high output advice need

For all Suzuki related topics
Post Reply
QUADRACER
Hard Yaka
Posts: 587
Joined: Sat Feb 03, 2007 12:00 pm
Location: Amberley

high output advice need

Post by QUADRACER »

high output alternator needed, any ideas to suit g16 b motor
don`t mine to mod but would like something close
thanks in advance
retired 4wd to a ford ranger and UTV
User avatar
Terry
Hard Yaka
Posts: 135
Joined: Sun Sep 05, 2004 12:00 pm
Location: Kapiti & Wellington

Re: high output advice need

Post by Terry »

I hung a 110 amp alternator off a Fairmont / Fairlane on mine, $46 from pickapart - need to take the plug as well - splice the plug to the Samurai low-current wiring, replace the output wire with something heavier and put a circuit breaker in place of the fusible link. On a 16A the standard bracket almost fits perfectly, there's a little bit of grinding on the bracket and the adjuster arm and you need a slightly longer belt. I'd hope the 16B block isn't much different. Assuming you've got v-belt pullies your home and hosed (I swapped the vitara alternator pulley, but you can use the ford one). There's a number of writeups on the net, I've "archived" a few into a word doc, PM or post an email address and I' can send you a copy - might even finish my own write-up (I never seem to finish that bit of the job...). well worth doing. cheers, TerryImage
suzookyman
Hard Yaka
Posts: 649
Joined: Fri Mar 05, 2004 12:00 pm
Location: Whangarei

Re: high output advice need

Post by suzookyman »

Yup, EF OR EL Falcon.Get the Misubishi one as i think its 110amp and the bosch is 90amp
Al
"It's a Suzuki thing - you wouldn't understand !"
User avatar
new2zukes
Hard Yaka
Posts: 761
Joined: Thu Sep 06, 2007 12:00 pm
Location: kerikeri northland

Re: high output advice need

Post by new2zukes »

yep thats the same alternator im running on my truck it works great :)
Post Reply

Return to “Suzuki”