1st/2nd May

Post what you achieved in the weekend.
Include the date of the weekend eg 25/02/2006
Thanks to Turoa for a great forum idea!
User avatar
mike
Last minute Mike
Posts: 3545
Joined: Fri Dec 06, 2002 12:00 pm
Location: Christchurch - The place I'd like to be

1st/2nd May

Post by mike »

thought I'd start this one off early.

In prep for the weekend I spent 5 hours in the garage last night :twisted: Rebuilt the startor motor, started the old girl which was an instant motivation booster to say the least especially hearing the 8 sing into life :mrgreen: Did the battery bracket and then wired in the winch. Wired in the fans but need a solinoid for those and some more wire.

Wheres the best place to get lots of cheap wire and solinoids?
1973 SWB Land Rover V8 Hybrid
1994 Toyota Surf
phraza
Hard Yaka
Posts: 898
Joined: Thu Oct 15, 2009 8:44 am
Location: North Shore, Auckland
Contact:

Re: 1st/2nd May

Post by phraza »

Jaycar maybe? Not sure if you have one down there
2WD 06 Hilux... for now
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: 1st/2nd May

Post by SV1K »

mike wrote:Wheres the best place to get lots of cheap wire and solinoids?

My garage :mrgreen: I have a couple of 12v ones that are no good for me.....
8)
User avatar
rangimotors
Hard Yaka
Posts: 1631
Joined: Thu May 10, 2007 12:00 pm
Location: chch

Re: 1st/2nd May

Post by rangimotors »

just packing up to head to southland for duckshooting :D

pretty wet down that way so could be interesting.
Never argue with an idiot, they drag you down to their level then beat you with experiance!
User avatar
NJV6
Hard Yaka
Posts: 2751
Joined: Mon Nov 15, 2004 12:00 pm
Location: Southland

Re: 1st/2nd May

Post by NJV6 »

rangimotors wrote:just packing up to head to southland for duckshooting :D

pretty wet down that way so could be interesting.


:lol: :lol: Most maimai's are either still underwater or now out at sea!!!

Not to mentions there are now 20x the number of ponds....

And the ships in the harbour have an alert out to watch for baleage floating in the water... Unfortunately this was alot of winter feed for us :cry:
SWB V6 Paj with one or two mods ;)
User avatar
Heath
Hard Yaka
Posts: 3297
Joined: Thu Dec 12, 2002 12:00 pm
Location: Rolleston, Chch

Re: 1st/2nd May

Post by Heath »

NJV6 wrote:
rangimotors wrote:just packing up to head to southland for duckshooting :D

pretty wet down that way so could be interesting.


:lol: :lol: Most maimai's are either still underwater or now out at sea!!!

Not to mentions there are now 20x the number of ponds....

And the ships in the harbour have an alert out to watch for baleage floating in the water... Unfortunately this was alot of winter feed for us :cry:


Farmers eh! Moan there is no water and then they moan there is too much... :wink:

Kidding mate hope it all pans out. Hope the theiving bastards selling feed dont do what they did to my folks in Taupo (hay went up 400%), when there was a shortage there. I hope they get their rain in a more "controlled" fashion then you guys.
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: 1st/2nd May

Post by skid »

went for a quick drive this evening...........

http://www.offroadexpress.co.nz/Forums/ ... 27&t=21016

:x :x :x :x :x


got a 4wd meeting to go to tomorrow if the weather is shite, otherwise I'm gonna smash a little white ball round grass

sunday seems to be the day I should really look into all my boxes from when I moved a month or so ago and find out where everything is seeing as how a few folks want to borrow things and get thier own stuff back :roll: :roll: :roll:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: 1st/2nd May

Post by lincooln »

Just changed over to the muds and got all packed up and redid the intake pipe on the zuk. Now its all ready for tomorrow. :)
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
Taz
Hard Yaka
Posts: 1330
Joined: Mon Apr 16, 2007 12:00 pm
Location: Queenstown
Contact:

Re: 1st/2nd May

Post by Taz »

Well, I have been putting off changing my oil as I was worried about getting a few drips on the new concrete driveway. This morning I decided that I had better full finger and just do it and I'd just put an old cover down incase a little got away on me.
















Needed a bigger cover.































