auckland ore meeting night
Re: auckland ore meeting night
Pencil me in! Could meet at the Bombay BP and go down as a convoy?
Re: auckland ore meeting night
if i cant go this sunday consider me a pencil in....
Re: auckland ore meeting night
J_Dub wrote:if i cant go this sunday consider me a pencil in....
Why not go both ?

So all penciled in, meet at the bombay BP (the on at the ofturn to puke) at say 9ish ?
To Boon or not to Boon.
Re: auckland ore meeting night
yea i could, but this sunday i might not be able to get outa this bbq.
beter to meet at the Caltex bombay which is left at top of offramp which gets you straight back onto the onramp
beter to meet at the Caltex bombay which is left at top of offramp which gets you straight back onto the onramp
Re: auckland ore meeting night
T-Boon wrote:ok, so how about Sat the 19th ?
Could pencil it in and see who`s keen ?
i should be there + 1 other 4wd
- Andrew1706
- Hard Yaka
- Posts: 716
- Joined: Wed Nov 28, 2007 12:00 pm
- Location: Auckland
Re: auckland ore meeting night
Gutted my truck isn't in a legal driveable state at the moment 

Re: auckland ore meeting night
Andrew1706 wrote:Gutted my truck isn't in a legal driveable state at the moment
You got a weekend and week to get it sorted

Whats it need ?
To Boon or not to Boon.
Re: auckland ore meeting night
T-Boon wrote:You got a weekend and week to get it sorted
Don't rub it in , my list seems to get longer every day. all those little things you keep putting off doing.
Radiator is fixed though

Does anyone have a air compressor i would be able to use on the day? mine has burned out all the brushes and unsure if ill get replacements in time.
C.
LR110 ..... LJ50 project
Chris.

Chris.
Re: auckland ore meeting night
yeah, i`ll have my little portable one with me. hasnt let me down so far 

To Boon or not to Boon.
Re: auckland ore meeting night
Yeah I have an air compressor too. Got some Force tyre deflators too (Staun copies) which I'm keen to try out. I can get a whole bunch of sacks from work as the D shackles we import come in them
Last edited by 4x4Matt on Fri Dec 11, 2009 11:42 am, edited 1 time in total.
- Andrew1706
- Hard Yaka
- Posts: 716
- Joined: Wed Nov 28, 2007 12:00 pm
- Location: Auckland
Re: auckland ore meeting night
T-Boon wrote:yeah, i`ll have my little portable one with me. hasnt let me down so far
Wouldn't be a very good compressor if it did

My list involves: finishing dropboxes, finish headlight wiring, convert back to standard to get a WOF/do my suspension lift properly and get a cert then wof then reg then diesel milage

Sucks because I finally got my winch setup too and wanna try it out!
All in good time, much rather sit on it then drive it and get caught and fined

Re: auckland ore meeting night
not worth paying $40 for a trailer for the day 
Trailer to and from = problem solved

Trailer to and from = problem solved

To Boon or not to Boon.
Re: auckland ore meeting night
So is this happening this Sat?
and are we still meeting at 9am?
which service station
and are we still meeting at 9am?
which service station
Re: auckland ore meeting night
snork wrote:So is this happening this Sat?
and are we still meeting at 9am?
which service station
x2?
sounds like its a no shiney trip..
muds, lift, recovery points front and rear minimum ide say
Re: auckland ore meeting night
I have a lift , rear locker, winch and simexs will be there 

Last edited by coxsy on Mon Dec 14, 2009 7:07 pm, edited 1 time in total.
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
Re: auckland ore meeting night
J_Dub wrote:
sounds like its a no shiney trip..
[/quote]
what makes you say that?
Re: auckland ore meeting night
Yep, i`m deff there, This sat, what time should we meet a the caltex ? Remember its a $10 donation at the gate so bring some cash.
To Boon or not to Boon.
Re: auckland ore meeting night
someone wrote 9,am
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
Re: auckland ore meeting night
yeah i thought it was 9am as well.
I wont be going any further than ABC rock / loop start
quote from another thread from the guys who were up there yesterday
I wont be going any further than ABC rock / loop start
quote from another thread from the guys who were up there yesterday
DieselBoy wrote:On a serious note, the track is going to be in need of some maintenance by the end of the year, IT IS NOT A SHINY TRACK ANYMORE.
We had busted and bent bumpers and flares on all four corners on the SWB Prado and it needed towing 3 or four times on the main track, the SWB Safari with us lost all its flares, some minor panel damage to the front end and blew a tyre off the bead.
Most of the damage occurred on the stretch of track between where the gated loop track branches off and the Tram car at the Tairua river.
Make sure you guy's all donate ya 10 bucks, its gonna be needed to run the digger to patch the track up this year!!!!!!
LR110 ..... LJ50 project
Chris.

Chris.
Re: auckland ore meeting night
9am it is, and yeah its deff not a shiny track, and i think we`ll go up to the loop and chill there for a bit, then back. bit of filling and maintenance on the way if anyone knows what there doing
The loop is deff pannel damage teritory.

The loop is deff pannel damage teritory.
To Boon or not to Boon.
Re: auckland ore meeting night
Unfortunately I'm going to have to pull out. The Hilux has hit a bit of a hurdle needing some structural rust work done for the WOF where the previous owner has bogged over. There goes more $$ just intime for Christmas 

Re: auckland ore meeting night
pencil me in.
9am at caltex
me and my brother in his truck = 2trucks
9am at caltex
me and my brother in his truck = 2trucks
Re: auckland ore meeting night
which one is Caltex? the one over the other side of the motorway?
Re: auckland ore meeting night
To Boon or not to Boon.
Re: auckland ore meeting night
T-Boon wrote:http://maps.google.co.nz/maps?f=q&source=s_q&hl=en&geocode=&q=bombay&sll=-41.244772,172.617188&sspn=35.221643,56.162109&ie=UTF8&hq=&hnear=Bombay,+Auckland&ll=-37.192074,174.982215&spn=0.002286,0.003428&t=h&z=18
Right next to the information centre
sweet
u bring matt?
Re: auckland ore meeting night
i thought info center was other side a the motorway at the autobarn.
caltex is right beside the offramp, get off turn left.. which is right on the onramp to get back on going south..
i should be a definate but im spose to be going on the workshop xmas doo Friday... would rather be out wheeling than bein hungover..
is the loop start point at where that litle camp site is???????
caltex is right beside the offramp, get off turn left.. which is right on the onramp to get back on going south..
i should be a definate but im spose to be going on the workshop xmas doo Friday... would rather be out wheeling than bein hungover..
is the loop start point at where that litle camp site is???????
Re: auckland ore meeting night
yep thats the one, the camp and that little shelter place.
To Boon or not to Boon.
Re: auckland ore meeting night
so how many trucks we got going?
2 here....
2 here....