F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
As title says. We think it is 10,000 but could be 12,000lbs
I'm listing on behalf of a college.
I rebuilt this winch a couple of years ago and has been sitting in the shed since.
It has both 12 and 24 volt motors and solenoid packs for it and assorted battery cables + the remote.
The drum is FULL of ether 5/16 or 3/8 (fairly sure 3/8) spectra rope, (Marine equivalent to amsteel) and not sure how much is there, but must be over 50m but can measure it to make sure.
The only fault is, one of the rods between two halves has broken the ears off both end housings.
Sorry guys, no pics yet.
Only selling on here, but can get a listing on TM going if the right $$ have been offered.
All reasonable offers considered.
I can make a mission out of it, go have a good look and take some pics to show keen punters. Pick up ether North Shore or North West Auckland.
Post here or PM me.
Cheers,
Simon.
I'm listing on behalf of a college.
I rebuilt this winch a couple of years ago and has been sitting in the shed since.
It has both 12 and 24 volt motors and solenoid packs for it and assorted battery cables + the remote.
The drum is FULL of ether 5/16 or 3/8 (fairly sure 3/8) spectra rope, (Marine equivalent to amsteel) and not sure how much is there, but must be over 50m but can measure it to make sure.
The only fault is, one of the rods between two halves has broken the ears off both end housings.
Sorry guys, no pics yet.
Only selling on here, but can get a listing on TM going if the right $$ have been offered.
All reasonable offers considered.
I can make a mission out of it, go have a good look and take some pics to show keen punters. Pick up ether North Shore or North West Auckland.
Post here or PM me.
Cheers,
Simon.
I keep looking for the loose nut behind the wheel, but I can't find it!!
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
Bump
I keep looking for the loose nut behind the wheel, but I can't find it!!
- flyingbrick
- Hard Yaka
- Posts: 1725
- Joined: Sun Jan 18, 2009 7:36 pm
- Location: Hamilton/Auckland
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
how much for one of the motors (whichever one is cheaper)
phone Ross Bolus (secretary of the BOP club) He'll save you.
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
flyingbrick wrote:how much for one of the motors (whichever one is cheaper)
I think it has the 12volt one fitted at the mo, so that leaves the 24volt motor and solinoids spare. I think my mate would like to sell the lot complete. I will E mail him and ask. He was talking $1500 ono, for everything.
Will pm you brick.
P.s. Those BFG's you sold me are mint

I keep looking for the loose nut behind the wheel, but I can't find it!!
- flyingbrick
- Hard Yaka
- Posts: 1725
- Joined: Sun Jan 18, 2009 7:36 pm
- Location: Hamilton/Auckland
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
sibainmud wrote:P.s. Those BFG's you sold me are mint
lacked diff clearance on the safari with them

phone Ross Bolus (secretary of the BOP club) He'll save you.
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
They have done a few road trips, and a beach run up to the "bombing range". Good solid A/T's. Got wof with them mounted to different rims. Sold the rims they were on for $80 to mostr
Amazing how things go around.

Amazing how things go around.
I keep looking for the loose nut behind the wheel, but I can't find it!!
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma





I will delete these pics when it is sold.
Hey, Brick, still no answer yet. Will keep you posted.
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
- its_that_guy2
- Hard Yaka
- Posts: 208
- Joined: Wed Jun 17, 2009 7:51 am
- Location: hanmer springs
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
I would be interested in a price for the 24 volt set up so if needed could separate the 12v stuff for whoever it was that mentioned before
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
its_that_guy2 wrote:I would be interested in a price for the 24 volt set up so if needed could separate the 12v stuff for whoever it was that mentioned before
It's all still together at this stage. I'm heading up there this week some time, so I can talk turkey with my mate and see what kinda deal I can do with him.
It wouldn't suprise me if it was on Trade Me by now too.
I keep looking for the loose nut behind the wheel, but I can't find it!!
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
OK. Had a chat with my mate today.
Winch, rope, hook, remote, 12 or 24 volt, including the galv base it is on, $1250 ono. Left over motor (12 or 24 volt), solenoids, $250 ono. The motor won't be sold til the rest of the unit is.
This the best I can grind out. PM, post or txt/call me if keen.
Simon 021 742228
Cheers,
Winch, rope, hook, remote, 12 or 24 volt, including the galv base it is on, $1250 ono. Left over motor (12 or 24 volt), solenoids, $250 ono. The motor won't be sold til the rest of the unit is.
This the best I can grind out. PM, post or txt/call me if keen.
Simon 021 742228
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
- flyingbrick
- Hard Yaka
- Posts: 1725
- Joined: Sun Jan 18, 2009 7:36 pm
- Location: Hamilton/Auckland
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
hey dude.
Trying to constructive here-
He'll not sell it for that price from what I've seen on trademe- especially since its broken.
-Nathan
Trying to constructive here-

He'll not sell it for that price from what I've seen on trademe- especially since its broken.
-Nathan
phone Ross Bolus (secretary of the BOP club) He'll save you.
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
I agree. I'm just trying to be a middle man. Make an offer then.
It's only worth what someone will pay
I guess that is what the ono stands for
Cheers,
It's only worth what someone will pay

I guess that is what the ono stands for

Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
just missed your auction for this winch on TM, if it dosent sell i have a set of almost new 31/10.5/15 maxxis m/t's im willing to trade if your keen? Cheers
Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma
No trades thanks.
By the way this listing was "on behalf".
Cheers,
By the way this listing was "on behalf".
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!