1uz gearbox options

For all Toyota related topics ie. Hilux, Cruiser topics
vvega
Hard Yaka
Posts: 972
Joined: Thu Jan 08, 2009 2:02 pm
Location: hamilton

Re: 1uz gearbox options

Post by vvega »

Bulletproof wrote:
vvega wrote:are 4.3's stronger again ?


4.5s are 9 teeth on the pinion and 41 on the crown
4.3s are 9 teeth on the pinion and 39 on the crown so the teeth on the crown are bigger making them stronger.
I think that is right from memory

Cheers Richard

just wanting to correct myself here
i have a 39/9 4.1 here right now
i had a 41/10 last week

is it posible ones aftermarket ?
Kiwi4x4
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 1uz gearbox options

Post by wopass »

vvega wrote:
Bulletproof wrote:
vvega wrote:are 4.3's stronger again ?


4.5s are 9 teeth on the pinion and 41 on the crown
4.3s are 9 teeth on the pinion and 39 on the crown so the teeth on the crown are bigger making them stronger.
I think that is right from memory

Cheers Richard

just wanting to correct myself here
i have a 39/9 4.1 here right now
i had a 41/10 last week

is it posible ones aftermarket ?


from what ive seen the later model 4.1-1's are 41/10 and the older ones are 39/9's...thats with the bigger cruiser diffs anyway, probably the same for the smaller lux ones?
If you already know everything, DON'T ask bloody questions!!
User avatar
blulux
Driver/Navigator
Posts: 20
Joined: Sat Jan 10, 2009 8:02 pm

Re: 1uz gearbox options

Post by blulux »

Hi jeremy

i have put a r150f in my ln106 im in the middle of wiring it up i can give you hand doing yours if you want?

scott
0211203155
1991 Hilux ,solid front axle ,3.0 2jzge,crane
User avatar
j_tomo
Hard Yaka
Posts: 145
Joined: Tue Jan 06, 2009 5:10 pm

Re: 1uz gearbox options

Post by j_tomo »

hey scott
are you doing the 1uz swap aswell?
ive got to make custom cross member and drive shafts as the box will be mounted 50mm higher and 40mm forward
ive decided on the R box
think ive got my loom sorted


well ive learnt a bit about hilux boxes over the last mont i had a ln61surf for 3years an though a hilux box was a hilux box (w58's) :oops:

thanks
jeremy
User avatar
blulux
Driver/Navigator
Posts: 20
Joined: Sat Jan 10, 2009 8:02 pm

Re: 1uz gearbox options

Post by blulux »

hello

no, im doing a 2jz ge swap with r1501f , i just made a little mod on factory x member

sweet about the loom

scott
1991 Hilux ,solid front axle ,3.0 2jzge,crane
User avatar
j_tomo
Hard Yaka
Posts: 145
Joined: Tue Jan 06, 2009 5:10 pm

Re: 1uz gearbox options

Post by j_tomo »

ok im thinking ill use a toggle switch for 4wd 2wd,
allmost had the lexus running tonite
i think the injectors are gumbed up, ive heard of it before on lextreeme
got spark power at the injectors (didnt want to back probe the ecu incase i fried it, i figer if its sparking the ecu's working)
also if i put 12v to the cold start injector i get 2 or 3 clicks then its like an open circuit

bar sending them away whats the best way of cleaning injectors?
run a fuel pump in a 5L container with straight injector clean???
thanks
Post Reply

Return to “Toyota”