POS PAJ MOTOR & TRANS SWAP

For all Mitsubisih related topics

Post Reply
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

POS PAJ MOTOR & TRANS SWAP

Post by motorhead »

All jokes aside :evil: , when does it end? Glow plugs, broken rocker arm and scored cam, head gasket, electrical problems, starter ring gear and now the front main seal is blowing oil. It never leaked a drop before. The underside of the wagon always clean and dry. Is something plugged up? When I blow into the breather tube(from rocker cover to air inlet) it will let pressure build and the take no more air, is this right? Don't think it's a seal failure but pressure build up.

Need help please :oops:
Last edited by motorhead on Mon Mar 15, 2010 7:14 pm, edited 1 time in total.
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
Lynx
Hard Yaka
Posts: 600
Joined: Tue Jan 20, 2009 9:55 pm

Re: POS PAJ

Post by Lynx »

Check it doesnt have a PCV valve

Cheers Daniel
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ

Post by motorhead »

Lynx wrote:Check it doesnt have a PCV valve

Cheers Daniel


None.

I was about 80ks out of town when I first spotted leak, remove breather tube from air inlet on the way back home and it "seemed" to leak less but could be wishfull thinking :roll:
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
chevrolux
Hard Yaka
Posts: 294
Joined: Tue May 12, 2009 10:42 pm
Location: Palmy north

Re: POS PAJ

Post by chevrolux »

My paj drops oil too. Where is the 'PCV' valve?
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ

Post by motorhead »

No PCV noted anywhere. Lost just under a liter in about 80 ks
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ

Post by motorhead »

Ok, I've made a decision...found out the increase of crankcase pressure more then likely due to worn rings. With that in mind and the fact that the fly wheel gear being bad and trans bearings are starting to growl abit, I am going to recon parts truck motor and swap it into my wagon along with the auto trans.

Need to swap pedal assy, drive shafts, center consoul...anything else? Is the computer the same?

Any advise would be great :D
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
Bolo
2XL
Posts: 697
Joined: Mon Mar 31, 2008 8:00 pm
Location: Welly

Re: POS PAJ MOTOR & TRANS SWAP

Post by Bolo »

I would swap the motor , but not the auto, there will be extra wireing needed to run the auto gearbox... it would be better to keep you eye on trademe or another manual gearbox and go from there ( My 2 cents )
Your name is Bolo and it will stay that way until you have earnt the right to be called your real name........................ Bolo
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: POS PAJ MOTOR & TRANS SWAP

Post by SV1K »

Hay Motorhead, what is the outcome for this?
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ MOTOR & TRANS SWAP

Post by motorhead »

Had front seal replaced, leaks a little still due to excessive blowby. Removed breather vent tube from inlet and put to catch can but still have a pressure build up :twisted: Found a broken balance shaft belt, runs much smoother now :D .

Is the 2.8 a drop in? What about wiring? Would it be worth the trouble?
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: POS PAJ MOTOR & TRANS SWAP

Post by SV1K »

:lol: :lol: :lol: :lol: :lol: :lol: :lol: Look above your avator :lol: :lol: :lol: :lol: :lol: :lol: :lol:
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ MOTOR & TRANS SWAP

Post by motorhead »

I saw it, nice to see you have some pull....your just usually pulling yourself :? :shock:
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ MOTOR & TRANS SWAP

Post by motorhead »

suzuki1k wrote::lol: :lol: :lol: :lol: :lol: :lol: :lol: Look above your avator :lol: :lol: :lol: :lol: :lol: :lol: :lol:


come on Reece, still waiting for a reply :wink:
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
chrome
Hard Yaka
Posts: 946
Joined: Wed Jul 20, 2005 12:00 pm
Location: the swamp

Re: POS PAJ MOTOR & TRANS SWAP

Post by chrome »

what are you talkin aboot ayyyee,
DIRTY OLD HILUX
022 519 7700
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ MOTOR & TRANS SWAP

Post by motorhead »

chrome wrote:what are you talkin aboot ayyyee,


:roll: :roll: :roll: :roll: :roll: :wink:
'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: POS PAJ MOTOR & TRANS SWAP

Post by SV1K »

motorhead wrote:I saw it, nice to see you have some pull....your just usually pulling yourself :? :shock:


Nah mate, don't have to pull myself, unlike Canadian's we Kiwi blokes don't need to express ourselves all the time.... :lol: :lol: :lol: :lol:

8)
User avatar
motorhead
Canadian
Posts: 227
Joined: Mon Oct 05, 2009 3:09 pm
Location: Martinborough

Re: POS PAJ MOTOR & TRANS SWAP

Post by motorhead »

'Shit Happens"
?????NEXT?????
06 306 6098
021 02759048
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: POS PAJ MOTOR & TRANS SWAP

Post by haynzy »

suzuki1k wrote:
motorhead wrote:I saw it, nice to see you have some pull....your just usually pulling yourself :? :shock:


Nah mate, don't have to pull myself, unlike Canadian's we Kiwi blokes don't need to express ourselves all the time.... :lol: :lol: :lol: :lol:

8)

carefull reece we all know men are either wankers or liers :lol:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
User avatar
fj40
Hard Yaka
Posts: 317
Joined: Thu Oct 05, 2006 12:00 pm
Location: palmerston north

Re: POS PAJ MOTOR & TRANS SWAP

Post by fj40 »

lots of posts on here about ya paj must be time for a suzuki :wink:
its not how big the 4x4 is its how angry the diver is
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: POS PAJ MOTOR & TRANS SWAP

Post by SV1K »

haynzy wrote:
suzuki1k wrote:
motorhead wrote:I saw it, nice to see you have some pull....your just usually pulling yourself :? :shock:


Nah mate, don't have to pull myself, unlike Canadian's we Kiwi blokes don't need to express ourselves all the time.... :lol: :lol: :lol: :lol:

8)

carefull reece we all know men are either wankers or liers :lol:


Yeah Haynzy, but us Kiwi blokes are known to be liars :lol: :lol: :lol: :lol: :lol: :lol: :lol: :mrgreen: :mrgreen:

8)
Post Reply

Return to “Mitsubishi”