Terrano filly

Starting a project or modification? Then post it's progress here and show us some pic's.
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Terrano filly

Post by hillfilly »

Tonight I got a phone call saying the front of my truck had fallen off :shock: :shock: :shock:
Holy Cow
and a text .....“Hi there ur truck is being turn in 2 a mans truck now........” :? :? :roll: :roll:

Reply was “No comment” when I asked if I have to now drive like a man.

However it got me remembering when I first saw my truck
Image
As my brother found it.

Early trips barely noticeable modifications for both of us

Image

Image

Image

Image

Image

Things need adjusting mmmmmmm

Image

Image

Try these tyres

Image
Not what if, but why not
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

Image


Snorkel time

Image

Room needed

Image

Image

Measure twice

Image

Cut once

Image

Image

Nearly swimming time
Not what if, but why not
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

Time to check the tyres
Flex testing last night

low flex test

Image

Image

Yep trim has to go

Image

Flex a wee bit higher up


Image

Image


Then I went blissfully home
until the phone call , now who knows what she looks like....

I need to get in there
Not what if, but why not
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

he he :lol: :lol: well i pulled the front appart and what would you know bare wires :shock: hhmmmm well the wires of the old spotties wer exposed due to rubbing on the aircon radiator and 1 wire was ripped out of the horn on the drivers side so i fixed those and then the radiator was full of dry mud ... where you been ??? :roll: or is that last yrs mud ??? :P :P :lol: the drivers side front guard has 15 mm more clearance to the front of the tire now thanks to a rubber hammer :wink: :wink: ive thrown the bumper off was not worth leaving on due to the shape :twisted: :twisted: :idea: decided to mod some old bars a mate offerd and that as far as i got last nite :mrgreen: :mrgreen:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Re: Terrano filly

Post by kiwipete »

Starting to look like a real truck now. :wink: :wink: :wink:
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

She looks a bit bare ......... :lol: :lol: :lol:
I really do have to get better at washing the mud out though I think :oops: :oops:


Image
Not what if, but why not
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Re: Terrano filly

Post by kiwipete »

Remind me sometime, never to let Nuts near my truck. :lol:
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

kiwipete wrote:Remind me sometime, never to let Nuts near my truck. :lol:

dont be like that pete i,ll only change it a bit :twisted: :twisted:

stil getting the steel together hopefully tomorrow start the bar build :roll: :wink:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Re: Terrano filly

Post by kiwipete »

nuts wrote:
kiwipete wrote:Remind me sometime, never to let Nuts near my truck. :lol:

dont be like that pete i,ll only change it a bit :twisted: :twisted:

stil getting the steel together hopefully tomorrow start the bar build :roll: :wink:

Maybe I need to escape over to yours with all my bits n bobs and together we can finish her off......................
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

kiwipete wrote:
nuts wrote:
kiwipete wrote:Remind me sometime, never to let Nuts near my truck. :lol:

dont be like that pete i,ll only change it a bit :twisted: :twisted:

stil getting the steel together hopefully tomorrow start the bar build :roll: :wink:

Maybe I need to escape over to yours with all my bits n bobs and together we can finish her off......................


got some more steel to do the job so far the supaglue is holding :lol: :lol: :lol: :lol: :lol:

used 6 mm plate all tack welded so u get some idea of what it looks like ive made it so the winch goes inside the barwork:roll: :roll: :roll: :wink:
any way bevs loading the pics while i harras on here som pete let me at yours ive got spare supa glue ive kept just for yours :P :P :P :P :twisted:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

Where to start :?: :?: :?: :?:

Image


Spotlight wires hanging free :roll: :roll: :roll:

Image

Lets see.....


Image

A bit bare

Image


Grill back on
Image

A wee bit more panel beating needed....gee that whale packed a wallop a while back :wink: :wink: :wink:
Image
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

heavy gauge angle iron and 12mm flat bar
Image

Chassis bracket complete

Image

Yes hillfilly even helped :lol: :lol: :lol:

Image

Sore back coming up

Image

vented bashplate

Image

closeup of venting

Image

drainage for excess water


Image

Tacking in corners

Image


Side view of corner

Image

Top view, ( gussets to go in yet)

Image

What is done so far....that's it for today :lol: :lol:

Image

Indicators inserted in here later

Image
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Re: Terrano filly

Post by kiwipete »

That's one solid bar Nuts, keen to see the rest of the pics.
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

kiwipete wrote:That's one solid bar Nuts, keen to see the rest of the pics.


Do you think he is trying to tell me something about my driving :oops: :roll: :roll: :lol: :lol: :lol: :lol:

I've been told that the bashplate and bar may take the knocks but my truck won't :( :(
soooooooooooo no going crazy :lol: :lol: :lol:
Not what if, but why not
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

Another day on the "terranosaurus"

Image

indicator slots cut

Image

View from the top

Image

Will fit nicely .....

