Suzuki diff question

For all Suzuki related topics
Post Reply
User avatar
Big-AL
Hard Yaka
Posts: 549
Joined: Tue Oct 24, 2006 12:00 pm
Location: Hibiscus Coast, Auckland

Suzuki diff question

Post by Big-AL »

does anyone know if the 1600cc LWB and SWB front diffs are the same?
User avatar
lincooln
Hard Yaka
Posts: 1251
Joined: Tue May 22, 2007 12:00 pm
Location: Kaiwaka and Dorkland

Re: Suzuki diff question

Post by lincooln »

I am not sure exactly but I always thought that the only different diffs were in the auto and manuals and in the v6's. LWB to SWB I thought were the same. I could be wrong though, sure to be corrected.
Lubrication Specialist
Lubrication Engineers
www.lubeng.com.au lincoln@lubengnz.co.nz
User avatar
Rotazuk
Hard Yaka
Posts: 937
Joined: Mon Jun 16, 2003 12:00 pm
Location: Auckland - New Zealand
Contact:

Re: Suzuki diff question

Post by Rotazuk »

physically the same yes . Ratio's well from all the ones I have come across swb are 5.12's unless you have a carb'ed auto then it will have 4.62's .

There is debate that some swb 8v efi auto's had 4.62's as well . The 16v swb and lwb are all seem to be 5.12's manual or auto .

Chris
User avatar
churchill
Hard Yaka
Posts: 1128
Joined: Thu Nov 11, 2010 7:28 pm
Location: Auckland

Re: Suzuki diff question

Post by churchill »

I think the front diff changed to 26 spline in 1994 but supposedly only the side gears changed. Originally they were 22 spline.
User avatar
lneil
Hard Yaka
Posts: 592
Joined: Fri Aug 17, 2007 12:00 pm
Location: Reefton

Re: Suzuki diff question

Post by lneil »

Rotazuk and Churchill are correct.

The early 3Dr 8V (both carburetted and single-point EFi) autos were 4.625 diffs.

All 5Drs are 16V so are all 5.125, same as the 3Dr manuals and 16V 3Dr autos.

As far as I'm aware, very few early 3Drs had the 22-spline fronts. I have a 1989 8V EFi auto which was 4.625 diffs with 26 spline axles.
'89 3-Dr scud. 2" body lift, 2" suspension, Snorkel, 31x10.5's, Evil-daughter chose the paint-job.
Post Reply

Return to “Suzuki”