Toyota High pinion ratios

[Engineer]

Gday!
Can someone please tell me what ratios 8" high pinion diffs come in. I have 4.8's, just curios if they come in 4.1, 4.3 or 4.5
Much appreciated

Ryan.

[turoa]

80 series have 4.1 high pinion front

[wopass]

some of the prado's had the 4.3 hi pin front diff to

[sig]

some 80s come with 3.7 as well

[Bulletproof]

I run a NZ new 70 series cruiser with 4.55

Cheers Richard

[Engineer]

im picking an 80 series head wouldnt bolt into my 70 series/ hilux axles tho?

Thanks guys

[sig]

front should ( i think)

[Engineer]

front should ( i think)

that would be handy!
anyone got a 4.1 high pinion they wanna part with?

[kbushnz]

Hi Yah
If you have no luck finding one in NZ.
Here is a great place to buy in USA.
http://www.justdifferentials.com
I purchased a rear 4.88 for my E locker from them.
Only took 4 days to get here and was 1/2 the price of a local one.
I have the KZJ78 landcrusier Prado (square one).
8 inch diffs, V6 / Diesel style.
Reverse cut ring and pinion in front diff...

Calvin

[Andrew1706]

Are non 80series hi pinions the same as 80 series hi pinions? Including the whole diffhead and the R&P

[kbushnz]

Hi Yah
I think there is only two models of 80 series Cruisers which have an 8 inch hi pinion diff in the front.

90-97 Landcruiser (FJ-80 and FZJ-80) uses a high pinion, reverse-cut front diff.

This is from http://home.4x4wire.com/erik/diffs/ web page and other google searches point to the same info.

I have never viewed one in the flesh and can't vouch if it would fit a Hi Lux or Square Prado...
But there are articles where people have fitted an 80 series front "e" lockers into Tundra / tacoma's in the states. Much the same as the Hi Lux....

Hope this helps

Calvin