
26th 27th sept
26th 27th sept
gave the safari some black polish to hide the lesser scratchs james sand blasted bits of the fj 's firewall, and gave it some paint 

89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
Re: 26th 27th sept
I won a PRS radio and a CB radio on Trademe so i think the plan for tomorrow is to put thoses bad boy in 

Your name is Bolo and it will stay that way until you have earnt the right to be called your real name........................ Bolo
Re: 26th 27th sept
Got the motor out of my hilux, cheers to tara13 and curly12


85 Hilux single cab
02 Grand Vitara
02 Grand Vitara
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
Re: 26th 27th sept
started this weekend with waterblasting the 40
removed the armstrong steering and started to mount up the powersteering
just need to make up a mount for the box
wiring will be repaired 2mrw after the wee fire from last week
removed the armstrong steering and started to mount up the powersteering
just need to make up a mount for the box
wiring will be repaired 2mrw after the wee fire from last week

Re: 26th 27th sept
Shiny got a nice wash on the outside today......
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
Re: 26th 27th sept
cooked my new rangie killed the phone think thats enough for this weekend 

Re: 26th 27th sept
Striped rear diff head, exhaust, shackles outa the bighorn
New LSD diff head in, extended shakles and new(ish) bushes in, exhaust going in tonight and adjust handbrake for the WOF
2morro gona finish my winch mount that ive been meaning to for ages, and tweek the torson bars so they level with the back.
mite look at parts trucks right hub taking that off so i can replace it and give it a run in a few weeks time. put a Locked diff back in when i pulled the LSD out
Also taking half an anglia to the vintage car parts shed tomorrow morning as ive run out of good bits to use on it...
mite even sleep at some point....
New LSD diff head in, extended shakles and new(ish) bushes in, exhaust going in tonight and adjust handbrake for the WOF
2morro gona finish my winch mount that ive been meaning to for ages, and tweek the torson bars so they level with the back.
mite look at parts trucks right hub taking that off so i can replace it and give it a run in a few weeks time. put a Locked diff back in when i pulled the LSD out


Also taking half an anglia to the vintage car parts shed tomorrow morning as ive run out of good bits to use on it...
mite even sleep at some point....
- curly12
- Hard Yaka
- Posts: 1335
- Joined: Fri Mar 02, 2007 12:00 pm
- Location: Whangarei or there abouts!!
Re: 26th 27th sept
nstacey wrote:Got the motor out of my hilux, cheers to tara13 and curly12
What about that bit of bling on the drivers side with the blue tape............


Growing old is compulsory, growing up is optional
Farken homeless..................................
Farken homeless..................................
Re: 26th 27th sept
curly12 wrote:nstacey wrote:Got the motor out of my hilux and got the power steering box mounted, cheers to tara13 and curly12
What about that bit of bling on the drivers side with the blue tape............![]()
oh yeah, edited
85 Hilux single cab
02 Grand Vitara
02 Grand Vitara
Re: 26th 27th sept
brought truck home today... finally
rad on back and trans cooler setup done
new exhaust system and for now .. ln130 seats ...
rad on back and trans cooler setup done
new exhaust system and for now .. ln130 seats ...
Kiwi4x4
Re: 26th 27th sept
Peeled donor body off and fitted it to the new rig. Made front end fully removable (like the old mutt) and started making up new brake lines.
Things have gone quite good on this build, it was only 2.5 months ago that I only had 2 bare chassis rails in the garage. Woohoo.
Things have gone quite good on this build, it was only 2.5 months ago that I only had 2 bare chassis rails in the garage. Woohoo.
Ugly is a state of mind..... and the state of my truck!
Re: 26th 27th sept
Started making my new front bar today, just need to paint it and then fit to truck.
Tomorrow looking at doing the side bars from front to rear.
Photo's to be added tomorrow.

Tomorrow looking at doing the side bars from front to rear.
Photo's to be added tomorrow.

- You Get That
- Hard Yaka
- Posts: 429
- Joined: Wed Aug 26, 2009 4:05 pm
- Location: Southland
Re: 26th 27th sept
Put a snorkel on a friends surf went bush and played in some mud.
Addicted to suzukis....
Re: 26th 27th sept
Chchshrek wrote:Striped rear diff head, exhaust, shackles outa the bighorn
New LSD diff head in, extended shakles
XX Snip XX
How long are the shackles that you have fitted ??
There is no mechanical problem so difficult that it cannot be solved by brute strength and ignorance.
Re: 26th 27th sept
dazza85 wrote:Chchshrek wrote:Striped rear diff head, exhaust, shackles outa the bighorn
New LSD diff head in, extended shakles
XX Snip XX
How long are the shackles that you have fitted ??
they are about 2 inchs longer, so 1 inch lift so nothing to major but it all helps.
Exhaust faught me so not in, but was starting to make mistakes so chucked it in for the night and ill sort it tommorow
- Beer_Cruiser
- Hard Yaka
- Posts: 859
- Joined: Tue Jun 05, 2007 12:00 pm
- Location: now in B O P
Re: 26th 27th sept
stinky wrote:cooked my new rangie killed the phone think thats enough for this weekend
Is it cooked to death as in "Jerry did eggs for breakfast". Or can it be saved....
Re: 26th 27th sept
Well after 2 days of work on the truck I now have these....


