maxxis creepys
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
maxxis creepys
if i dont win the maxxis trepadors on tm then these are the next best option on tm atm
question is they are 16s how much of a difference is this to a 15" apart from the rim size is the tyre size the same overall?
also they are down to around 6mm on two and 9mm on the other two would these still preform well offroad?
opinions on what would be best or suggestions would be good
thanks all
question is they are 16s how much of a difference is this to a 15" apart from the rim size is the tyre size the same overall?
also they are down to around 6mm on two and 9mm on the other two would these still preform well offroad?
opinions on what would be best or suggestions would be good
thanks all
- Sadam_Husain
- Angry bird
- Posts: 5164
- Joined: Mon Feb 20, 2006 12:00 pm
- Location: WELLINGTON
Re: maxxis creepys
creepies are really heavy stiff sidewalled tyres and are suited to heavy trucks like safaris, even on both my cruisers its hard to get them to bag out untill you get down to 8 or 6 or less psi. good tyres in ruts with the side biting lugs espically on 10 inch rims and they stand up well to sidewall damage you get from riverbed work
6 or 9mm tread depth is getting down to spare tyre quality and the price should reflect that
6 or 9mm tread depth is getting down to spare tyre quality and the price should reflect that

Re: maxxis creepys
Sadam_Husain wrote:6 or 9mm tread depth is getting down to spare tyre quality and the price should reflect that
6mm would be sand tyres or a spare for me too. What sorta money they after?
Is it these? They do come on rims so maybe not too bad a deal. You'd be looking at $140 a rim probably if you wanted just them new.
http://www.trademe.co.nz/motors/car-parts-accessories/wheels-tyres/rv-suv/auction-389967046.htm
Re: maxxis creepys
these are more you dude.............
http://www.trademe.co.nz/Browse/Listing ... =389190676
http://www.trademe.co.nz/Browse/Listing ... =389190676
WARNING:
Insanity has replaced reason in the modification of this vehicle
you can follow me, but its gunna hurt
Insanity has replaced reason in the modification of this vehicle
you can follow me, but its gunna hurt
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
Re: maxxis creepys
Swamped wrote:Sadam_Husain wrote:6 or 9mm tread depth is getting down to spare tyre quality and the price should reflect that
6mm would be sand tyres or a spare for me too. What sorta money they after?
Is it these? They do come on rims so maybe not too bad a deal. You'd be looking at $140 a rim probably if you wanted just them new.
http://www.trademe.co.nz/motors/car-parts-accessories/wheels-tyres/rv-suv/auction-389967046.htm
yeah those are the next best on trademe atm the auction shows the rims and says on 16s so should come with rims
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
Re: maxxis creepys
taz01 wrote:these are more you dude.............
http://www.trademe.co.nz/Browse/Listing ... =389190676
bit outta my price range atm there taz sorry mate
plus 37s are well huge
- safaripete
- Hard Yaka
- Posts: 777
- Joined: Sun May 11, 2008 10:54 pm
- Location: palmerston north
Re: maxxis creepys
just confirmed they are on rims
so for 1k is the deal worth it or should i carry on looking?
so for 1k is the deal worth it or should i carry on looking?
Re: maxxis creepys
safaripete wrote:just confirmed they are on rims
so for 1k is the deal worth it or should i carry on looking?
Carry on looking man, If you can borrow a 35 or to to use for the set up then just wait till a good set thats worth the money comes along. You wont have it ready to run for a good few months yet so you got plenty of time to find the right ones

Didn't barbie drive a jeep??
- mudlva
- Hard Yaka
- Posts: 2918
- Joined: Mon Apr 16, 2007 12:00 pm
- Location: fixing another cv!! dam lockers (Papakura)
Re: maxxis creepys
yeah i would say keep looking and flying brick Nathan has a set new for 1500 ( or were they 37s??)
- flyingbrick
- Hard Yaka
- Posts: 1725
- Joined: Sun Jan 18, 2009 7:36 pm
- Location: Hamilton/Auckland
Re: maxxis creepys
yeah man, 37's. Brand new, still have the dangly bits. Just need a 4" lift and maybe some guard trimming. DOOOo ittttttt.
Everyone will be like " wow he has 37's" and think you are cool and stuff.
Worked for me.
Tires will come with passport photo of tires for your wallet if required, so people can see them and think you are cool even when ur away from the truck.

