91 surf...just a beater for the moment

[skidtoy]

heres my surf,v6 auto.i put a suspension lift in it and bodylift on the way,also got 35inch maxxis's and 15x10 rims to fit.just gona run it as it is until it gets abit ruff then strip it chuck my toyota 1u v8 motor in put a cage in and use it for racing.with buying all the tyres,rims,bodylift,suspension lift and the truck it owes my 4g which is why im not to worried about it getting dents or getting put on its side...i also run a wheel and tyre shop so that helps in keeping costs down.couple of pics how its looking at the moment on 32inch tyres i had off another truck.



some tyres

[You Get That]

Nice how big is the Lift you have in it?

[skidtoy]

2inch suspension lift in it at the moment,but mite get some 3inch lift springs and new front arms from auzzie cos i dont really like just doing the front bars up to lift it. just waiting for my bodylift blocks to turn up also so then i can out the 35inch tyres on also which will lift it another 1inch or so.

[J_Dub]

cool little staffy in the background

[skidtoy]

cool little staffy in the background

thats my dog Dee,he's a staffy / bull terrior cross...built like a tank but nothing but a big baby.

[skidtoy]

removed the rear swaybar as 1 of the mounts broke...upside is goes alot better offroad now without the it in there until wof time.

[Lynx]

Just completely take it off, my truck still gets wofs with out one

[skidtoy]

Just completely take it off, my truck still gets wofs with out one

i did take the whole thing out,keeping it tho as i will need it for cert.gota pull the front drivers side axle / diff apart as its leaking alot of oil now after hitting some rocks haha should just be a seal by the look of it tho.

[UBZ]

you should be able to pull the CV / axle flange / stub off from the drivers side without removing the the front diff. or you can drop the front diff out with out removing the CV's / hubs etc from the a-arms

Diff axle Seal part num is # BD2992F. have a pic to if you need it. same seal both sides.

Hope you have some spare CV's / front diffs , if you are planing on running the 35's.


rear sway bar mine never had one from factory

[skidtoy]

you should be able to pull the CV / axle flange / stub off from the drivers side without removing the the front diff. or you can drop the front diff out with out removing the CV's / hubs etc from the a-arms

Diff axle Seal part num is # BD2992F. have a pic to if you need it. same seal both sides.

Hope you have some spare CV's / front diffs , if you are planing on running the 35's.


rear sway bar mine never had one from factory

yea shouldnt be to bad doing the diff ordered the seals today for both sides.i used to have to pull Merlo 4wd,4wheel steer lift trucks apart in auz for a job so shouldnt be to hard id be thinking...and yea ill break some stuff but thats part of the fun of it haha

[skidtoy]

put the bodylift in at last and put my wheels on,still gota do acouple of things yet to it like cut some of the inner wheel guard where it rubs...im thinking it would look cooler couple more inchs higher,i know the higher i go it will get worse offroad,but ive only got a surf cos i got it cheap im still looking for a nice cheap early 90s 3ltr parado

[You Get That]

Hey man dont say that surfs rule!!!!!
I like what you have done to it it looks pretty sweet