Jammed up gearbox in my series LR

[Nizsafari]

Hey all.

One minute i had gears now nothing, the leaver wont select anything for some reason. Ive tried gentle persuasion and harsh words but nothing apart from a slightly bent gear lever now... is this a common fault??

[Jerry]

Have you tried a larger hammer on teh leaver, does the 4wd leaver work as well?

[Nizsafari]

Have you tried a larger hammer on teh leaver, does the 4wd leaver work as well?

The transfer case levers work fine.. just the gear lever, it moves freely in neutral, just wont select any of the gears

[Lynx]

With motor running? or Off?

Cheers Daniel

[Jerry]

fluid clutch? is there a slave cly leak?, does it need a bleed?, is there any adjustment on gearbox thingy?

[turoa]

Take the shifter off and see if you can move the shift rods manually

[Nizsafari]

With motor running? or Off?

Cheers Daniel

Both... wont do it on or off

[Nizsafari]

fluid clutch? is there a slave cly leak?, does it need a bleed?, is there any adjustment on gearbox thingy?

One min it was good, next it wasnt....pass, pass, do you need to bleed?? , pass..

[Nizsafari]

Take the shifter off and see if you can move the shift rods manually

Does the shifter pop out oris it a pull the sucker to buts kinda job??

[turoa]

Take the shifter off and see if you can move the shift rods manually

Does the shifter pop out oris it a pull the sucker to buts kinda job??

Na its easy as. Its like 4 bolts and the shifter comes off. The shift rods are external so you can see em. Then just play around with them and see if they move.

[Nizsafari]

Take the shifter off and see if you can move the shift rods manually

Does the shifter pop out oris it a pull the sucker to buts kinda job??

Na its easy as. Its like 4 bolts and the shifter comes off. The shift rods are external so you can see em. Then just play around with them and see if they move.

Sweet, Cheers Tu's.. I'll have a looksee tomorrow....
b.t.w.. made up a sweet throttle setup..apart form fixing a couple of vacuum hoses, the motor runs sweet

[Nizsafari]

Take the shifter off and see if you can move the shift rods manually

took the shifter off... the rods were quite stiff, gave them a light tap, put the shifter back on and all good!!, gave the rods a light grease...sweet...

Cheers Tu's