1993 J TOP

For all Mitsubisih related topics

Post Reply
User avatar
tara13
Hard Yaka
Posts: 199
Joined: Tue May 22, 2007 12:00 pm
Location: Toad Hall Backpackers Napier

1993 J TOP

Post by tara13 »

Hi all i have just got one of these needs a bit of a tidy up .So i have a few questions 1 would any one have or know where i could get manual window winders electric ones poked. 2 have seen some kits on tard me to do ball joint flip i think were $160.00 any one done this with these kits are they any good or is there a better mod out there.I will have more questions as i start sorting things out am looking at putting 32 33 tyres on it was running 33 befor i got it so had torsion bars wound up and bigger springs in the rear 3 lt v6.
sodhimanawa
Driver/Navigator
Posts: 48
Joined: Wed Nov 29, 2006 12:00 pm
Location: Waikato
Contact:

Re: 1993 J TOP

Post by sodhimanawa »

Catch hold of Muzzaduck on Trademe. Good stuff. Cheers!
User avatar
nicinnz
Bush Crasher
Posts: 67
Joined: Sat Mar 07, 2009 2:21 pm
Location: Queenstown

Re: 1993 J TOP

Post by nicinnz »

I have some manual winders and door trims (you will need the door trims to convert electric windows to manual.
NH SWB Pajero 3.0L V6 manual Rear locker, lifted, Snorkel KL71's Warn winch Various dents and scrapes

NT LWB Pajero Exceed 3.2 Diesel Factory rear locker
User avatar
WACKO
Pyro
Posts: 990
Joined: Sat Feb 11, 2006 12:00 pm
Location: Lower Hutt

Re: 1993 J TOP

Post by WACKO »

you can fit 33s with just lifting the torsions and a small amount of guard modification. i wouldnt do the ball joint flip with spacers just because of the angle it puts on cvs. when i fliped mine i just fliped. no spacers.
sodhimanawa
Driver/Navigator
Posts: 48
Joined: Wed Nov 29, 2006 12:00 pm
Location: Waikato
Contact:

Re: 1993 J TOP

Post by sodhimanawa »

I run 35s with the flip kit ...after market torsion bars & springs in the rear with a body lift kit supplied by "muzzaduck".
Post Reply

Return to “Mitsubishi”