1993 J TOP
- tara13
- Hard Yaka
- Posts: 199
- Joined: Tue May 22, 2007 12:00 pm
- Location: Toad Hall Backpackers Napier
1993 J TOP
Hi all i have just got one of these needs a bit of a tidy up .So i have a few questions 1 would any one have or know where i could get manual window winders electric ones poked. 2 have seen some kits on tard me to do ball joint flip i think were $160.00 any one done this with these kits are they any good or is there a better mod out there.I will have more questions as i start sorting things out am looking at putting 32 33 tyres on it was running 33 befor i got it so had torsion bars wound up and bigger springs in the rear 3 lt v6.
-
- Driver/Navigator
- Posts: 48
- Joined: Wed Nov 29, 2006 12:00 pm
- Location: Waikato
- Contact:
Re: 1993 J TOP
Catch hold of Muzzaduck on Trademe. Good stuff. Cheers!
Re: 1993 J TOP
I have some manual winders and door trims (you will need the door trims to convert electric windows to manual.
NH SWB Pajero 3.0L V6 manual Rear locker, lifted, Snorkel KL71's Warn winch Various dents and scrapes
NT LWB Pajero Exceed 3.2 Diesel Factory rear locker
NT LWB Pajero Exceed 3.2 Diesel Factory rear locker
Re: 1993 J TOP
you can fit 33s with just lifting the torsions and a small amount of guard modification. i wouldnt do the ball joint flip with spacers just because of the angle it puts on cvs. when i fliped mine i just fliped. no spacers.
-
- Driver/Navigator
- Posts: 48
- Joined: Wed Nov 29, 2006 12:00 pm
- Location: Waikato
- Contact:
Re: 1993 J TOP
I run 35s with the flip kit ...after market torsion bars & springs in the rear with a body lift kit supplied by "muzzaduck".