MK/MQ Rebuild......

Starting a project or modification? Then post it's progress here and show us some pic's.
Post Reply
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: MK/MQ Rebuild......

Post by SV1K »

Jerry wrote:shhhhh I'm sure he has a plan for this POS
Image


Jerry, stop posting photo's of your place on the net.... :lol: :lol: :lol: :lol:
8)
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: MK/MQ Rebuild......

Post by skid »

suzuki1k wrote:
Jerry wrote:shhhhh I'm sure he has a plan for this POS
Image


Jerry, stop posting photo's of your place on the net.... :lol: :lol: :lol: :lol:
8)


thats not his place, theres a girl in that pic
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
WACKO
Pyro
Posts: 990
Joined: Sat Feb 11, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by WACKO »

skid wrote:
suzuki1k wrote:
Jerry wrote:shhhhh I'm sure he has a plan for this POS
Image


Jerry, stop posting photo's of your place on the net.... :lol: :lol: :lol: :lol:
8)


thats not his place, theres a girl in that pic


she was making a run for it....
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

Taz did you get the glass work done dude...?????? or is it going to be race tape :lol: :shock: abbo
Don't have 4wd.
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: MK/MQ Rebuild......

Post by turoa »

Can I just ask what exactly the point of chopping the back off was?
User avatar
stinky
House Hubby
Posts: 949
Joined: Wed Nov 30, 2005 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by stinky »

Dont think he knows but one things forsure hes not getting anywhere near my little soft roader with a grinder
____________________________
Martin
http://www.wtbs.co.nz
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: MK/MQ Rebuild......

Post by wgtnnewbie »

stinky wrote:Dont think he knows but one things forsure hes not getting anywhere near my little soft roader with a grinder


oh don't ya want a soil seive/barbeque on the back....... :lol: :lol: :lol:
truckless and shall remain so till she who wears the pants says otherwise.................lol
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

turoa wrote:Can I just ask what exactly the point of chopping the back off was?


asks a man who chops everything ...............got sick of denting and catching the arse on banks so eliminate the problem...
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
Bolo
2XL
Posts: 697
Joined: Mon Mar 31, 2008 8:00 pm
Location: Welly

Re: MK/MQ Rebuild......

Post by Bolo »

thats looking very different taz , but nice work , cant wait to see ti in action 8)
Your name is Bolo and it will stay that way until you have earnt the right to be called your real name........................ Bolo
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

Ha bud hows this going now that you have taken the bbq off the back.....???????????? It has been working well............ :D Cheers abbo :mrgreen:
Don't have 4wd.
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

yep had a little slip with the power hacksaw bbq is off but going back on cab been shortened just working out the radiator pipes,body lift,reversal of front springs, with do pics when more progress is done
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: MK/MQ Rebuild......

Post by coxsy »

taz mate how can the cab get shorter
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

taz01 wrote:yep had a little slip with the power hacksaw bbq is off but going back on cab been shortened just working out the radiator pipes,body lift,reversal of front springs, with do pics when more progress is done

Reversal of springs that sounds interesting.......... 8) Is truck at work ......... will come and have alook..... :wink:
Don't have 4wd.
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

coxsy wrote:taz mate how can the cab get shorter

oh it can and did going for the ute look...........
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: MK/MQ Rebuild......

Post by turoa »

bigger bbq?
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: MK/MQ Rebuild......

Post by Sadam_Husain »

turoa wrote:bigger bbq?


Nope watch this space..... tyre changing machine :mrgreen: :mrgreen:
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

well the boss (stinky) rocks in on tuesday and goes come on lets see what ya pos looks like lifted.......so up she went in slip the blocks i made the day before and.............ummmmmmm.............yeah.............4 inch body lift is bloody high isnt it sorta clears the chassis so have to rethink things a bit now.................pics to come
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: MK/MQ Rebuild......

