28-29 May 2011

Post what you achieved in the weekend.
Include the date of the weekend eg 25/02/2006
Thanks to Turoa for a great forum idea!
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: 28-29 May 2011

Post by lincooln »

I bloody well new you would do that simon, :wink: :roll: :evil:
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
SP450andLE
Hard Yaka
Posts: 992
Joined: Fri Sep 24, 2010 10:38 am
Location: Beach Haven and kaiwaka

Re: 28-29 May 2011

Post by SP450andLE »

uwshho wrote:
sibainmud wrote:
lincooln wrote: helped out uwshho until basically 1:30


You'll never guess why the engine wouldn't go back in and how long it took me to find it :mrgreen: :lol:

Two dowel pins aren't better than one :lol: :lol: , at least not in the same position (one in block, one in bellhousing)

I was looking for 1.5 mins :D

Did a wee recovery this morning that got me out of the house.
Still have the right hand CV shaft to fit.

Cheers,



Dont be so modest :lol: was more like 30seconds :lol:

Oh well at least it was found sooner than later and motor is pretty much installed now :mrgreen:

Cheers


You're still wanting to drive that thing :?: :?: :lol:

My mate came round today with his new Gt-t Caldina - so all in all, a pretty Toyota-filled weekend for me :roll: :lol: :lol:
tomsoffroad wrote:None of us know what we are doing really. But thats how you get experience.
phraza
Hard Yaka
Posts: 898
Joined: Thu Oct 15, 2009 8:44 am
Location: North Shore, Auckland
Contact:

Re: 28-29 May 2011

Post by phraza »

SP450andLE wrote:My mate came round today with his new Gt-t Caldina - so all in all, a pretty Toyota-filled weekend for me :roll: :lol: :lol:


mmm i used to have one of those. Mine was frickn quick. Kind of miss it lol
2WD 06 Hilux... for now
User avatar
mudslut
Hard Yaka
Posts: 221
Joined: Tue Mar 17, 2009 9:09 pm
Location: Hamilton

Re: 28-29 May 2011

Post by mudslut »

snaped a rear axle in my L200 driving on SH1 through huntly had D.B,Satilite & D.B jr(Alex) with me lucky we were only doin 50 km it snapped right buy the wheel bearing :?
After the L200 got trailered back to D.Bs we carried on up to LANDROVER SPARES in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end :D
User avatar
UBZ
Hard Yaka
Posts: 1647
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: 28-29 May 2011

Post by UBZ »

pulled out destroyed stuff
put in new stuff
kicked stuff
dropped off borrowed stuff
drunk stuff
talked about stuff
picked up cool stuff
stared at stuff
threw stuff
figured out stuff
drove around stuff
laughed at stuff

awesome weekend. :mrgreen:
LR110 ..... LJ50 project :roll:
Chris.
User avatar
DieselBoy
Hard Yaka
Posts: 4568
Joined: Sun Nov 14, 2004 12:00 pm

Re: 28-29 May 2011

Post by DieselBoy »

mudslut wrote:snaped a rear axle in my L200 driving on SH1 through huntly had D.B,Satilite & D.B jr(Alex) with me lucky we were only doin 50 km it snapped right buy the wheel bearing :?
After the L200 got trailered back to D.Bs we carried on up to http://www.landroverspares.co.nz in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end :D


Checkin out the new found negative camber on the rear wheel :lol: :lol:
Image

A bit of a squeeze onto the trailer :twisted: :twisted:
Image

And the carnage:
Image
Image

A real WTF breakage. I'm busting to know where the Ute went last weekend, co's axles don't just break trundling down the road at 50kph :mrgreen: :mrgreen: :mrgreen: :mrgreen:
lax2wlg wrote:Is that like saying 'she's hot, for a crackwhore??
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: 28-29 May 2011

Post by muddyhilux »

body finally off after last weekend didn't go as planed and ready for the tidy up.now if only i had the money to find sas components :lol:

Image
1990 surf 350 chevy jacked up and currently under construction again
vinceparts
Hard Yaka
Posts: 284
Joined: Tue Mar 15, 2011 1:59 pm
Location: East Auckland

Re: 28-29 May 2011

Post by vinceparts »

made a drop down hitch for my new towbar, best of both worlds, low profile for offroad and low enough to tow a car trailer, will be trying it out during the week to see if its up to the task before doing a w.e of towing to taupo
Image
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: 28-29 May 2011

Post by Sadam_Husain »

took the 40 for a blat around the south coast beaches to catch up with the beer_cruisers and beer_tara at their bach on friday night, drank, ate and talked heaps of shit, came back sat morning and headed up to rallywoods and gave Reece a hand to smash heaps of nails into the new gazebo extension, had lunch and a few coldies then mowed a couple of thousand hectares of grass with Taz around green hut, waterblasted all last weekends mud off the 40 on sunday and as ubz said....

awesome weekend. :mrgreen:
User avatar
rangimotors
Hard Yaka
Posts: 1631
Joined: Thu May 10, 2007 12:00 pm
Location: chch

Re: 28-29 May 2011

Post by rangimotors »

DieselBoy wrote:
mudslut wrote:snaped a rear axle in my L200 driving on SH1 through huntly had D.B,Satilite & D.B jr(Alex) with me lucky we were only doin 50 km it snapped right buy the wheel bearing :?
After the L200 got trailered back to D.Bs we carried on up to http://www.landroverspares.co.nz in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end :D


Checkin out the new found negative camber on the rear wheel :lol: :lol:
Image

A bit of a squeeze onto the trailer :twisted: :twisted:
Image

And the carnage:
Image
Image

A real WTF breakage. I'm busting to know where the Ute went last weekend, co's axles don't just break trundling down the road at 50kph :mrgreen: :mrgreen: :mrgreen: :mrgreen:

nice, how much rubber in the gaurds from the workshop boy ripping skids? :mrgreen:
Never argue with an idiot, they drag you down to their level then beat you with experiance!
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 28-29 May 2011

Post by wopass »

cut some stuff off
welded some stuff on
decided that what i welded on was the most muppet shit idea
went for a swim
cut some muppet shit idea stuff off
started welding more stuff... might finish it this week....
If you already know everything, DON'T ask bloody questions!!
User avatar
Overkill
Hard Yaka
Posts: 294
Joined: Sun Sep 05, 2010 8:26 pm
Location: Paraparaumu

Re: 28-29 May 2011

Post by Overkill »

Had a blast on some forest tracks with some great guys....

Put a bonnet scoop on the Disco and wished I had done it earlier. Reduced temps by 6 degrees up my long local hill and didn't need to put on the extra fans on when having a blast offroad..... :mrgreen:
Image
User avatar
pjb
Hard Yaka
Posts: 282
Joined: Wed Feb 17, 2010 8:37 am
Location: North Shore City

Re: 28-29 May 2011

Post by pjb »

Bit late posting...

Solid day had at woodhill:

Tripled the number of dents, busted the power steering, lost all the camber shims on one side. Worst of all, damaged what sounds like a big end... :shock:

Time for a new engine I guess.
94 Pajero SWB, 3.5 V6
Post Reply

Return to “This weekends achievements”