24/25/26th june

[kbushnz]

30 mins is air nz stuff, if something catch you know bdq,

what??

i even read it backwards to see if that worked but to no avail...

Yah, fukd if I can work this one out!!!!

I work at Air NZ, and we have all sorts of Health and Safety rules. Especially about welding in the hangars.
Coxsy is a contractor who comes to fix broken bits from time to time.

Any how, I really stayed to watch as a mate had his Hot rod almost catch fire after he was welding in the garage.
He went inside for a coffee straight after welding, missus came home and said whats all the smoke in the garage
Needless to say he now watches for a bit after welding to see if anything catches.
I followed his lead.

Calvin

[mudlva]

30 mins is air nz stuff, if something catch you know bdq,

I think it's how you talk in south Auckland but I have never cracked that code

ffck i live south of a.k. as well and i still cant understand

i still think coxsy has way to much caffine

[lincooln]

Good day at Woodhill, didn't break anything so was all good. Needs a clean now. Photos when I can be bothered

[SP450andLE]

30 mins is air nz stuff, if something catch you know bdq,

I think it's how you talk in south Auckland but I have never cracked that code

ffck i live south of a.k. as well and i still cant understand

i still think coxsy has way to much caffine

My interpretation:

Waiting for 30 mins is the sort of thing that would be done at Air NZ. If something was going to catch fire, you would know relatively quickly.

Close?

[lincooln]

read the post 3 up from yours for the answer

[sibainmud]

Woodhill today with Lincolin, Caleb, and a couple of other clubbies.
Saw a couple of guys from Shore 4 Wheelers and got them on film coming up Superwinch Hill.
Sorry Boys, only a little porn to watch.

Quiet day.
Cheers,

[J_Dub]

did some stuff on the lux
1 step closer to having engine permenantly in and fireing

[Filthy4x4]

Had a wicked day out at woodhill today. Tried a few new tracks that I didnt even know existed, gained a couple of new dents

One of my cvs is sounding like it wants out and tie rods are now a bit worse for wear such is life, nothing broke so im happy

For once I only came home with 5 pics instead of the usual 50+









Caleb

[niblik]

fonterra's permit to work system has the same time frame after hot work.

i do practice the same thing at home.

p.s.. tyres should be on the ground...

[coxsy]

haha and still don't care if you understand or not,
oh sorry age thing again p,d,q pretty, darn ,quick.

[wopass]

Woodhill today with Lincolin, Caleb, and a couple of other clubbies.
Saw a couple of guys from Shore 4 Wheelers and got them on film coming up Superwinch Hill.
Sorry Boys, only a little porn to watch.

Quiet day.
Cheers,

that V8 patrol at the end sounds so freekin good!!

[sibainmud]

Woodhill today with Lincolin, Caleb, and a couple of other clubbies.
Saw a couple of guys from Shore 4 Wheelers and got them on film coming up Superwinch Hill.
Sorry Boys, only a little porn to watch.

Quiet day.
Cheers,

that V8 patrol at the end sounds so freekin good!!

Yeah, that's Diesel Dave with the Chev powered shorty.
He broke a hub today, 15 mins later it was all fixed.
He also made it to the top of the sand slides (where Muddylux rolled), I have never seen a truck get to the top of those before

P.S, Yes I know the wheels supposed on the ground

Cheers,

[Dr_PC]

Got strarted on "RustyDemon" this afternoon









will take out the VERY rusty diffs and springs tomorrow and chuck in new ones during the week
Al

Send it down to Pete, only about a 3 days work for him

[Dr_PC]

BDQ Bloody Dam Quick.
Mind you we ALWAYS do a weld watch of 30 mins to 1 hour after welding, need to wash the fumes down. Fumes are also funny they affect my engineer and he needs Tui to clear them but I need Rum.

[wjw]

Went for a little tiki tour in the cruiser:









Why people say you shouldn't buy AVM hubs:

[phraza]

Damn that hub got nailed

[FORGE1]

Went down to Aucks to meet the people from Tauranga to get the wifes challenger. Wow actually quite suprised its exactly what they said in the auction. haha this time we purchased it off a genuine seller and not someone trying to get rid of something that wont last long.
And they got it serviced the day before they came up so a plus for that.

Sorry Jase about Quadstyles Safari giving up the ghost (transmission) but lucky it happened before I went to get it for you and didnt happen when you got it.

[Bliksem]

Went for a run down a Waiuku forest on Sat.

Snapped something in the front Axle in the first 20 mins, not a happy camper. Limped around in 2WD for the rest of the day.

Sometimes life sucks!

[Pico42]

A bit after the weekend but... today I took the Vitara through its certification inspection. 99% good - just need to replace the nuts at the top of the struts with nylock ones (... and since I am replacing the struts anyway...).

Really pleased it went through OK.

[KIWI_TERRANO]

Went for a run down a Waiuku forest on Sat.

Snapped something in the front Axle in the first 20 mins, not a happy camper. Limped around in 2WD for the rest of the day.

Sometimes life sucks!

Yummy yummmy i like, Needs a deck though haha

them diff are weak I think from reeding the oz mags

[ol_smokey.]

went up thomsons track pines with a mate in his cruser wicked day plenty of sun & mud.

[Big Will]

Oh that looks like some fun!!

[terranoman]

went up thomsons track pines with a mate in his cruser wicked day plenty of sun & mud.

what track is that on?

[Bubba]

I finally got off my ass and went out and removed a tank from a 73 FRP. A few too many return lines but should bolt straight in.

just need to take out the LPG and Aux petrol tank to fit the new tank, tune up and it's away.

Anyone want a LPG system?? Cheap as chips mate!

[phraza]

oh and i got my Alternator fixed yesturday, and a WOF. nothing wrong with it. Love it when it flies through

[jonossiksilvia]

Went for a little tiki tour in the cruiser:









Why people say you shouldn't buy AVM hubs:

where bouts was those top 3 pictures? dont think i have been there before.

[ClassicCruiserSpares]

Went for a little tiki tour in the cruiser:









Why people say you shouldn't buy AVM hubs:

where bouts was those top 3 pictures? dont think i have been there before.

Apart from the hub it looked like you guys had fun, were did you guys go? doesnt look familiar?

[ol_smokey.]

went up thomsons track pines with a mate in his cruser wicked day plenty of sun & mud.
[img]


what track is that on?

went from thomsons through to lund road

[JR]

Went for a little tiki tour in the cruiser:









Why people say you shouldn't buy AVM hubs:

where bouts was those top 3 pictures? dont think i have been there before.

Apart from the hub it looked like you guys had fun, were did you guys go? doesnt look familiar?

was up towards oxford, had another hub so wasnt bad, did the front window to on the way home. dam trees