28-29 May 2011
Re: 28-29 May 2011
I bloody well new you would do that simon,

Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
-
SP450andLE
- Hard Yaka
- Posts: 992
- Joined: Fri Sep 24, 2010 10:38 am
- Location: Beach Haven and kaiwaka
Re: 28-29 May 2011
uwshho wrote:sibainmud wrote:lincooln wrote: helped out uwshho until basically 1:30
You'll never guess why the engine wouldn't go back in and how long it took me to find it![]()
![]()
Two dowel pins aren't better than one![]()
, at least not in the same position (one in block, one in bellhousing)
I was looking for 1.5 mins![]()
Did a wee recovery this morning that got me out of the house.
Still have the right hand CV shaft to fit.
Cheers,
Dont be so modestwas more like 30seconds
![]()
Oh well at least it was found sooner than later and motor is pretty much installed now![]()
Cheers
You're still wanting to drive that thing
My mate came round today with his new Gt-t Caldina - so all in all, a pretty Toyota-filled weekend for me
tomsoffroad wrote:None of us know what we are doing really. But thats how you get experience.
-
phraza
- Hard Yaka
- Posts: 898
- Joined: Thu Oct 15, 2009 8:44 am
- Location: North Shore, Auckland
- Contact:
Re: 28-29 May 2011
SP450andLE wrote:My mate came round today with his new Gt-t Caldina - so all in all, a pretty Toyota-filled weekend for me![]()
![]()
mmm i used to have one of those. Mine was frickn quick. Kind of miss it lol
2WD 06 Hilux... for now
Re: 28-29 May 2011
snaped a rear axle in my L200 driving on SH1 through huntly had D.B,Satilite & D.B jr(Alex) with me lucky we were only doin 50 km it snapped right buy the wheel bearing
After the L200 got trailered back to D.Bs we carried on up to LANDROVER SPARES in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end
After the L200 got trailered back to D.Bs we carried on up to LANDROVER SPARES in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end
Re: 28-29 May 2011
pulled out destroyed stuff
put in new stuff
kicked stuff
dropped off borrowed stuff
drunk stuff
talked about stuff
picked up cool stuff
stared at stuff
threw stuff
figured out stuff
drove around stuff
laughed at stuff
awesome weekend.
put in new stuff
kicked stuff
dropped off borrowed stuff
drunk stuff
talked about stuff
picked up cool stuff
stared at stuff
threw stuff
figured out stuff
drove around stuff
laughed at stuff
awesome weekend.
LR110 ..... LJ50 project
Chris.
Chris.
Re: 28-29 May 2011
mudslut wrote:snaped a rear axle in my L200 driving on SH1 through huntly had D.B,Satilite & D.B jr(Alex) with me lucky we were only doin 50 km it snapped right buy the wheel bearing![]()
After the L200 got trailered back to D.Bs we carried on up to http://www.landroverspares.co.nz in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end
Checkin out the new found negative camber on the rear wheel

A bit of a squeeze onto the trailer

And the carnage:


A real WTF breakage. I'm busting to know where the Ute went last weekend, co's axles don't just break trundling down the road at 50kph
lax2wlg wrote:Is that like saying 'she's hot, for a crackwhore??
- muddyhilux
- Hard Yaka
- Posts: 1307
- Joined: Wed Oct 04, 2006 12:00 pm
- Location: auckland
Re: 28-29 May 2011
body finally off after last weekend didn't go as planed and ready for the tidy up.now if only i had the money to find sas components


1990 surf 350 chevy jacked up and currently under construction again
-
vinceparts
- Hard Yaka
- Posts: 284
- Joined: Tue Mar 15, 2011 1:59 pm
- Location: East Auckland
Re: 28-29 May 2011
made a drop down hitch for my new towbar, best of both worlds, low profile for offroad and low enough to tow a car trailer, will be trying it out during the week to see if its up to the task before doing a w.e of towing to taupo


- Sadam_Husain
- Angry bird
- Posts: 5164
- Joined: Mon Feb 20, 2006 12:00 pm
- Location: WELLINGTON
Re: 28-29 May 2011
took the 40 for a blat around the south coast beaches to catch up with the beer_cruisers and beer_tara at their bach on friday night, drank, ate and talked heaps of shit, came back sat morning and headed up to rallywoods and gave Reece a hand to smash heaps of nails into the new gazebo extension, had lunch and a few coldies then mowed a couple of thousand hectares of grass with Taz around green hut, waterblasted all last weekends mud off the 40 on sunday and as ubz said....
awesome weekend.
awesome weekend.
- rangimotors
- Hard Yaka
- Posts: 1631
- Joined: Thu May 10, 2007 12:00 pm
- Location: chch
Re: 28-29 May 2011
DieselBoy wrote:mudslut wrote:snaped a rear axle in my L200 driving on SH1 through huntly had D.B,Satilite & D.B jr(Alex) with me lucky we were only doin 50 km it snapped right buy the wheel bearing![]()
After the L200 got trailered back to D.Bs we carried on up to http://www.landroverspares.co.nz in D.Bs Defender to get the new lift pump for the defender it was a big day but we got there in the end
Checkin out the new found negative camber on the rear wheel![]()
![]()
A bit of a squeeze onto the trailer![]()
![]()
And the carnage:
A real WTF breakage. I'm busting to know where the Ute went last weekend, co's axles don't just break trundling down the road at 50kph![]()
![]()
![]()
nice, how much rubber in the gaurds from the workshop boy ripping skids?
Never argue with an idiot, they drag you down to their level then beat you with experiance!
Re: 28-29 May 2011
cut some stuff off
welded some stuff on
decided that what i welded on was the most muppet shit idea
went for a swim
cut some muppet shit idea stuff off
started welding more stuff... might finish it this week....
welded some stuff on
decided that what i welded on was the most muppet shit idea
went for a swim
cut some muppet shit idea stuff off
started welding more stuff... might finish it this week....
If you already know everything, DON'T ask bloody questions!!
Re: 28-29 May 2011
Had a blast on some forest tracks with some great guys....
Put a bonnet scoop on the Disco and wished I had done it earlier. Reduced temps by 6 degrees up my long local hill and didn't need to put on the extra fans on when having a blast offroad.....
Put a bonnet scoop on the Disco and wished I had done it earlier. Reduced temps by 6 degrees up my long local hill and didn't need to put on the extra fans on when having a blast offroad.....

Re: 28-29 May 2011
Bit late posting...
Solid day had at woodhill:
Tripled the number of dents, busted the power steering, lost all the camber shims on one side. Worst of all, damaged what sounds like a big end...
Time for a new engine I guess.
Solid day had at woodhill:
Tripled the number of dents, busted the power steering, lost all the camber shims on one side. Worst of all, damaged what sounds like a big end...
Time for a new engine I guess.
94 Pajero SWB, 3.5 V6