Image

Turns out the 20L bucket I grabbed had a sneaky crack in the bottom. I pulled the bung and went and put the kettle on. Came back a few mins later to that :lol: :lol: :lol:

Hose doesn't reach that part of the house either :lol: :lol: :lol:

At least degreaser is on special. Farkin cracked me up though. No need to worry about bloody drips anymore.
"Anyone who lives within their means suffers from a lack of imagination." - Oscar Wilde
Work in progress - www.pearls.kiwi
User avatar
Smurf
Hard Yaka
Posts: 2867
Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson

Re: 1st/2nd May

Post by Smurf »

Taz wrote:Well, I have been putting off changing my oil as I was worried about getting a few drips on the new concrete driveway. This morning I decided that I had better full finger and just do it and I'd just put an old cover down incase a little got away on me.................
At least degreaser is on special. Farkin cracked me up though. No need to worry about bloody drips anymore.


Christened!! :D Bugger
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: 1st/2nd May

Post by sibainmud »

lincooln wrote:Just changed over to the muds and got all packed up and redid the intake pipe on the zuk. Now its all ready for tomorrow. :)


Don't forget to pack ya lights too. Will be good in the dark :!:
I'm just hoping my diff locks in. Last trip for a while, got to catch up on the chores i been putting off. The hassles of 4wdin' every weekend for the last month. At least tomorrow an't gunna be about truck preservation.....cv's about ready to blow....makin horrid noises on Thompsons last weekend. All good, as i haven't put a spanner near it for months. :twisted: :twisted:

Cheers.
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Landcruiser70
Bush Crasher
Posts: 63
Joined: Mon Jul 20, 2009 5:58 pm
Location: Rotorua (or elsewhere towing Nissans)

Re: 1st/2nd May

Post by Landcruiser70 »

Picked up another surf tonight to chuck the body on the v8.
Duckshooting tomorrow.
Work on the Hilux Sunday.
1993 Landcruiser Prado LJ78: 4" lift, Tough Dog sus, 35" BFG muds, ARB air locker, LSD
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: 1st/2nd May

Post by lincooln »

sibainmud wrote:
lincooln wrote:Just changed over to the muds and got all packed up and redid the intake pipe on the zuk. Now its all ready for tomorrow. :)


Don't forget to pack ya lights too. Will be good in the dark :!:
I'm just hoping my diff locks in. Last trip for a while, got to catch up on the chores i been putting off. The hassles of 4wdin' every weekend for the last month. At least tomorrow an't gunna be about truck preservation.....cv's about ready to blow....makin horrid noises on Thompsons last weekend. All good, as i haven't put a spanner near it for months. :twisted: :twisted:

Cheers.



Yea I got new battery for my torch and well thats it really. Just got my head lights and my brother to help navigate. :lol: :lol:

Not that that is any help.

SO you got spare cv's to put in at dinner then?

cheers
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: 1st/2nd May

Post by sibainmud »

lincooln wrote:
sibainmud wrote:
lincooln wrote:Just changed over to the muds and got all packed up and redid the intake pipe on the zuk. Now its all ready for tomorrow. :)


Don't forget to pack ya lights too. Will be good in the dark :!:
I'm just hoping my diff locks in. Last trip for a while, got to catch up on the chores i been putting off. The hassles of 4wdin' every weekend for the last month. At least tomorrow an't gunna be about truck preservation.....cv's about ready to blow....makin horrid noises on Thompsons last weekend. All good, as i haven't put a spanner near it for months. :twisted: :twisted:

Cheers.



Yea I got new battery for my torch and well thats it really. Just got my head lights and my brother to help navigate. :lol: :lol:

Not that that is any help.

SO you got spare cv's to put in at dinner then?

cheers


:lol: :lol: :lol: :lol: :lol:
I'll go round there in 2wd first! might be more fun :!: :!: :?: :?:
I was thinkin of not even packing the tools.
After all it an't far away from my workshop.
Haven't even washed truck since Thompsons....poor girl, suffering from neglect :!: :?:
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: 1st/2nd May

Post by lincooln »

Yea it does look a bit unloved compared to when you first bought it :twisted: :lol:

Well its meant to shower tomorrow :twisted: , fingers crossed. But I will believe it when I see it.
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: 1st/2nd May

Post by sibainmud »

lincooln wrote:Yea it does look a bit unloved compared to when you first bought it :twisted: :lol:

Well its meant to shower tomorrow :twisted: , fingers crossed. But I will believe it when I see it.

