 chevy jacked up and currently under construction again
User avatar
Smurf
Hard Yaka
Posts: 2867
Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson

Re: wrecking surfs

Post by Smurf »

How about a set of door key locks and the key lock from the rear door, and ignition barrel and a key so i can have a matching set of locks and only one key to open all.
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

:lol: i kno how u feel smurf,iv had that in the past,yes,can do that,key is in resonable nic for age obviously but yeh have doors and tailgate plus ignition off the red truck,im pretty sure the locks themselves are in good nick aswell but ill check for u before i confirm,i just rang wrecker and he wants $220 for a set :lol: :lol: im rolling on the floor :lol: but what u think theyre worth to you,im not going charge you that much thats for sure
1990 surf 350 chevy jacked up and currently under construction again
User avatar
madmule
Driver/Navigator
Posts: 35
Joined: Thu Jul 12, 2007 12:00 pm
Location: Chrisrchurch

Re: wrecking surfs

Post by madmule »

are u selling diffs and cv's if u are what ratio are they
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

hi madmule,yes i am,have a 4.3lsd with rear axle drum to dum,this unit has damage to the braked and 1 side doesnt even have a drum on it but axles are good in it,also have a 4.3 open rear diff head,no 2nd axle housing tho,thats been used already and also have both front ifs diff heads for sale,can confirm any of these ratios yet tho as havent pull heads,this is going just off the id cards
1990 surf 350 chevy jacked up and currently under construction again
User avatar
T-Boon
Hard Yaka
Posts: 887
Joined: Mon Dec 22, 2008 10:59 am
Location: Auckland

Re: wrecking surfs

Post by T-Boon »

Elec windows or manual ?

bullbar ?

stock suspension ?

What rims and tyres ?

Cheers
Dan
To Boon or not to Boon.
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

hi dan

electric,no bullbar,yes stock suspension,wheels are alloys with 31x10.5 firestone muds,offset is quite nice to ,wheels stick out sligtly for beter foot print,idealy ud need rubber edging or stock fiberglass guards to cover,wanting 350 for wheels etc as 2 tyres are still good,2 are wofable
Image

regarding ur other post id go and have done 2" old man emu kit but some say they no good,ive had nothing but a good truck,tows great,no issues off road,only thing to think bout is will u go higher later as these kit arent any god if u do,u just hav to pull them out and sell on but yeh my 2c
1990 surf 350 chevy jacked up and currently under construction again
User avatar
T-Boon
Hard Yaka
Posts: 887
Joined: Mon Dec 22, 2008 10:59 am
Location: Auckland

Re: wrecking surfs

Post by T-Boon »

yeah, i`m looking into the Old Man Emu stuff, if for nothing else but ease in sourcing.
But brand new I dont think i'll have any problems.

I think i`ll just get some steel rims, gonna get new 33 in tires anyway.
cheers anyway.
To Boon or not to Boon.
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

all good mate,check out ma truck build thread if ya want,bita info in there,can also make up parts for ya if need be,i sell a few things here and there to some of the guys

http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=18&t=7966
1990 surf 350 chevy jacked up and currently under construction again
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

BUMP now have motor back up for sale,still have doors fenders and fair bit more,anyone need anything?
1990 surf 350 chevy jacked up and currently under construction again
User avatar
tintin
Hard Yaka
Posts: 379
Joined: Mon Jul 09, 2007 12:00 pm
Location: Te Aroha

Re: wrecking surfs

Post by tintin »

muddyhilux wrote:BUMP now have motor back up for sale,still have doors fenders and fair bit more,anyone need anything?

do you have a chassis that can be cut up?
1980 4x4 Hilux Restoration Image
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: wrecking surfs

Post by muddyhilux »

well yeh,still have full chasis as just started stripping,what are u after xactly?
1990 surf 350 chevy jacked up and currently under construction again
User avatar
tintin
Hard Yaka
Posts: 379
Joined: Mon Jul 09, 2007 12:00 pm
Location: Te Aroha

Re: wrecking surfs

Post by tintin »

rear cross member
and the pipe cross member with the fuel tank bracket on it
1980 4x4 Hilux Restoration Image
Post Reply

Return to “4WD Parts”