As above im looking at doing some upgrades on my 1996 TJ i was looking at a
#1= 2inch lift
#2= some larger tyers ie 31 or 32 inch simex if they will fit with the lift
#3= A winch as im bound to get stuck with bigger tyers as ill try alot more lol
Im looking at doing this next year when I save some more money up. If anyone has any feedback or info about these mods plese let me know im looking for price and if these are all I will need to do or if I need to do more. I dont want it to become a tough or a club truck just better off road and still keep most of its onroad manners it has now if pos. I would also like to just mount the winch onto the bumper as it is without a bull bar with just a winch plate .
Looking at some ideas for my TJ
Looking at some ideas for my TJ
Its a Jeep thing you would'nt understand
Re: Looking at some ideas for my TJ
Have a look and a couple of the build up's/projects on here a good starting point and mite find out probs that have been found before you start
good luck
good luck
Re: Looking at some ideas for my TJ
chops wrote:As above im looking at doing some upgrades on my 1996 TJ i was looking at a
#1= 2inch lift
#2= some larger tyers ie 31 or 32 inch simex if they will fit with the lift
#3= A winch as im bound to get stuck with bigger tyers as ill try alot more lol
Im looking at doing this next year when I save some more money up. If anyone has any feedback or info about these mods plese let me know im looking for price and if these are all I will need to do or if I need to do more. I dont want it to become a tough or a club truck just better off road and still keep most of its onroad manners it has now if pos. I would also like to just mount the winch onto the bumper as it is without a bull bar with just a winch plate .
It all depends on your budget. You can actually run 31" tyres on a standard TJ as long as you do not disconnect sway bars. 32" would give you good road manners and enough clearance. These can be run on 2.5" suspension lift (disconnected front for more flex). If you go any higher, you have do things properly or it won't drive well. I have been using OME springs, but will not be getting them again (they have sagged due to the weight of stuff I have on).
You can buy a winch plate and install a winch on standard bumper. Winch plates are relatively cheap. Which winch, well again depends on the budget.
There are a few Jeepers here who have been through all this, so ask away. No need to make guesses and spend money un-necessarily.
'12 JK Rubicon V6 3.6L Auto D44/D44
- Sadam_Husain
- Angry bird
- Posts: 5164
- Joined: Mon Feb 20, 2006 12:00 pm
- Location: WELLINGTON
Re: Looking at some ideas for my TJ
chops wrote:#2= some larger tyers ie 31 or 32 inch simex if they will fit with the lift
chops wrote:I dont want it to become a tough or a club truck just better off road and still keep most of its onroad manners it has now if pos
Put the simexes on a spare set of rims coz the noise will drive you crazy on the road and they'll be bald after 10k.... they dont last long on the road


Re: Looking at some ideas for my TJ
Hey Chops
We started from a stock 96 wrangler. So far have put 2" Budget boost (coil spacers), got these off trademe, and a 1.25" body lift. Am currently running 31" Coopers on stock rims with a front quick disco. Am going to 15x8 rims with a -ve25mm offset and 33's. Hopefully there will not be to much rubbing. Have popped a winch on recently, both plate and winch were on trademe as well.
Will probably leave it at that once the 33's are on.
Just one option for you

We started from a stock 96 wrangler. So far have put 2" Budget boost (coil spacers), got these off trademe, and a 1.25" body lift. Am currently running 31" Coopers on stock rims with a front quick disco. Am going to 15x8 rims with a -ve25mm offset and 33's. Hopefully there will not be to much rubbing. Have popped a winch on recently, both plate and winch were on trademe as well.
Will probably leave it at that once the 33's are on.
Just one option for you


96 Wrangler Sport. 2"BB, 1.25"BL, Front discos, Adjustable rear trac bar, Cb and yet more to come! "Its a jeep thing"
Re: Looking at some ideas for my TJ
RJ wrote:Hey Chops
We started from a stock 96 wrangler. So far have put 2" Budget boost (coil spacers), got these off trademe, and a 1.25" body lift. Am currently running 31" Coopers on stock rims with a front quick disco. Am going to 15x8 rims with a -ve25mm offset and 33's. Hopefully there will not be to much rubbing. Have popped a winch on recently, both plate and winch were on trademe as well.
Will probably leave it at that once the 33's are on.
Just one option for you
that looks just like what i am hopping to do with mine. How is the ride now and would i have to do a body lift to fit 32's do you think just on the standard jeep rims
Its a Jeep thing you would'nt understand
Re: Looking at some ideas for my TJ
Sadam_Husain wrote:chops wrote:#2= some larger tyers ie 31 or 32 inch simex if they will fit with the liftchops wrote:I dont want it to become a tough or a club truck just better off road and still keep most of its onroad manners it has now if pos
Put the simexes on a spare set of rims coz the noise will drive you crazy on the road and they'll be bald after 10k.... they dont last long on the road![]()
yeh any offroad rubber i get will be on sep rims i have firestone atx 23 in 30in at the mo and goodyear atx as my roads/summer rubber so eill be making my atx as road and something like simex as offroad only and driving to and home from the track
Its a Jeep thing you would'nt understand