Wanted 50mm Lifts Blocks

[tallsam66]

Im looking to buy 10 x 50mm lift blocks for my surf.

Does anyone know where i can buy them in CHCH ?

[rangimotors]

blacks fastners do the rod, just cut it to length and drill it to suit. A couple of local 4wd shops do sets of bolts and cut and drilled blocks but if you are happy to source it yourself you will save alot.

[mattscruiser]

i have a set of 40 mm lift out of my old surf with 8.8 bolts text me john 0275405477

[Patroller]

Is it UHMWPE your after?
When i did mine about 3 years back i did a bit of ringing around and the cheapest at the time were Supply services on Hayton rd. They cut the plastic to lengths so all you had to do was drill the hole. Mine still holding up ok touch wood...

[tallsam66]

i have a set of 40 mm lift out of my old surf with 8.8 bolts text me john 0275405477

Sorry i need 50 mm so i can put on 33's

[tallsam66]

blacks fastners do the rod, just cut it to length and drill it to suit. A couple of local 4wd shops do sets of bolts and cut and drilled blocks but if you are happy to source it yourself you will save alot.

They sure do...they also have a great website...very informative
http://www.blacksfasteners.co.nz/Product%20Index/Other%20Products/Other4

Ill be going there tomorrow as can also get the bolts there....a 1 stop body lift shop

[flexy]

iv got 10 50mm lift blocks in my shed if you want give me a ring on 0276722993 i cn give you a hand to fit them to