so what are the plans for the long weekend QBirthday 2006

Post what you achieved in the weekend.
Include the date of the weekend eg 25/02/2006
Thanks to Turoa for a great forum idea!
Post Reply
User avatar
mercutio
Hard Yaka
Posts: 1955
Joined: Tue Jul 08, 2003 12:00 pm
Location: Wellytown

so what are the plans for the long weekend QBirthday 2006

Post by mercutio »

any expeditions or modifications you are planning to do

me i'm going to cruise down to my parents place and put the turbo on my wagon hopefully give it a little more power which it desperately needs i might take my muddies with me incase i have enough time to go play on monday

i would have done it earlier but i figure if i allow 3 days to make all the little brackets and things it is better not so much stress so things should get done properly especially as i use it as my runabout
User avatar
red-devil
Hard Yaka
Posts: 987
Joined: Mon May 01, 2006 12:00 pm
Location: Christchurch
Contact:

Post by red-devil »

I'm heading towards Nelson for the weekend. Taking the truck with me if i get the new gearbox in this week.
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

will fix clutch pack on starter :roll: in truck mid week to insure readiness for a possible play at either the waimak or the ashley on monday... :twisted:
User avatar
lilpigzuk
Tiger Balm
Posts: 2316
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Post by lilpigzuk »

Mums 60th friday night so that will mean saturday is a right-off :wink:
Get a 307 chev engine running ready for sale - unless someone wants to make a reasonable offer and repower their toy?? (was running in a 1969 G60 Nissan Patrol , so still has 3 speed manual and transfer box with it 8) )
Make sure Lil Pig is running for a club comp the following weekend......
User avatar
Clint
Hard Yaka
Posts: 632
Joined: Tue Feb 17, 2004 12:00 pm
Location: Rotoiti (North Is)

Post by Clint »

Muddy Tracks

Big Tyres

V8 Power x 5

Beer

Pig on Spit

Need I say more?

Cheers
Clint
User avatar
U-BOAT
Hard Yaka
Posts: 130
Joined: Tue Dec 20, 2005 12:00 pm
Location: westport

weekend work

Post by U-BOAT »

I'm going to start on changing my timing belt, waterpump, idlers and crank seal, then might start on putting the locker into my rear diff with new bearings, seals bearings, shoes .......... do you see the picture forming?

u-Boat
User avatar
mike
Last minute Mike
Posts: 3545
Joined: Fri Dec 06, 2002 12:00 pm
Location: Christchurch - The place I'd like to be

Post by mike »

Will be meeting some more wellington members at some 4wd place for a bbq on sat and then work sun/mon

Mike
1973 SWB Land Rover V8 Hybrid
1994 Toyota Surf
ruf_zuki
Hard Yaka
Posts: 183
Joined: Mon Jan 23, 2006 12:00 pm
Location: Auckland
Contact:

Post by ruf_zuki »

putting some trellis up in the front yard on saturday then finishing off my new front bumper, sunday will be spent putting new wheel bearings/seals/swivel hub seals/bearing in the front of the surf and monday ill finish off passenger seat rail and put front window in...


hmmm lots of front in that.....
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Post by turoa »

aotea on sat then sun/mon to finish cage
User avatar
Cloggy_NZ
Texas Chainsaw
Posts: 663
Joined: Wed Aug 24, 2005 12:00 pm
Location: Wainuiomata

Post by Cloggy_NZ »

Hitting the road tomorrow just after midday for a quiet long weekend in and around Turangi. No 4 wheeling.
But if any of the Wellington guys haven't had enough playing yet over this long weekend and are keen on another trip the following weekend, I'd be keen as mustard as well.
Got a set of brand new muddies sitting in the garage waiting to be tried out :D
1992 Land Rover Discovery V8i, 5 speed, 12000lbs winch, Salisbury rear, 110 front, 65mm spring lift, dents in every panel, Rallywoods pinstriping.
Image
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

have completely cut rear guards out. mates comin round to measure, fabricate the rear wells of my 40 for the mini tub, brilliant! :twisted:

will take springs out and flip 180 degrees. except military pack of course..

:D :D
User avatar
pajeroboy
Hard Yaka
Posts: 195
Joined: Tue Nov 08, 2005 12:00 pm
Location: Christchurch

Post by pajeroboy »

heading into lake collridge with mates tomorrow just to have a looksee.as for rest of weekend no plans yet
33" muddies, 50mm body lift, ball joint flip, quick release front sway bar,40mm lifted rear dobi springs and new shocks,custom sill body armor,custom front bar.

SAM
User avatar
callum007
Hard Yaka
Posts: 1143
Joined: Tue May 30, 2006 12:00 pm
Location: Dunedin
Contact:

Post by callum007 »

work and airbagging the rear of the cruiser..

lilpug, where/what is the comp next weekend.. i didnt have plans, if its a free for all..
Post Reply

Return to “This weekends achievements”