Snokel

For all Suzuki related topics
Post Reply
Escudo boy
Hard Yaka
Posts: 165
Joined: Thu Feb 05, 2009 8:02 pm

Snokel

Post by Escudo boy »

Any one kno where i can get a safari snokel for my escudo
amateur
Driver/Navigator
Posts: 45
Joined: Thu May 22, 2008 3:47 pm
Location: Tauranga

Re: Snokel

Post by amateur »

where are you from? and they are fairly expensive.
User avatar
Swamped
Hard Yaka
Posts: 1264
Joined: Sun May 25, 2008 10:19 pm
Location: North Island

Re: Snokel

Post by Swamped »

steve at 4wd fibreglass might have some suzuki ones. They're safari copies so not too expensive. Or have some tube bent up for it.would work fine.
amateur
Driver/Navigator
Posts: 45
Joined: Thu May 22, 2008 3:47 pm
Location: Tauranga

Re: Snokel

Post by amateur »

i just bought a 2.5" coby bend exhaust tube its got heaps of bends and straight pipe and i only had to weld 1 seam and then bought a snorkel hat. far stronger than plastic ones as well.
Escudo boy
Hard Yaka
Posts: 165
Joined: Thu Feb 05, 2009 8:02 pm

Re: Snokel

Post by Escudo boy »

i in hamilton
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: Snokel

Post by skid »

Escudo boy wrote:i in hamilton



so is 4wd fiberglass

Swamped wrote:steve at 4wd fibreglass might have some suzuki ones. They're safari copies so not too expensive. Or have some tube bent up for it.would work fine.



best you shoot round and see him
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
lneil
Hard Yaka
Posts: 592
Joined: Fri Aug 17, 2007 12:00 pm
Location: Reefton

Re: Snokel

Post by lneil »

Safari aren't available for the 8-valves, but 16-valve no problem.'

Last one I had quoted was about $450, and most 4WD accessory outlets supply them.

If you have an 8-valve, then try 4WD accessories in CHCH for a steel 'outlaw' snorkel.
'89 3-Dr scud. 2" body lift, 2" suspension, Snorkel, 31x10.5's, Evil-daughter chose the paint-job.
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Snokel

Post by Sadam_Husain »

The Safari brand is sold by ARB agents, pretty pricey compared to other brands but I've seen a few smashed and broken snorkels and none of them have been Safari ones :mrgreen: :mrgreen:
Escudo boy
Hard Yaka
Posts: 165
Joined: Thu Feb 05, 2009 8:02 pm

Re: Snokel

Post by Escudo boy »

cool i check those out thanks, i have the 16 valve model
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

lol....."snokel"
phone Ross Bolus (secretary of the BOP club) He'll save you.
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: Snokel

Post by xj »

Escudo boy wrote:cool i check those out thanks, i have the 16 valve model


waikato 4x4 in Cambridge then if you want "safari"
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

you would have to sell a kidney to buy one from waikato 4x4
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
Swamped
Hard Yaka
Posts: 1264
Joined: Sun May 25, 2008 10:19 pm
Location: North Island

Re: Snokel

Post by Swamped »

Nah. 2 Kidneys and a lung. They real expensive there.its cheaper buying stuff online and shipping it.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

Swamped wrote:Nah. 2 Kidneys and a lung. They real expensive there.its cheaper buying stuff online and shipping it.


i've tried searching for snokels but cant find anything :-(
phone Ross Bolus (secretary of the BOP club) He'll save you.
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: Snokel

Post by xj »

flyingbrick wrote:you would have to sell a kidney to buy one from waikato 4x4


to put it in perspective..... for my TJ i was quoted $718.00 incl of GST from Auckland 4x4, got it for $550 incl of GST from Waikato 4x4..... who is doing lungs and kidneys?

Also, in the original post he asked for a Safari one. Where are you gunna fina a Safari one outside of a ARB agent?.... Considering hes in the Waikato, the next option is Tauranga Diesel.
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

$718 :shock:

Sounds like that guy with the little 4x4 shop down terapa. He sells 15x8" speedy steel rims for 150ish dollars...... like 50% more than 4wdbits. :lol: :lol: :lol: I asked if he'd price match and he kinda snapped at me.

-Nathan
phone Ross Bolus (secretary of the BOP club) He'll save you.
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: Snokel

Post by xj »

flyingbrick wrote:$718 :shock:

Sounds like that guy with the little 4x4 shop down terapa. He sells 15x8" speedy steel rims for 150ish dollars...... like 50% more than 4wdbits. :lol: :lol: :lol: I asked if he'd price match and he kinda snapped at me.

