Strengthening tie-rods

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
minefield
Hard Yaka
Posts: 262
Joined: Fri May 26, 2006 12:00 pm
Location: Christchurch

Strengthening tie-rods

Post by minefield »




I am trieing out a Terrano ,,2 trips 2 bent tie rods ,,
Is there any other tie rod with the same taper but stronger that can be made to fit ? While the Terrano was going , the deeper the mud the better it went
did not like rocky hill climbs though. :?
Nissan Safari SWB Auto ,50mm suspension Lift , 50mm body lift, 12000lbs winch,
33x12.5x15 Perilli scorpion muds
User avatar
albundy
Rolly Polly
Posts: 2631
Joined: Tue Sep 07, 2004 12:00 pm
Location: Lismore, NSW, Australia

Post by albundy »

Minefield what are you doing with your truck :?: I have only bent one tierod in three years and I treat her like shit some days, have broken cv's to prove it. I run a v6 widebody and I know they are bigger then the standard ones and also deisel ones. What year is your truck, petrol or diesel? What size tyres are you running?
Al
rain, hail, sleet or snow, we go!
minefield
Hard Yaka
Posts: 262
Joined: Fri May 26, 2006 12:00 pm
Location: Christchurch

tie rods

Post by minefield »

I used to have a 86 patrolswb 3.3 turbo but the rust took over,
I decieded to try the Terrano, I have done 5 trips so far the last was the Bleinheim annual hard yakka trip 4 cruisers blew cv's includeing a dd hilux one swb patrol on its side ,Gives you a idear what the trip was like!
I blew a cv and bent 2 tie rods it was a great day,tough just how I like it .
my old patrol no problems,
I am begining to wonder if the Terrano will stand up to the type of 4wding I enjoy I have been doing this for 25 years and I ant going to stop now, having to much fun
:D
I think if I can strenghin the tie rods and tone down my stile of driving I mite be ok. by the way its a 2.7 turbo auto with 32x10.5 moungrel tyres :)
Nissan Safari SWB Auto ,50mm suspension Lift , 50mm body lift, 12000lbs winch,
33x12.5x15 Perilli scorpion muds
User avatar
SupraLux
Complete Bastard
Posts: 2415
Joined: Tue Dec 10, 2002 12:00 pm

Post by SupraLux »

Might I possibly suggest something that will solve your problem?...



|
|
|
|
\/

(Many of you know whats down here)



|
|
|
|
\/







|
|
|
|
\/



SAS IT! :D


Just my opinion :P

Steve
minefield
Hard Yaka
Posts: 262
Joined: Fri May 26, 2006 12:00 pm
Location: Christchurch

Tie rods

Post by minefield »

Reading the back side of that reply you must drive a L/cruiser?
Nissan Safari SWB Auto ,50mm suspension Lift , 50mm body lift, 12000lbs winch,
33x12.5x15 Perilli scorpion muds
User avatar
albundy
Rolly Polly
Posts: 2631
Joined: Tue Sep 07, 2004 12:00 pm
Location: Lismore, NSW, Australia

Post by albundy »

Worse MU. Known to those hiluxy/surfy things too :lol: I do similar trips, now started carrying spares including alternator, cv's and now complete tierods. I was thinking of selling the terrano and going for a patrol but have now decide against it. I love its size, v6 power, onroad handling and I know it inside out :lol: . Sticking with the terrano and doing more mods, the frontend sas is high on the list. Just need the handbrakwe to go back to work.
Al
rain, hail, sleet or snow, we go!
User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Post by mroffroader »

SupraLux wrote:Might I possibly suggest something that will solve your problem?...



|
|
|
|
\/

(Many of you know whats down here)



|
|
|
|
\/







|
|
|
|
\/



SAS IT! :D


Just my opinion :P

Steve


Hahaha lol :twisted: :roll:
80 series tow bus towing a redneck ass vitara :D
minefield
Hard Yaka
Posts: 262
Joined: Fri May 26, 2006 12:00 pm
Location: Christchurch

Tie rods

Post by minefield »

Like you Al, I am starting to enjoy driving the Terrrano I agree not to big and heavy and not to small ,,will be even better with the mods I have planed :D
Nissan Safari SWB Auto ,50mm suspension Lift , 50mm body lift, 12000lbs winch,
33x12.5x15 Perilli scorpion muds
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Re: Tie rods

Post by kiwipete »

minefield wrote:will be even better with the mods I have planed :D


Do tell.........
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
User avatar
JTop
Hard Yaka
Posts: 236
Joined: Mon Jan 09, 2006 12:00 pm

Post by JTop »

I dont agree with every thing Supralux says but
SAS will fix it, just don't let him talk you unto using Cart Springs
J Top
minefield
Hard Yaka
Posts: 262
Joined: Fri May 26, 2006 12:00 pm
Location: Christchurch

Tie rods

Post by minefield »

Al Knows what I have in mind ,If it works I'll no more cv problems and I'll post it with photos :D
Nissan Safari SWB Auto ,50mm suspension Lift , 50mm body lift, 12000lbs winch,
33x12.5x15 Perilli scorpion muds
Leithfield
Hard Yaka
Posts: 576
Joined: Sat Jun 04, 2005 12:00 pm

Post by Leithfield »

minefield wrote:Al Knows what I have in mind ,If it works I'll no more cv problems and I'll post it with photos :D


A Terrano on portals; cant wait to see the photos. Image.
Post Reply

Return to “Tool Shed”