just wanting to know if 93 vx cruiser is electronic or cable speedo. if electronic how easy is it wire in switch.
cheers
speedo
- firestonecruiser
- Hard Yaka
- Posts: 431
- Joined: Mon Aug 24, 2009 8:40 pm
- Location: ashburton
Re: speedo
crawl underneath and have a look for a speedo cable.I think electronic started with 24valve ones (could be wrong thou) my 95 24valve is electronic.
FJ40,INJECTED SB 406 CHEV, LOCKER,35 SIMEXS,warn winch , 80seies vx 4.2 24v turbo diesel ,fr and rear lockers 3" exh top mount intercooler, 021 724482
Re: speedo
That of course would be illegal, but hypotheically...
If you track the odometer stepper motor wiring then just cut the wire (or the track on the circuit board), solder in a small switch that can be hidden under the dash (and I mean well hidden, if it is ever found during a wof or anything...). But remember that a vehicle that turns up for a warrant without ticking over any km's is going to look suspect.
Of course if you were to use this 'just when offroad' so you didnt have to claim back road user tax, I guess it would be a ligitimate excuse to do it (pushing it here I think).
So thats it hypothetically but of course you wouldnt do it you were just curious and had heard about it and thought that cant be done. It can be done but your not supposed to...

If you track the odometer stepper motor wiring then just cut the wire (or the track on the circuit board), solder in a small switch that can be hidden under the dash (and I mean well hidden, if it is ever found during a wof or anything...). But remember that a vehicle that turns up for a warrant without ticking over any km's is going to look suspect.
Of course if you were to use this 'just when offroad' so you didnt have to claim back road user tax, I guess it would be a ligitimate excuse to do it (pushing it here I think).
So thats it hypothetically but of course you wouldnt do it you were just curious and had heard about it and thought that cant be done. It can be done but your not supposed to...

Re: speedo
hypothetically you could use a solder sucker and suck the solder off one terminal on the back of the circuit board then solder a piece of wire(for a hypothetical switch)on to the top of the exposed terminal across to the other end of the track on the circuit board(which hypothetically could be a diode )then when you hypothetically sell it later on just resolder the terminal removing your hypothetical wire and no one is the wiser hypothetically speaking of course 

FJ40,INJECTED SB 406 CHEV, LOCKER,35 SIMEXS,warn winch , 80seies vx 4.2 24v turbo diesel ,fr and rear lockers 3" exh top mount intercooler, 021 724482
Re: speedo
Yep,
what he didnt say. 


Re: speedo
Would this cut of the odometer only, or rev/speedo too?
Re: speedo
If done right (if your sustem allows) it cuts off only the motor that drives the odometer and leaves the speedo intact, so you can still see speeds.
If it cuts the speedo then get a cheap gps, although does the speedo affect the ECU in some way.
If it cuts the speedo then get a cheap gps, although does the speedo affect the ECU in some way.
- rangimotors
- Hard Yaka
- Posts: 1631
- Joined: Thu May 10, 2007 12:00 pm
- Location: chch
Re: speedo
if you are going to do it you need to put a switch in because cops can pull you up and ask you to drive up the road and come back, if your spedo has not changed you are in for a big ticket.
Selling a vechicle that does not truely show its actual distance travelled is a criminal offence so you you cant get away with saying its for use off road only.
Just convert to a petrol
Selling a vechicle that does not truely show its actual distance travelled is a criminal offence so you you cant get away with saying its for use off road only.
Just convert to a petrol

Never argue with an idiot, they drag you down to their level then beat you with experiance!
Re: speedo
I suspect that even though the speedo will stop the ECU will still be noting the milage driven & still show the timing belt light when its due.
Re: speedo
firestonecruiser wrote:just wanting to know if 93 vx cruiser is electronic or cable speedo. if electronic how easy is it wire in switch.
cheers
dont worry about it ,it wont be worth fark all when you have finished wiv it ,lmfa0, by the way that tjm bar looked way better on my saf than ur POS
vince....
- firestonecruiser
- Hard Yaka
- Posts: 431
- Joined: Mon Aug 24, 2009 8:40 pm
- Location: ashburton
Re: speedo
cheers guys for the info, may take a look at it hypothetically. vince the tjm bar looks way better on my cruiser than ya saf.