KZN106 Hilux buildup

Starting a project or modification? Then post it's progress here and show us some pic's.
Post Reply
User avatar
Dirty Lux
Stropper
Posts: 5
Joined: Fri May 06, 2011 7:24 pm
Location: West Melton, Chch

KZN106 Hilux buildup

Post by Dirty Lux »

This is my '94 Hilux

I started out this this bad larry 3 years ago standard as.

Within 2 months, i was down the waimak river with water halfway up the front window, thus hydrolicing it. I then had it rebuilt, put a snorkel on it, and 10,000km down the road, the main end bearing shat itself and rooted the motor.

In that amount of time, its been off the road for over a year after hydrolicing it and the blowing it up.

Since then Ive
Put a 94 1KZTE motr on with R151f gearbox (Done by Jeff Brown from J3 automotive)
Topmount intercooler from a Prado
2-4" lifting springs from Bellamy and East
2" body lift
Rear disc Brakes- Hilux solid front diff Disc's and Nissan Primera Callipers
35" KL71's on 15x8 white spokes
1" wheel spacers all round
10x Narva spotlights
Monza Racing seats (comfy as)
Farmer style bar at moment
boost gauge

In a few weeks its getting
A TJM bar
Custom Rock sliders
Twin Battery Setup moved to under deck
Twin 3" snorkels into custom airboxes
Drawbar cut and modified and lifted higher

Future plans include
lockers
bigger radiator
computer chip for boost/fuel cut
temp gauge/oil pressure gauge
full 3" exhaust from the turbo back
Winch
mikee
Hard Yaka
Posts: 101
Joined: Mon Nov 08, 2010 7:27 am

Re: KZN106 Hilux buildup

Post by mikee »

Didn't happen with out photos. :roll: :D
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: KZN106 Hilux buildup

Post by sibainmud »

^^^^^What he said ^^^^^^
So it's a tad custom then? :mrgreen:
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Dirty Lux
Stropper
Posts: 5
Joined: Fri May 06, 2011 7:24 pm
Location: West Melton, Chch

Re: KZN106 Hilux buildup

Post by Dirty Lux »

Image
Image
Image
Image
User avatar
Dirty Lux
Stropper
Posts: 5
Joined: Fri May 06, 2011 7:24 pm
Location: West Melton, Chch

Re: KZN106 Hilux buildup

Post by Dirty Lux »

Image
Image
Image
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: KZN106 Hilux buildup

Post by lincooln »

nice looking truck man, will look good with the new bar etc, not that that one looks bad

with the tow bar have you thought about a removable hitch? and have the hitch with a step down to keep it at a usable height then have a straight piece you can put a hook on?
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
Drurban
Hard Yaka
Posts: 623
Joined: Wed Mar 25, 2009 4:19 pm
Location: Tokoroa/Auckland

Re: KZN106 Hilux buildup

Post by Drurban »

That is a nice looking truck you have there. My friend has a double cab Hilux aswell similar to yours but the back is different on his.

Still nice truck.
1997 Isuzu Mu, 3.1TD, 5sp Manual.
User avatar
KIWI_TERRANO
Hard Yaka
Posts: 1138
Joined: Tue Feb 17, 2009 5:24 pm
Location: Kirwee

Re: KZN106 Hilux buildup

Post by KIWI_TERRANO »

lincooln wrote:nice looking truck man, will look good with the new bar etc, not that that one looks bad

with the tow bar have you thought about a removable hitch? and have the hitch with a step down to keep it at a usable height then have a straight piece you can put a hook on?



It already has a removable ay woody,
Shame it doesnt flex like a surf hahaha :lol:
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: KZN106 Hilux buildup

Post by sibainmud »

Forgive me for being anal.......but I can only count 8 spotties. Do ya have 2 pointing backwards or something?
Nice wagon. heaps of potential.
Chur
I keep looking for the loose nut behind the wheel, but I can't find it!!
mikee
Hard Yaka
Posts: 101
Joined: Mon Nov 08, 2010 7:27 am

Re: KZN106 Hilux buildup

Post by mikee »

Hi Dan those 35's look small on your truck but how do find them.
User avatar
Dirty Lux
Stropper
Posts: 5
Joined: Fri May 06, 2011 7:24 pm
Location: West Melton, Chch

Re: KZN106 Hilux buildup

Post by Dirty Lux »

Yea, there's two facing backwards for reverse/work/blinding people lights

When i get the bar work done, im going to get the drawbar modified and lifted higher. Its already got the removable tounge in it and get some recovery hooks put on it

In some of the pics, it has 33's on it. I got the 35's back in March
User avatar
Dirty Lux
Stropper
Posts: 5
Joined: Fri May 06, 2011 7:24 pm
Location: West Melton, Chch

Re: KZN106 Hilux buildup

Post by Dirty Lux »

Got my new bar and sliders on yesterday

Bar is a TJM item modified from a surf with stronger mounting points reeady for winch

Sliders were made for a hilux.can't remember the thickness of the steel used, but the guy that had them before me had suported his whole truk on them without bending or even getting dents in them

Il get pics up later.having trouble uploading
Post Reply

Return to “Projects / Mod's”