I love my truck.........
It just a bit crinckled now....that's all. Well it an't got a straight panel left except for the bonnet. Seems a shame to cut a hole in it for the intercooler. Thanks to all the trees that have kept me the right way up :!: :!: :lol: :lol:
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: 1st/2nd May

Post by lincooln »

Well see you out there Simon, what time you looking at arriving there?

Have a good weekend all
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
sprey
Hard Yaka
Posts: 156
Joined: Mon Jan 05, 2009 10:13 pm
Location: Wellington
Contact:

Re: 1st/2nd May

Post by sprey »

sold my Isuzu Vehicross and brought a Alfa Romeo 2nyt as the daily driver, now saving some cash to buy a 4x4 that i can actualy get marked up :lol: 8)
User avatar
damon
Bush Crasher
Posts: 59
Joined: Fri Apr 16, 2010 6:15 pm
Location: geraldine

Re: 1st/2nd May

Post by damon »

went for a drive up my favorite hunting spot 10 oclock last night bit wet only made it half way up the narrow track its pretty steep just as well there was a turn around 100mt back fun ride back down drove the road for a pig dogs havn a bit of a sniff be back this arvo for another crack
User avatar
mudslut
Hard Yaka
Posts: 221
Joined: Tue Mar 17, 2009 9:09 pm
Location: Hamilton

Re: 1st/2nd May

Post by mudslut »

Yesterday i got the vining and the certing finalised on my samurai so its now got the warrent sticker on the windscreen and the low volume cert plate on the fire wall im so stoked.Today i mounted my warn 8274
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

Re: 1st/2nd May

Post by meece4x4 »

Image

Had a good look over the new toy today, confirmed that it has rear LSD and the PTO winch worked, (Mrs wouldnt let me hook it up to the car in front at the auctions to test it :lol: ) took the Muds off the Bighorn and tried the rims on the whale, lol big offset difference so off to the tyre shop to get them swapped over once the Savero's have had it.

spent today fitting front tow hooks, fire ext and other club required stuff, just have to make up a bracket to replace the factory U tow hook with a rated one.
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
User avatar
sig
Jeep Jeep
Posts: 1487
Joined: Thu Oct 06, 2005 12:00 pm
Location: stokes vegas

Re: 1st/2nd May

Post by sig »

been pretty slack lately.finally managed to pick up my new(to me) LJ71 prado for my next project .hopefully tomorrow work on the 80 and replace the rear discs,shoes and pads plus remove the extended drop box off the rear panhard ready for the next warrant.HOPEFULLY .Then head over to the nui to pick up my boy and his scout mates from the rimutaka forest park after their tramp into the orongorongos ,with a stop into CHROMES cave to have a bit of a chinwag.then think about the 40 so i can get it ready for its yearly queens birthday trip to dave hintzs farm in taihape to throw a bit(okay a lot) of mud and have another go at his possum problem
FJ40,INJECTED SB 406 CHEV, LOCKER,35 SIMEXS,warn winch , 80seies vx 4.2 24v turbo diesel ,fr and rear lockers 3" exh top mount intercooler, 021 724482
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: 1st/2nd May

Post by skid »

sig wrote:.hopefully tomorrow work on the 80 and replace the rear discs,shoes and pads plus



if you manage to pull this off and adjust your handbrake up easy enough

you may well have a job on your hands

clear the driveway dude
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 1st/2nd May

Post by wopass »

mudslut wrote:Yesterday i got the vining and the certing finalised on my samurai so its now got the warrent sticker on the windscreen and the low volume cert plate on the fire wall im so stoked.Today i mounted my warn 8274


pictures or it never happened :lol:
If you already know everything, DON'T ask bloody questions!!
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: 1st/2nd May

Post by lincooln »

Went on the day/night run to Woodhill. Had an awesome time and still didn't break anything. Thats now 10+ runs and 20+ trips on the farm for the auto hubs and they are still perfectly quiet. :D

Cheers
Lincoln
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: 1st/2nd May

Post by sibainmud »

sibainmud wrote:
sibainmud wrote:
lincooln wrote:
Don't forget to pack ya lights too. Will be good in the dark :!:
I'm just hoping my diff locks in. Last trip for a while, got to catch up on the chores i been putting off. The hassles of 4wdin' every weekend for the last month. At least tomorrow an't gunna be about truck preservation.....cv's about ready to blow....makin horrid noises on Thompsons last weekend. All good, as i haven't put a spanner near it for months. :twisted: :twisted:

Cheers.