Image

Back off for welding

Image

Looking good

Image

They should let the air flow

Image

Internal view

Image
Not what if, but why not
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

Measure......

Image

Square up.....

Image

welding......


Image

Mind your eyes.........

Image

Happy helper.......thanks Bob

Image

Watch the flash....

Image

Coming together......

Image

Nice welding ......

Image

To hold the indicators in......

Image

Ok, ok I know I'm a hazard and I have the lights to prove it :wink: :wink: :lol: :lol:

Image
Not what if, but why not
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

geez bev put some more hours in :roll: :roll: there are only so many i can do :lol: :lol: :lol: :lol:
should have it all done tomorow night if ya get ya bum into gear :P :P :P :lol: :lol: oh and thanx bob for ya much needed help :D :D
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

nuts wrote:geez bev put some more hours in :roll: :roll: there are only so many i can do :lol: :lol: :lol: :lol:
should have it all done tomorow night if ya get ya bum into gear :P :P :P :lol: :lol: oh and thanx bob for ya much needed help :D :D


Will have my butt in there as soon as tomorrow and
from tomorrow night on it's not my butt you want to worry about ........ :wink: :wink: :wink: :lol: :lol: :lol:

ps....plans and ideas in his head to change the rear end of the terranosaurus ........

after Easter my friend .....after Easter :lol: :lol: :lol:
Not what if, but why not
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: Terrano filly

Post by PR »

Nuts is just sick of cutting down fallen trees :wink: so he making your truck into a bulldoser :lol: :lol:

PS you can be in the front cause I dont want you following me :shock:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

PR wrote:Nuts is just sick of cutting down fallen trees :wink: so he making your truck into a bulldoser :lol: :lol:

PS you can be in the front cause I dont want you following me :shock:

oi i cant wait to get out me chainsaw :twisted: :twisted: :twisted: what you on about pr :?: :?: bbwwwwwuuuaaahhhhh :lol: :lol: :lol: :lol:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

PR wrote:Nuts is just sick of cutting down fallen trees :wink: so he making your truck into a bulldoser :lol: :lol:

PS you can be in the front cause I dont want you following me :shock:


Ladies first .....awwwwwww....you are such a gentleman anyone would think you didn't like the friendly Coast and a wee cuddle from my (NBB) purpose built Coastal Cruise Bar :wink: :wink: :wink:

Wouldn't feel a thing myself and most go home with a wee bit of Coast customisation of some sort :wink: :lol: :lol:
Not what if, but why not
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: Terrano filly

Post by coxsy »

nice to see someone other than nuts doing the welding after the bullbar went flying, :D
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

coxsy wrote:nice to see someone other than nuts doing the welding after the bullbar went flying, :D

nearly got them finnished and
wel i just about cut me hand off lmao . just got 11 stiches in the back of me hand bloody grinder jamed and jumped onto the back of my left hand so bar wrk will hav 2 wait till thursday now :lol: :lol: :lol: :lol:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

oh and i am doing allot of the welding coxy uhu glue is awsome stuff :lol: :lol: :lol:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Re: Terrano filly

Post by kiwipete »

Bloody hell Nuts, you're determined to kill yourself, aint you?
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: Terrano filly

Post by coxsy »

he seems to keep on trying to kill himself :D
keep breathing for another year or so nuts huh :D
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Terrano filly

Post by Jerry »

do you want me to bring down a box of plasters :roll:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
nuts
Hard Yaka
Posts: 645
Joined: Wed Jul 19, 2006 12:00 pm
Location: somewhere arround westcoast offroading usually

Re: Terrano filly

Post by nuts »

Jerry wrote:do you want me to bring down a box of plasters :roll:


na im alergic to all plasters :mrgreen:
blood bars are looking awsome and helll ya cant kill nutters just make us crazier :lol: :lol: :lol:
people think i have a problem with insanity .... i dont i enjoy every minute ..... 0278900597
User avatar
hillfilly
Driving Ms Daisy
Posts: 343
Joined: Wed Mar 14, 2007 12:00 pm
Location: Northern Buller

Re: Terrano filly

Post by hillfilly »

coxsy wrote:he seems to keep on trying to kill himself :D
keep breathing for another year or so nuts huh :D


I am beginning to think nuts and working on my truck are a lethal combination........ :roll: :roll: :roll:
Not what if, but why not
User avatar
Smurf
Hard Yaka
Posts: 2867
Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson

Re: Terrano filly

Post by Smurf »

Jerry wrote:do you want me to bring down a straight jacket :roll:



YEP :shock:
Post Reply

Return to “Projects / Mod's”