MK/MQ Rebuild......

Starting a project or modification? Then post it's progress here and show us some pic's.
Post Reply
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by PR »

taz01 wrote: toydrowna

Ha Ha thats what Mike should put under Skids name instead of hard yaka :lol: :lol: :lol: :lol:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: MK/MQ Rebuild......

Post by Jerry »

dont you mean Toybota :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
stinky
House Hubby
Posts: 949
Joined: Wed Nov 30, 2005 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by stinky »

It will be ready and going to Rallywoods on sunday so bring your camera Jerry so you can get photos of it when he cocks it up and finds he did it wrong :lol:
____________________________
Martin
http://www.wtbs.co.nz
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

Jerry wrote:dont you mean Toybota :lol:


why did it float..........
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: MK/MQ Rebuild......

Post by haynzy »

toyotas dont float, I know :lol: :lol: :lol:
taz01 wrote:
Jerry wrote:dont you mean Toybota :lol:


why did it float..........
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

haynzy wrote:toyotas dont float, I know :lol: :lol: :lol:
taz01 wrote:
Jerry wrote:dont you mean Toybota :lol:


why did it float..........


and very little chance of my 3000+kg nissan floating either :shock: :shock:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
stinky
House Hubby
Posts: 949
Joined: Wed Nov 30, 2005 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by stinky »

New version of the Nissan liteweight Its been built to skip across the top of mud holes and float gracefully over boggy ground in fact its so good you wont even see its been there :lol: :lol:
____________________________
Martin
http://www.wtbs.co.nz
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

Well Dragged the pos home today thought Id better get some pics from outside my main sponsor to keep him happy.......

Image
Image
Image
Image
Image

Shake down test tomorrow should be fine I reckon ....... :D
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
sig
Jeep Jeep
Posts: 1487
Joined: Thu Oct 06, 2005 12:00 pm
Location: stokes vegas

Re: MK/MQ Rebuild......

Post by sig »

popped around the lockup before and no one there ,now i can see why.its almost looking like a proper wagon now :lol: :lol: :lol:
FJ40,INJECTED SB 406 CHEV, LOCKER,35 SIMEXS,warn winch , 80seies vx 4.2 24v turbo diesel ,fr and rear lockers 3" exh top mount intercooler, 021 724482
greek_style
Hard Yaka
Posts: 181
Joined: Tue Jun 09, 2009 11:33 am
Location: petone wellington

Re: MK/MQ Rebuild......

Post by greek_style »

damn its looking good nice work :)
User avatar
stinky
House Hubby
Posts: 949
Joined: Wed Nov 30, 2005 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by stinky »

Fark that looks good everyone should go there to get work done I know i will :lol:
____________________________
Martin
http://www.wtbs.co.nz
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: MK/MQ Rebuild......

Post by skid »

righto, time to pick on it

if you fall over or up against a bank, the bars on the front guards will bend in and dent the guards

seen it before, needs extra brace across front like a bullbar

skids 2c
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

So how did it go.....???????? It go well or ??????????......... :mrgreen:
Don't have 4wd.
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: MK/MQ Rebuild......

Post by SV1K »

It leaks water but other than that it went ok for what he did....
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: MK/MQ Rebuild......

Post by niblik »

the rear radiator right behind the cab get enough air flow at upper speeds?
ImageImage
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: MK/MQ Rebuild......

Post by SV1K »

naaa split water pipe nothing major really.... :lol: :lol: :lol:

Forgot to mention the slow leak in the tyre... that ended up going down very fast!
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: MK/MQ Rebuild......

Post by abbo »

suzuki1k wrote:It leaks water but other than that it went ok for what he did....