Yea I got new battery for my torch and well thats it really. Just got my head lights and my brother to help navigate. :lol: :lol:

Not that that is any help.

SO you got spare cv's to put in at dinner then?

cheers


:lol: :lol: :lol: :lol: :lol:
I'll go round there in 2wd first! might be more fun :!: :!: :?: :?:
I was thinkin of not even packing the tools.
After all it an't far away from my workshop.
Haven't even washed truck since Thompsons....poor girl, suffering from neglect :!: :?:


Well I jinks myself.....cv's still good, but broke second front diff. Spent most of the afternoon and all night rocking around in 2wd :roll: :roll:

Parked on a tree stump at 10kmh and bent gearbox cross member and moved engine and gearbox back about 2 inchs. Bugger :!: :!: :( :(

Image
Image

Oh well got some serious repairs to do now :!: :!:
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: 1st/2nd May

Post by skid »

Night drives are cool

Image

Image

Image

Image

Image

Image
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
Taz
Hard Yaka
Posts: 1330
Joined: Mon Apr 16, 2007 12:00 pm
Location: Queenstown
Contact:

Re: 1st/2nd May

Post by Taz »

meece4x4 wrote:just have to make up a bracket to replace the factory U tow hook with a rated one.


Check the patrol forum about that. Needs a bit of strengthenin apparently. I'm still getting away with a tow hook tounge, but I'm pulling it off soon so will do one on each chassis rail and a drop tounge (when needed) from that loop spot. ;) Tow bar is HARD to bend, but not impossible.

Good buy btw. LWB is mad handy. You will sleep 4 in the back easy, if they are also easy.

Smurf wrote:Christened!! :D Bugger


The Landrover christened the other side a week ago so its progress I guess! Degreaser has damaged the surface and the house is on the market in 2 weeks so who cares. Rubber matts cure all :lol:
"Anyone who lives within their means suffers from a lack of imagination." - Oscar Wilde
Work in progress - www.pearls.kiwi
User avatar
meece4x4
Hard Yaka
Posts: 513
Joined: Sun May 27, 2007 12:00 pm
Location: Ohangi, Taranaki

Re: 1st/2nd May

Post by meece4x4 »

Taz wrote:
Check the patrol forum about that. Needs a bit of strengthenin apparently. I'm still getting away with a tow hook tounge, but I'm pulling it off soon so will do one on each chassis rail and a drop tounge (when needed) from that loop spot. ;) Tow bar is HARD to bend, but not impossible.




cheers for that Taz ... thought as much, might just resort to a shackle though the towbar mount for now which our club apparently accepts as a rated tow hook.


Good buy btw. LWB is mad handy. You will sleep 4 in the back easy, if they are also easy.


Yeah always loved the whales just couldn't justify the $6500-8500 price the older ones are still going for, saw this one come up at turners with a $3500-$4500 estimate and thought what the hell, got it for just over $4000 so am pretty happy, even the passenger window and sunroof works! :) pretty tidy for age (1988) and K's (234 000) cant find any signs of rust apart from a little surface rust in the sunroof and the only mechanical issue I can find is the slave cylinder needs replacing and the clutch needs bleeding (apparently a common and b*tch of a job in GQ's) so changing gears requires a little pause and a double clutch to get in first and second .. no biggie at the moment , reminds me of driving my father-in-laws old TK Bedford :lol: :mrgreen:
llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 1st/2nd May

Post by coxsy »

whenmy slave cyl died, brought two cheap enough, carry a spare now, that rear hook thing is to weak to mount a hook there, the rear x member on mine has 6mm bent outward in it,oh
crawl under ye truck and grease up the pto cable now to stop water and mud getting in,
my weekends work so far

,Image
Image
Image
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
Post Reply

Return to “This weekends achievements”