F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Selling, info, or parts wanted. Anything about parts goes in here.
Post Reply
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

As title says. We think it is 10,000 but could be 12,000lbs
I'm listing on behalf of a college.
I rebuilt this winch a couple of years ago and has been sitting in the shed since.
It has both 12 and 24 volt motors and solenoid packs for it and assorted battery cables + the remote.
The drum is FULL of ether 5/16 or 3/8 (fairly sure 3/8) spectra rope, (Marine equivalent to amsteel) and not sure how much is there, but must be over 50m but can measure it to make sure.
The only fault is, one of the rods between two halves has broken the ears off both end housings.
Sorry guys, no pics yet.
Only selling on here, but can get a listing on TM going if the right $$ have been offered.
All reasonable offers considered.
I can make a mission out of it, go have a good look and take some pics to show keen punters. Pick up ether North Shore or North West Auckland.
Post here or PM me.

Cheers,
Simon.
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

Bump
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by flyingbrick »

how much for one of the motors (whichever one is cheaper)
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

flyingbrick wrote:how much for one of the motors (whichever one is cheaper)


I think it has the 12volt one fitted at the mo, so that leaves the 24volt motor and solinoids spare. I think my mate would like to sell the lot complete. I will E mail him and ask. He was talking $1500 ono, for everything.
Will pm you brick.
P.s. Those BFG's you sold me are mint :mrgreen:
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by flyingbrick »

sibainmud wrote:P.s. Those BFG's you sold me are mint :mrgreen:


lacked diff clearance on the safari with them :D Good to hear you are getting use out of them! What kinda stuff have you used them on? or they just for road use.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

They have done a few road trips, and a beach run up to the "bombing range". Good solid A/T's. Got wof with them mounted to different rims. Sold the rims they were on for $80 to mostr :mrgreen:
Amazing how things go around.
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

Image

Image

Image

Image

Image

I will delete these pics when it is sold.
Hey, Brick, still no answer yet. Will keep you posted.
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
its_that_guy2
Hard Yaka
Posts: 208
Joined: Wed Jun 17, 2009 7:51 am
Location: hanmer springs

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by its_that_guy2 »

I would be interested in a price for the 24 volt set up so if needed could separate the 12v stuff for whoever it was that mentioned before
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

its_that_guy2 wrote:I would be interested in a price for the 24 volt set up so if needed could separate the 12v stuff for whoever it was that mentioned before


It's all still together at this stage. I'm heading up there this week some time, so I can talk turkey with my mate and see what kinda deal I can do with him.
It wouldn't suprise me if it was on Trade Me by now too.
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

OK. Had a chat with my mate today.
Winch, rope, hook, remote, 12 or 24 volt, including the galv base it is on, $1250 ono. Left over motor (12 or 24 volt), solenoids, $250 ono. The motor won't be sold til the rest of the unit is.
This the best I can grind out. PM, post or txt/call me if keen.
Simon 021 742228
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by flyingbrick »

hey dude.

Trying to constructive here- :oops:

He'll not sell it for that price from what I've seen on trademe- especially since its broken.

-Nathan
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

I agree. I'm just trying to be a middle man. Make an offer then.
It's only worth what someone will pay :!:
I guess that is what the ono stands for :wink:
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
mayday
Hard Yaka
Posts: 168
Joined: Mon Nov 24, 2008 5:11 pm
Location: Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by mayday »

just missed your auction for this winch on TM, if it dosent sell i have a set of almost new 31/10.5/15 maxxis m/t's im willing to trade if your keen? Cheers
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: F/S Warn 10,000lb low mount 12/24 volt spooled 50m+ Plasma

Post by sibainmud »

No trades thanks.
By the way this listing was "on behalf".
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
Post Reply

Return to “4WD Parts”