Nissan Parts rip off

monstr · Post by **monstr** » Thu Sep 17, 2009 2:07 pm

Need a new uni joint for the pto shaft ,so off to Drive line Sorry cant help seems they are an odd ball size ,checked with just about every body in the yellow pages, same deal nobody can supply .Gave Nissan a ring ,Yep can do the complete shaft only ex Japan for $6000 plus gst ,what world do these people live in ? if anyone has any leads as to where i can get a set or two it would be very much appreciated .

Taz · Post by **Taz** » Thu Sep 17, 2009 2:50 pm

What size are they? Try Farmpart. If they don't have any that small Andrew or Gav will probably know where to steer you.

vvega · Post by **vvega** » Thu Sep 17, 2009 3:36 pm

spanner bearings in hanilton also do smaller uni's there about 500 a pop though

Jerry · Post by **Jerry** » Thu Sep 17, 2009 5:41 pm

will toyota etc ones fit?, may be worth investigating....maybe parts from teh same supplier common to both?

monstr · Post by **monstr** » Thu Sep 17, 2009 6:44 pm

Im calling around to a mates on the weekend who has a selection of Toyota shafts ,with a bit of luck i may be able to graft a toyota shaft onto the nissan one ,

Sadam_Husain · Post by **Sadam_Husain** » Thu Sep 17, 2009 6:49 pm

monstr wrote:Im calling around to a mates on the weekend who has a selection of Toyota shafts ,with a bit of luck i may be able to graft a toyota shaft onto the nissan one ,

Yeah it sounds like fabricating's going to be the cost effective solution :mrgreen:

coxsy · Post by **coxsy** » Thu Sep 17, 2009 6:53 pm

think i have some pto shafts in chch

mudy1 · Post by **mudy1** » Thu Sep 17, 2009 6:57 pm

There is a guy in the Hutt that is an engineer and may be able to help you. He builds tuff trucks. If you are interested can give you his contact details.

Taz · Post by **Taz** » Thu Sep 17, 2009 7:05 pm

coxsy wrote:think i have some pto shafts in chch

I still haven't made it back out there to pick them up yet :oops:

coxsy · Post by **coxsy** » Thu Sep 17, 2009 7:17 pm

its cool bro

pressy · Post by **pressy** » Thu Sep 17, 2009 7:26 pm

hi

have you try the bearing places, eg willson bros, saeco, twl, cts?

pressy

pressy · Post by **pressy** » Fri Sep 18, 2009 5:57 pm

hay monstr where do you live?

pressy

monstr · Post by **monstr** » Fri Sep 18, 2009 6:47 pm

Hi West Auckland,Had a quick look at a Toyota shaft today and with a bit of work it is do able ,If i cant sort some second hand shafts or new UJs ill end up going down that path ,at least Mr Toyota used a standard size thats available ..
I should add its not such a biggy to mod the shafts as i have to do one shaft anyway as ive just spent the last few weeks shifting the PTO into the rear ,Bugger all room esp with an elec high mount in the rear also ...

mudzilla · Post by **mudzilla** » Fri Sep 18, 2009 8:41 pm

6k for new shafts,, you could buy a whole spare truck for half that.
Theres a complete pto here if you need one.

mudlva · Post by **mudlva** » Sat Sep 19, 2009 3:46 pm

Hi Steve try Bettys drive shaft manufactures in manukau. theyve always been good with parts for me

cheers Rohan

coxsy · Post by **coxsy** » Mon Sep 28, 2009 7:18 pm

the drivers side widow on our focus died in the weekend the seel track the window slides on and the cables unit ford spare parts $395.00 :shock:

Nissan Parts rip off

Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off

Re: Nissan Parts rip off