Post by wgtnnewbie »

taz01 wrote:well the boss (stinky) rocks in on tuesday and goes come on lets see what ya pos looks like lifted.......so up she went in slip the blocks i made the day before and.............ummmmmmm.............yeah.............4 inch body lift is bloody high isnt it sorta clears the chassis so have to rethink things a bit now.................pics to come


ah so it's all the bosses fault................................................ :lol: :lol: :lol:

and how the hell are we supposed to cook anything on the bbq tray with it that high........... :twisted: :twisted: :lol: :lol:
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: MK/MQ Rebuild......

Post by skid »

wgtnnewbie wrote:
taz01 wrote:well the boss (stinky) rocks in on tuesday and goes come on lets see what ya pos looks like lifted.......so up she went in slip the blocks i made the day before and.............ummmmmmm.............yeah.............4 inch body lift is bloody high isnt it sorta clears the chassis so have to rethink things a bit now.................pics to come


ah so it's all the bosses fault................................................ :lol: :lol: :lol:

and how the hell are we supposed to cook anything on the bbq tray with it that high........... :twisted: :twisted: :lol: :lol:



the only you are allowed to cook is vegan patties pal
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

skid wrote:
wgtnnewbie wrote:
taz01 wrote:well the boss (stinky) rocks in on tuesday and goes come on lets see what ya pos looks like lifted.......so up she went in slip the blocks i made the day before and.............ummmmmmm.............yeah.............4 inch body lift is bloody high isnt it sorta clears the chassis so have to rethink things a bit now.................pics to come


ah so it's all the bosses fault................................................ :lol: :lol: :lol:

and how the hell are we supposed to cook anything on the bbq tray with it that high........... :twisted: :twisted: :lol: :lol:



the only you are allowed to cook is vegan patties pal

:lol: :lol: :lol: :lol: :lol: :lol: YER YOU TELL HIM SKID...... :shock: :mrgreen:
Don't have 4wd.
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: MK/MQ Rebuild......

Post by wgtnnewbie »

skid wrote:
wgtnnewbie wrote:
taz01 wrote:well the boss (stinky) rocks in on tuesday and goes come on lets see what ya pos looks like lifted.......so up she went in slip the blocks i made the day before and.............ummmmmmm.............yeah.............4 inch body lift is bloody high isnt it sorta clears the chassis so have to rethink things a bit now.................pics to come


ah so it's all the bosses fault................................................ :lol: :lol: :lol:

and how the hell are we supposed to cook anything on the bbq tray with it that high........... :twisted: :twisted: :lol: :lol:



the only you are allowed to cook is vegan patties pal


hmmmmmmmmmmm falafels yummy
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

So how is the project going bud..... :?: You added ten ton of steel to the out side yet... :twisted: And as they say this tread is no good without photos....... :wink: abbo :mrgreen:
Don't have 4wd.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: MK/MQ Rebuild......

Post by Jerry »

Called into the Taz Cave for a look today :D :D :D :D
Image
Image
Image
Image
Image
Image
Image
Image
Image
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: MK/MQ Rebuild......

Post by coxsy »

bloody hell. :D taz thats a lift and a half :D
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

yep 100mm note the gearstick disappeared through the floor :shock: :shock:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: MK/MQ Rebuild......

Post by coxsy »

ya going to add more steel to the body mounts they take a pounding that high
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: MK/MQ Rebuild......

Post by Jerry »

and maybe a ladder :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

coxsy wrote:ya going to add more steel to the body mounts they take a pounding that high

nah they gotta be the most solid mounts ive seen and not alot of weight left in the cab ..........will do new rubber mounts though
Jerry wrote:and maybe a ladder :lol:

and if jerry wants in bring ya own bloody ladder........... :lol: :lol:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Re: MK/MQ Rebuild......

Post by turoa »

the banjos must play hard down in vivian street
User avatar
stinky
House Hubby
Posts: 949
Joined: Wed Nov 30, 2005 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by stinky »

i think hes suffering from sms 8)
____________________________
Martin
http://www.wtbs.co.nz
Post Reply

Return to “Projects / Mod's”