Show us your Toyota

[MNC]

now with 35" creepies on 10" rims

don't stick out as far as I thought they would

but holy crap you gotta hold on tight between 50 - 60kph

would help if the bloody tyre shop had a balancer that was actually bolted to the floor instead of trying to walk off the pallet as we spun them up

Meh. They look rubbish. Think you should just relist them on trademe and I WILL out bid you next time

On the positive side you may meet a new boyfriend with that new look (no I am not upset in anyway that you outbid me on these rims - not in anyway at all - really - as Mr Tui billboard would say).

On the up side I am sure you will get lots of punctures. Best wishes

[Mongoose]

Skid, didn't you have the 33 mudstars on your 80? Did you decide you weren't happy with them or just figure you'd go bigger?

[skid]

Skid, didn't you have the 33 mudstars on your 80? Did you decide you weren't happy with them or just figure you'd go bigger?

yup, mudstars and alloys are just having a rest in the lockup for now

been wanting to try out 35s for a while now, and the opportunity arose, so I did it

happy now, coz they fit piece of piss and shouldn't rub, although have yet to fully articulate

but knowing that they fit, I will be now saving my coin for a set of 35" mudstars when they arrive in the country

[coupekiwi]

Haha.

Anyone got a high ratio open G series diff head for sale?
Under 4.0:1.

Chur

[mfrsr]

93 KZN130. nothing particularly special, except that it only cost me $1500

all i've done so far is strip the usual dressup shit off, chucked on the 32's i had for my Landcruiser, and swapped a diff into the back.

Need to make up a simple bullbar/hook mount for the back end before it's ready to use. Nice to see that taking the bumper & towbar off the back has fixed the sagging springs

Got a full set of genuine flares, running boards, mudflaps, nudgebar, swaybars and rear bumper here if anyone wants to buy them...


Pic here, it's not letting me use [ img ] tags..
http://www.gpforums.co.nz/attachment.php?s=&postid=7484280

[Jerry]

My Turn



New Truck

Old Truck (Same place)

[andy3542]

My '83 Bj42. Stock other then flared rear wheel arches, spot lights and wheels.

She doesnt get to see the mud, got a landy for that!

Link-
http://s1219.photobucket.com/albums/dd4 ... 3542/Bj42/

Spent 25mins resizing the photos but kept getting told "Your images may only be up to 801 pixels wide."
would appreciate help (first time uploading photos to ore)

[flyingbrick]

very nice!

[Heath]

X2!!!

Good find, looks great.

Might have to find one of those myself for a toy... oneday...

[flyingbrick]

My '83 Bj42. Stock other then flared rear wheel arches, spot lights and wheels.

She doesnt get to see the mud, got a landy for that!

Link-
http://s1219.photobucket.com/albums/dd4 ... 3542/Bj42/

Spent 25mins resizing the photos but kept getting told "Your images may only be up to 801 pixels wide."
would appreciate help (first time uploading photos to ore)

I SAW YOU TODAY.

You were heading north on the southern motorway- had just come over the bombays

Your truck sticks out like a sore thumb. Same color too

[andy3542]

My '83 Bj42. Stock other then flared rear wheel arches, spot lights and wheels.

She doesnt get to see the mud, got a landy for that!

Link-
http://s1219.photobucket.com/albums/dd4 ... 3542/Bj42/

Spent 25mins resizing the photos but kept getting told "Your images may only be up to 801 pixels wide."
would appreciate help (first time uploading photos to ore)

I SAW YOU TODAY.

You were heading north on the southern motorway- had just come over the bombays

Your truck sticks out like a sore thumb. Same color too

Yeah that wouldve been me heading back from Ruapehu. Old girl ran well both ways not a complaint.

[109]

Heres my 2 Toyota's

[mickey88]

heres my beast, well just work hack really but good fun in the mud when i take it there im looking for a snorkel for cheap or just the hat at the mo if any one could help?

[2.f]

hey this is my work in progress fj40
its a 1974 im taking it back to factory condition atm,it has 60 series disc brake conversion upfront,31x16x7.50 dunlop road grippers and a few extra little mods around it

[niblik]

good stuff 2.f...

would be epic imho if ya got rid of rear guard surrounds, made proper shackles out of flat not angle, painted roof white, remove 'truckin' roof lights and didnt overpaint tyres and chassis blue...

put a thread up fella.. chuck a heap of pics up..

lovin teh fawdys..

[2.f]

good stuff 2.f...

would be epic imho if ya got rid of rear guard surrounds,

they came on the truck when i got it and someone has done a bloodly good job of doing them as there is no bog

made proper shackles out of flat not angle, painted roof white, remove 'truckin' roof lights and didnt overpaint tyres and chassis blue...

put a thread up fella.. chuck a heap of pics up..

they where also on the truck i plan to change them in the future,i have to underseal the chassis anyway and i have new tyres so there isnt any paint on them

il try sort that out tomorrow

[antsarooney]

Here is a few photos of my hilux two when i first got it and the other two are what she was like 6 months ago.

http://s738.photobucket.com/albums/xx21/antsarooney/

Since then she has had an engine transplant from 2.4 to a land rover 3.9 v8 still working a few bits out with that and a 50mm body lift all of which still needs cert.
Will get some new photos to.

[antsarooney]

[vvilly]

there fixed it

[antsarooney]

Cheers what did i do wrong?

[vvilly]

Cheers what did i do wrong?

paste your link between the 2 img(link)img not imgimg(link)imgimg

[StreetClique]

My KZN130G Surf

[KIWI_TERRANO]

Mine.... got a build thread going if you want to look/ ask questions



Sas and 35 etc alot of work still to do

[bda4130]

[bda4130]

[skid]

[RJT]

Time for a bit of an update. 3" suspension lift, 33x12.5 Maxxis Bighorns, airflow snorkel, rear lsd. Lately added 2.5" exhaust to help the 2lte breathe a little easier, intercooler to come. Front lockrite. Custom front bar made by 4wd accessories and 12,000lb Iron Man winch (still to wire up). GME TX3100 to fit sometime...

From...



to





Unsure on what intercooler I'll use yet, either subaru water to air or bighorn top mount.

[Sadam_Husain]

nice looking bar RJT, shame the fairlead had to end up on the piss, you need to get some sidebars made up to finish it off... looks good mate

[RJT]

They definately did a great job of it! Not too worried about the fairlead being on that angle, will see how it is when winching though (when I finally get the bloody winch wired up ). Side protection and rear bar are on the list after intercooling. Just want that extra insurance being the 2LTE (3L head though).

[DaveM]

What was the bar worth, if you don't mind me asking?