He will be happy with that then......hope it goes well for the long weekend......Dont think i will see it going that weekend.....
Don't have 4wd.
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

I must admit it went alot better than i thought it would I almost idled everywhere including imagination/dreamer ....thats going to change if the rain sticks around for QB weekend :lol: :lol:
minor issue with slit water hose one i didnt replace :oops:
and tube letting the air out :shock: thank god for onboard air huh?

niblik wrote:the rear radiator right behind the cab get enough air flow at upper speeds?

yeah temp is fine as long as i remember to switch the fan on takes a while to heat up due to engine waterpump and 110L p/m electric pump
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

mmmmm new tread my first ever brand new set of muds........oh 37x12.5x15

Image
Image
Image
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

Had a steering issue (no not the loose nut behind the wheel) turn out somehow a u-bolt holding springs to diff went walkies so replaced that, replaced bent broken doors, rewired alt but for some reason now lost minor things like lights, temp, oil,fuel gauges heater fan rev counter ...........think i may have disconnected power to fuses will try again tomorrow

oh yeah drives nice now no death shake :lol: :lol:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
Bubba
Hard Yaka
Posts: 1742
Joined: Mon Jul 05, 2004 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by Bubba »

Still looks like a Towtruck 8)
Beer is proof that God loves us and wants us to be happy.
Benjamin Franklin
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

Bubba wrote:Still looks like a Towtruck 8)


and very good at it.......... :lol: :lol:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
Bubba
Hard Yaka
Posts: 1742
Joined: Mon Jul 05, 2004 12:00 pm
Location: Wellington

Re: MK/MQ Rebuild......

Post by Bubba »

I knew i seen your truck before.

It starred in the 80's movie "every which way but loose"!!

About a dodgy towtruck driver that stole cars and drank beer all day and drove around all day with a ape beside him


Image
Beer is proof that God loves us and wants us to be happy.
Benjamin Franklin
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

After last trip with palmy army i lost 4wd presumed it was the hubs so had flanges made only to find still no 4wd so hoped it would be cv ............nope wrong again, pulled the bung on diff and clunk ohhh thats bad rip the diff out and Image
Image
Image

just as well i have spare head and new lokka pins on their way......
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
Fakey
Hard Yaka
Posts: 1159
Joined: Mon Sep 21, 2009 8:48 pm
Location: Townsville Nth QLD

Re: MK/MQ Rebuild......

Post by Fakey »

Shit..Looks like the lokkas not too keen on the creepys :lol: . Got any piks of the flanges you had made up?
Didn't barbie drive a jeep??
User avatar
Moriarty
Hard Yaka
Posts: 1205
Joined: Wed May 31, 2006 12:00 pm
Location: The newly formed Nation of OKATO

Re: MK/MQ Rebuild......

Post by Moriarty »

Bubba wrote:I knew i seen your truck before.

It starred in the 80's movie "every which way but loose"!!

About a dodgy towtruck driver that stole cars and drank beer all day and drove around all day with a ape beside him


Image


Taz looks NOTHING like Clit Eastwood OR Sondra Locke. This leaves only one other choice. Bubba, that's MEAN!!!!
User avatar
chrome
Hard Yaka
Posts: 946
Joined: Wed Jul 20, 2005 12:00 pm
Location: the swamp

Re: MK/MQ Rebuild......

Post by chrome »

moriarty wrote:Taz looks NOTHING like Clit Eastwood OR Sondra Locke. This leaves only one other choice. Bubba, that's MEAN!!!!


har har Clit eastwood
DIRTY OLD HILUX
022 519 7700
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: MK/MQ Rebuild......

Post by taz01 »

oh yeah abbo spotted a few teeth missing on pinion too so guess its replace the whole front end now.....buggar!!!!!!
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
Jafa
Hard Yaka
Posts: 1307
Joined: Mon Nov 01, 2004 12:00 pm
Location: Katikati

Re: MK/MQ Rebuild......

Post by Jafa »

Moriarty wrote:Taz looks NOTHING like Clit Eastwood OR Sondra Locke. This leaves only one other choice. Bubba, that's MEAN!!!!


and the orangutan has all its fingers! :lol: :mrgreen:
sorry Taz, lets get back on topic :)
'85 Hilux crawler, 3rz, duals, 4.7's, 4.88's, ARB's, 30 spline Longfields, 6 stud SNR4x4 Histeer, Airshocks up front, coiled rear, 40" Iroks.
^^^this shite is all about to change....^^^

021 273 9942
jafa@inspire.net.nz
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: MK/MQ Rebuild......

Post by SV1K »

taz01 wrote:oh yeah spotted a few teeth missing .....buggar!!!!!!

:lol: :lol: :lol: :lol: :lol: That is not the only thing with a few teeth missing :lol: :lol: :lol: :lol: :lol: :lol:

8)
Post Reply

Return to “Projects / Mod's”