Hi folks,
I'm replacing the roof of my samurai/sierra (big tree fell on it) and being a bit stupid, didn't measure the body gaps before I cut the old roof off (and, to be fair, it was squashed down a fair bit anyway) - does anyone have one with the door, windscreen, and / or rear door rubber off, who can tell me the inside measurements of any of the openings so I can check the gaps - I was going to just eyeball the door fits, but I think I should at least try and get the windscreen opening right if I can...
thanks,
Terry
Height of Sami / 413 windscreen opening?
- skid
- Tyre Man
- Posts: 6311
- Joined: Thu Oct 06, 2005 12:00 pm
- Location: WELLINGTON-0272417757
- Contact:
Re: Height of Sami / 413 windscreen opening?
dunno if it helps, but I got a 410 that previous owner chopped off roof and doors but left windscreen in place........

if its any use, let me know and will take tape measure outside tomorrow when its light again, unless you are in the hutt tomorrow and you can measure it yourself

if its any use, let me know and will take tape measure outside tomorrow when its light again, unless you are in the hutt tomorrow and you can measure it yourself

80 Series on 35" creepies, manual with twin factory lockers.
0272417757
*CHILLAX BRO.*
0272417757
*CHILLAX BRO.*
Re: Height of Sami / 413 windscreen opening?
Hi Skid, thanks, that'd help heaps. cheers, Terry
Re: Height of Sami / 413 windscreen opening?
The windscreens in those trucks are flat anyway so it wont affect that side of it as you can get them cut to size
***Got the balls, just ain't got the bucks***