Castor Wedges?

[H2OLOVA]

Need to get hold of some 2 degree castor wedges. These are the things that you fit between your diff and springs to set castor angle. Where can i get some???

[SMOKEY]

Try Bellamy and East . 3654371 or failing that pinch some off Nibby's vehicle, he will never need them

FITZY.

[Bulletproof]

Need to get hold of some 2 degree castor wedges. These are the things that you fit between your diff and springs to set castor angle. Where can i get some???

If no one on ORE has any, the place that I have found best and always seem to have a good selection are the truck wreckers. Sometimes you just need to cut the sides off with an angle grinder. I know Nelson truck spares have a heap.

Cheers Richard

[H2OLOVA]

Nibbys truck doesn't have any otherwise i would have

Cheers for the help guys

[cruzerboy]

I need some for my cruiser to i was just going to make some but if you find any where that has some let me know

[H2OLOVA]

Truck Alignments in Columbia Ave Ch Ch have various sizes.

[andy3542]

an old thread i know but serves the purpose... looking for 8-12mm wedges for the back of my landrover... im not sure of angle and have only done rough estimate with ruler. anyone know a place around auckland where i could get some?

cheers

[H2OLOVA]

My best guess would be somewhere that does heavy vehicle wheel alignments.

[coxsy]

vincent truck wreckers in wiri

[GotFlex]

i have tried all around NZ and the best i could come up with was a set from John Bates, which is where i got my first set from, the problem is the in the ID of the centre pin is far too large.

[bda4130]

G guy motors in wgtn do them, think they're about 40 bucks

[andy3542]

good to know you can get them in NZ. does anyone know anywhere near Auckland?

cheers

[Swamped]

Theres a place here in hamilton that does them too. Not auckland but a bit closer than wellington.

[ClassicCruiserSpares]

Why not get your local enginneer to mill some up to the exact shape and size?