Lyn grabed the camera and said that we now have a haystack like a Kenworth truck

The rest are here <--Click the link



Lyn grabed the camera and said that we now have a haystack like a Kenworth truck




The rest are here <--Click the link

Re: 26th 27th sept
well, finaly got round to rewiring the lux after those low lifes stole it and stuffed my loom and ignition.
bought this very porno switch panel to replace the old ignition

bought this very porno switch panel to replace the old ignition


swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
Re: 26th 27th sept
niblik wrote:good shit rok..
i worked on the 40... quite the novelty to work on her again..






What did you do???????


(blowing the dust off it doesn't count


lax2wlg wrote:Is that like saying 'she's hot, for a crackwhore??
Re: 26th 27th sept
suzuki1k wrote:Well after 2 days of work on the truck I now have these....
Lyn grabed the camera and said that we now have a haystack like a Kenworth truck![]()
![]()
![]()
The rest are here <--Click the link
Looking really good mate..


Your name is Bolo and it will stay that way until you have earnt the right to be called your real name........................ Bolo
Re: 26th 27th sept
Wel the plan was to put the radios in ...but i didnt have enouh time and i need some external speakers to hear them .. so ill have to get them first ( so hopefully this week)..
But went down to the hutt and comeing into Melling and my bloody slave cylinder on my clutch died so i had no clutch
.. so i had to get Greekstyle to come and get me ... oredered a new slave and it will be here on Tuesday .so i can put that in for the working weekend at rallys hopefully 
But went down to the hutt and comeing into Melling and my bloody slave cylinder on my clutch died so i had no clutch


Your name is Bolo and it will stay that way until you have earnt the right to be called your real name........................ Bolo
Re: 26th 27th sept
Finished putting new muffler on truck, much smaller and free flow, sounds heaps better and I think it goes a bit too. need to get two new tubes for the 35's after doing them last weekend.
Re: 26th 27th sept
Finished fitting spare set of leaves to the front of the cruiser along with new greasable shackles and nolethane bushes that arrived the other day.
The old shackles and bushes were stuffed, I had to persuade them out with a 10lbs sledge, angle grinder and big drill bit! I only planned to fit the better springs because the old ones are so sagged but then I found how bung the shackles were I couldn't bare to put them back in!!
Nothing like fitting new galved shackles, greasing everything and nice new nolethane bushes
I was amazed to find it had raised it 4 inches!! Looks a bit silly since I haven't done the back yet
The old shackles and bushes were stuffed, I had to persuade them out with a 10lbs sledge, angle grinder and big drill bit! I only planned to fit the better springs because the old ones are so sagged but then I found how bung the shackles were I couldn't bare to put them back in!!

Nothing like fitting new galved shackles, greasing everything and nice new nolethane bushes

I was amazed to find it had raised it 4 inches!! Looks a bit silly since I haven't done the back yet

1985 Toyota Landcruiser BJ73 with 13B-T
- curly12
- Hard Yaka
- Posts: 1335
- Joined: Fri Mar 02, 2007 12:00 pm
- Location: Whangarei or there abouts!!
Re: 26th 27th sept
Helped Nick and Tara13 with the removal of Nick's motor, bolted up his powersteering box.
Looked at Bubba's sorry sad assed sack of shit.
Wondered why the fark he drives it, fill's everything full of mud, parks it up for a few weeks and then wonders why the starter and alternator pack a sad....
Clean the farken thing next time Bubba



Looked at Bubba's sorry sad assed sack of shit.



Clean the farken thing next time Bubba


Growing old is compulsory, growing up is optional
Farken homeless..................................
Farken homeless..................................
Re: 26th 27th sept
Towed the half and anglia to the Vintage Car Parts Shed, they were eyeing bits up before it got off the trailer, but they were very pleased to see it.
Got the exhaust in after many swear words and effort. Should have taken it to magoos lol
Got the passengeres side of the front bar done and half grinded before it got too late, ill sort the other one in the next few day hopefully....
Lots done to the truck on the weekend, most of which you cant see, but all good.
Shrek
Got the exhaust in after many swear words and effort. Should have taken it to magoos lol
Got the passengeres side of the front bar done and half grinded before it got too late, ill sort the other one in the next few day hopefully....
Lots done to the truck on the weekend, most of which you cant see, but all good.
Shrek