vg30 v6

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
User avatar
ALS4B
Bush Crasher
Posts: 65
Joined: Sun Dec 09, 2007 12:00 pm

vg30 v6

Post by ALS4B »

does anyone know of an auto that would bolt up to the bell housing of a terrano for a poject am building up
User avatar
Nick555
Bush Crasher
Posts: 87
Joined: Mon Dec 29, 2008 9:13 pm
Location: Christchurch
Contact:

Re: vg30 v6

Post by Nick555 »

I could be wrong here but for a vg30 i would be looking at an auto out of a 300zx i heard they were pretty strong
User avatar
Ryan
Hard Yaka
Posts: 1187
Joined: Thu Aug 03, 2006 12:00 pm
Location: kapiti

Re: vg30 v6

Post by Ryan »

an auto out of a V6 terrano???.......
94 nissan terrano 2inch susp lift, 3inch body lift, 33x12.5x15 maxxis bighorns
User avatar
ALS4B
Bush Crasher
Posts: 65
Joined: Sun Dec 09, 2007 12:00 pm

Re: vg30 v6

Post by ALS4B »

terraro trans out the wrong side for i am going to be doing. The thought was to use a hulux tranz
User avatar
darinz
Hard Yaka
Posts: 1265
Joined: Wed Nov 07, 2007 12:00 pm
Location: Whangarei

Re: vg30 v6

Post by darinz »

I'm guessing you mean the transfer case is the wrong side? If so then I'd look at maybe using a Patrol/Safari transfer case. I'm not sure if it does fit but worth looking at as the Safari is a stronger version of the Terrano trans so it all might bolt together and the front output is on the right hand side. (opposite a Terano)
FYI the 300zx vg30 auto is the same as a Terrano and the 300zx twin turbo auto is the same as a Safari.
Nissan Terrano coilovers, turboed VH45, Safari axles, and some other stuff.
davey32
Winch master
Posts: 12
Joined: Thu Feb 26, 2009 1:55 pm

Re: vg30 v6

Post by davey32 »

hi what you puting it in to? Im doing the same puting a vg30 and geaqr box out of a terrano into a suzuki 410 and we have the same prob. I was just going to change the frount diff head over. I have herd that the terrano gear box is quite strong.
Good luck with that...
User avatar
ALS4B
Bush Crasher
Posts: 65
Joined: Sun Dec 09, 2007 12:00 pm

Re: vg30 v6

Post by ALS4B »

was going to do the same as what you are doing, but found that if you turn the diff over the axles are only spun one way, therefor it may break axles cvs a lot easier just my thoughts tho . I have know found that a nissan cedric auto bolts up going to run a toyota transfer box .in a nissan safari rolling chassis with a suzuki body on top . :D :D
Post Reply

Return to “Tool Shed”