Everyone will be like " wow he has 37's" and think you are cool and stuff.
Worked for me.
Tires will come with passport photo of tires for your wallet if required, so people can see them and think you are cool even when ur away from the truck.

phone Ross Bolus (secretary of the BOP club) He'll save you.
- skid
- Tyre Man
- Posts: 6311
- Joined: Thu Oct 06, 2005 12:00 pm
- Location: WELLINGTON-0272417757
- Contact:
Re: maxxis creepys
i run the 35 creepies on the 80 dude
have put them on at the lockup before when they were all flat 0-3psi and drove a km down the road to pump them up with no dramas, so as Marty said they take a bit to bag and as you know the 80 weighs 2500kg
awesome in rallywoods tracks though
have put them on at the lockup before when they were all flat 0-3psi and drove a km down the road to pump them up with no dramas, so as Marty said they take a bit to bag and as you know the 80 weighs 2500kg
awesome in rallywoods tracks though

80 Series on 35" creepies, manual with twin factory lockers.
0272417757
*CHILLAX BRO.*
0272417757
*CHILLAX BRO.*
- mudlva
- Hard Yaka
- Posts: 2918
- Joined: Mon Apr 16, 2007 12:00 pm
- Location: fixing another cv!! dam lockers (Papakura)
Re: maxxis creepys
yes i used to run my crawlers at 8 in the front and 6 in the rear and they were still hard enough to take the weight of the truck on the side wall complete and not push any dirt into the beads
the only tyre that ive run that did not require bead lock rim
the only tyre that ive run that did not require bead lock rim

- rangimotors
- Hard Yaka
- Posts: 1631
- Joined: Thu May 10, 2007 12:00 pm
- Location: chch
Re: maxxis creepys
from looking at the pics i wouldnt buy them, i reckon you might get a couple of months before they are completley bald and then they are worth nothing. If you cant afford to get anything better then keep saving for a while and buy something that will last years not months. Nothing worse than thowing cash away just caus you couldn't afford that extra couple of hundred for something 10 times as good.
I might think about paying 600 for them but thats it..
I might think about paying 600 for them but thats it..
Never argue with an idiot, they drag you down to their level then beat you with experiance!
- mudlva
- Hard Yaka
- Posts: 2918
- Joined: Mon Apr 16, 2007 12:00 pm
- Location: fixing another cv!! dam lockers (Papakura)
Re: maxxis creepys
hay Pete
i got a mate with a set of 35x15 crawlers that he wants to move on next to new been on a zook and are way to hard for him. hes now running radials and doing way better
anyways near new, never been used on the road, mint condition
$1400
pm me if you are keen
tyres are in papakura
no rims or tubes
cheers
i got a mate with a set of 35x15 crawlers that he wants to move on next to new been on a zook and are way to hard for him. hes now running radials and doing way better
anyways near new, never been used on the road, mint condition
$1400
pm me if you are keen
tyres are in papakura
no rims or tubes
cheers
Re: maxxis creepys
Hey Mudlva, they still available..? if so freight to Queenstown..? Just going through the motions if freight isn't that bad Then I might grab em.. cheers
- mudlva
- Hard Yaka
- Posts: 2918
- Joined: Mon Apr 16, 2007 12:00 pm
- Location: fixing another cv!! dam lockers (Papakura)
Re: maxxis creepys
Big wrote:Hey Mudlva, they still available..? if so freight to Queenstown..? Just going through the motions if freight isn't that bad Then I might grab em.. cheers
um dont know ring up main freight or daily freight to see what they will charge you. the owner will be able to deliver the tyres to there depot in penrose with a pallet and a name label. the rest will be your responsiblity.
as im only doing this on behalf i will be only passing the messages on
cheers
Re: maxxis creepys
Thnx mate, will check it out..