-Nathan


And I dont think it is there anymore.
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

xj wrote:
flyingbrick wrote:$718 :shock:

Sounds like that guy with the little 4x4 shop down terapa. He sells 15x8" speedy steel rims for 150ish dollars...... like 50% more than 4wdbits. :lol: :lol: :lol: I asked if he'd price match and he kinda snapped at me.

-Nathan


And I dont think it is there anymore.



It was there about 3 weeks ago.
phone Ross Bolus (secretary of the BOP club) He'll save you.
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Re: Snokel

Post by xj »

flyingbrick wrote:
xj wrote:
flyingbrick wrote:$718 :shock:

Sounds like that guy with the little 4x4 shop down terapa. He sells 15x8" speedy steel rims for 150ish dollars...... like 50% more than 4wdbits. :lol: :lol: :lol: I asked if he'd price match and he kinda snapped at me.

-Nathan


And I dont think it is there anymore.



It was there about 3 weeks ago.


Well it might be then. I heard he had shut and was operating out of home.
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

Asked for a quote on springs and shocks while i was there and he was like.. ummn, really want to go home now ( it was like 4.30 ) so he said he would e-mail me. I never heard back. :lol:

Is he the guy selling smart bars on tm?

-Nathan
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
Swamped
Hard Yaka
Posts: 1264
Joined: Sun May 25, 2008 10:19 pm
Location: North Island

Re: Snokel

Post by Swamped »

Tauranga diesel are better. We were after full 100mm suspension lift kits for 3 patrols and waikato 4x4 just fobbed us off. Wouldn't help us out at all. We all just got efs gear elswhere instead of ome. Guess they didn't need out business lol. Thats why the set of staun beadlocks i'm gonna get won't be from them. There are also safari snorkel copies floating about...4x4 fiberglass did sell them cheap as chips but don't know now. That te rapa 4x4 place is still there...he wanted 500 bux for two gq front springs!!!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

phone Ross Bolus (secretary of the BOP club) He'll save you.
Escudo boy
Hard Yaka
Posts: 165
Joined: Thu Feb 05, 2009 8:02 pm

Re: Snokel

Post by Escudo boy »

u do!!!!, wud u by it for me hahaha
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

Escudo boy wrote:u do!!!!, wud u by it for me hahaha


No ways.

My trucks getting a cheap ass tube snorkel.. yours can get the same :mrgreen: You could do it for like, $150. sfa really.

I even drew up the 90 degree pipe today in cad (ok.. I didn't.. tutor at tech did) and we worked out the shape of the hole that needs to exit the guard- and printed out a template. Works sweet!!! (its an egg shape)
phone Ross Bolus (secretary of the BOP club) He'll save you.
Escudo boy
Hard Yaka
Posts: 165
Joined: Thu Feb 05, 2009 8:02 pm

Re: Snokel

Post by Escudo boy »

eeeewww ugly, how are u suposed to show urself in auckland like that ahahahahahahaha :lol:
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

Escudo boy wrote:eeeewww ugly, how are u suposed to show urself in auckland like that ahahahahahahaha :lol:



i dunno.

But thats what i thought when i first saw your Escudo.

:lol: Just kidding.

point is- you probably wont be able to bring yourself to spend $400+ on commercially available snorkel.........so IMO you have 3 options. Tube snorkel, flexi pipe through guard into cabin (probably noisy as crap..but its a sweet idea.. saw it somewhere on these forums) or nothing...

and since your trucks little....and last time we went out we found water in your intake...................I'm going to suggest you do SOMETHING.
phone Ross Bolus (secretary of the BOP club) He'll save you.
gomulletgo
Hard Yaka
Posts: 320
Joined: Sat Aug 26, 2006 12:00 pm
Location: Amberley / North Canterbury

Re: Snokel

Post by gomulletgo »

flyingbrick: My trucks getting a cheap ass tube snorkel.. yours can get the same :mrgreen: You could do it for like, $150. sfa really.

I even drew up the 90 degree pipe today in cad (ok.. I didn't.. tutor at tech did) and we worked out the shape of the hole that needs to exit the guard- and printed out a template. Works sweet!!! (its an egg shape)


Could you please post up pictures of it when it is done? Thanks :)

amateur: i just bought a 2.5" coby bend exhaust tube its got heaps of bends and straight pipe and i only had to weld 1 seam and then bought a snorkel hat. far stronger than plastic ones as well.


Could you please post up pictures of this? Sounds very interesting. Thanks :)
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: Snokel

Post by flyingbrick »

you can flick through my build thread if you want to see the start of my ugly ass tube snorkel :-)
phone Ross Bolus (secretary of the BOP club) He'll save you.
Post Reply

Return to “Suzuki”