bought a house so parts for sale.

Selling, info, or parts wanted. Anything about parts goes in here.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

bought a house so parts for sale.

Post by flyingbrick »

As everyone knows I've achieved sweet f all of this project and priorities have just changed so its getting parted out.

vh45 4.5 litre all aluminum nissan v8. Good condition, near 300hp stock, with loom and ECU.

Comes with nissan safari gearbox/transfer case which has extra clutch packs and bell housing fitted to accept the engine.

$2,000 ONO

37x12.5 r16 creepy crawlers x4. New, never driven on but have fitted to wheels. $1500 ONO

16x10 alloy wheels x4. New, have had tires fitted but never driven on. PCD 6/139.7 Offset -50 and just 11.5kg per wheel.
$1000 ONO

Image

Nissan Safari axles, GQ, Auto, complete with disks. Can come with (cut down) chassis, arms, links, springs etc. OFFERS.

Autosport race seats x2. Steel frame. Comfortable. Fabric tatty around the base and some worn areas but more than good enough for any 4wd IMO $100 FIRM

FIBERGLASS cj3b jeep tub. New, never fitted to chassis. Rear arches tastefully cut out at the rear to give increased tire clearance. Supposed to have a RRP of around 6k I think. $1,500 ONO.

Genuine steel cj2a tailgate. Well used. Has a few holes drilled in that aren't needed and a bit of rust and dents but well useable with a bit of work.. or hang on the wall in ur shed. OFFERS.

NEW MB/GPW reproduction steel bonnet, with hinge. Painted in olive drab primer. Totally straight and as new. $150 FIRM. also have 1x pair of brand new in packet front catches for $50 FIRM

More to be added.

Can post pics for all parts below if requested.


EDIT:
ALUMINUM RADIATOR. NEW, has been sitting under my bed for the past 6 months. to fit Toyota Supra RZ TT model but will go into anything you want with a little work. Largest radiator I could find for less than $500, 400x738x50. Perfect for using as a rear mounted radiator OR in anything thats had a high performance engine transplant, 1uz or similar.
Will sell for $200 FIRM.

-Nathan
Last edited by flyingbrick on Sat Jul 09, 2011 12:51 pm, edited 1 time in total.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
ClassicCruiserSpares
Sausage Shack
Posts: 1259
Joined: Sat Jan 16, 2010 9:16 pm
Location: Christchurch,

Re: bought a house so parts for sale.

Post by ClassicCruiserSpares »

Hey mate, sorry to hear the projects come to a halt but thats life sometimes. Im keen on the seats can you pm any pics?
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

cheers pal.

I'm away from home with work at the moment so have to post old trademe pics.

Image

Image

Forgot to mention, Pickup or ORE courier preferred!
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: bought a house so parts for sale.

Post by safaripete »

also keen on the seats
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Seats SOLD.

Sorry Pete :)
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: bought a house so parts for sale.

Post by safaripete »

dammit

no worries mate
User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: bought a house so parts for sale.

Post by mudlva »

flyingbrick wrote:As everyone knows I've achieved sweet f all of this project and priorities have just changed so its getting parted out.

vh45 4.5 litre all aluminum nissan v8. Good condition, near 300hp stock, with loom and ECU.

Comes with nissan safari gearbox/transfer case which has extra clutch packs and bell housing fitted to accept the engine.

$2,000 ONO

37x12.5 r16 creepy crawlers x4. New, never driven on but have fitted to wheels. $1500 ONO

16x10 alloy wheels x4. New, have had tires fitted but never driven on. PCD 6/139.7 Offset -50 and just 11.5kg per wheel.
$1000 ONO

Image

Nissan Safari axles, GQ, Auto, complete with disks. Can come with (cut down) chassis, arms, links, springs etc. OFFERS.

Autosport race seats x2. Steel frame. Comfortable. Fabric tatty around the base and some worn areas but more than good enough for any 4wd IMO $100 FIRM

FIBERGLASS cj3b jeep tub. New, never fitted to chassis. Rear arches tastefully cut out at the rear to give increased tire clearance. Supposed to have a RRP of around 6k I think. $1,500 ONO.

Genuine steel cj2a tailgate. Well used. Has a few holes drilled in that aren't needed and a bit of rust and dents but well useable with a bit of work.. or hang on the wall in ur shed. OFFERS.

NEW MB/GPW reproduction steel bonnet, with hinge. Painted in olive drab primer. Totally straight and as new. $150 FIRM. also have 1x pair of brand new in packet front catches for $50 FIRM

More to be added.

Can post pics for all parts below if requested.

-Nathan


how much for the front diff complete keen as
User avatar
Swamped
Hard Yaka
Posts: 1264
Joined: Sun May 25, 2008 10:19 pm
Location: North Island

Re: bought a house so parts for sale.

Post by Swamped »

mudlva wrote:
flyingbrick wrote:As everyone knows I've achieved sweet f all of this project and priorities have just changed so its getting parted out.

vh45 4.5 litre all aluminum nissan v8. Good condition, near 300hp stock, with loom and ECU.

Comes with nissan safari gearbox/transfer case which has extra clutch packs and bell housing fitted to accept the engine.

$2,000 ONO

37x12.5 r16 creepy crawlers x4. New, never driven on but have fitted to wheels. $1500 ONO

16x10 alloy wheels x4. New, have had tires fitted but never driven on. PCD 6/139.7 Offset -50 and just 11.5kg per wheel.
$1000 ONO

Image

Nissan Safari axles, GQ, Auto, complete with disks. Can come with (cut down) chassis, arms, links, springs etc. OFFERS.

Autosport race seats x2. Steel frame. Comfortable. Fabric tatty around the base and some worn areas but more than good enough for any 4wd IMO $100 FIRM

FIBERGLASS cj3b jeep tub. New, never fitted to chassis. Rear arches tastefully cut out at the rear to give increased tire clearance. Supposed to have a RRP of around 6k I think. $1,500 ONO.

Genuine steel cj2a tailgate. Well used. Has a few holes drilled in that aren't needed and a bit of rust and dents but well useable with a bit of work.. or hang on the wall in ur shed. OFFERS.

NEW MB/GPW reproduction steel bonnet, with hinge. Painted in olive drab primer. Totally straight and as new. $150 FIRM. also have 1x pair of brand new in packet front catches for $50 FIRM

More to be added.

Can post pics for all parts below if requested.

-Nathan


how much for the front diff complete keen as


I've asked about both but definitely keen on rear diff at least.
User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: bought a house so parts for sale.

Post by mudlva »

Swamped wrote:
mudlva wrote:
flyingbrick wrote:As everyone knows I've achieved sweet f all of this project and priorities have just changed so its getting parted out.

vh45 4.5 litre all aluminum nissan v8. Good condition, near 300hp stock, with loom and ECU.

Comes with nissan safari gearbox/transfer case which has extra clutch packs and bell housing fitted to accept the engine.

$2,000 ONO

37x12.5 r16 creepy crawlers x4. New, never driven on but have fitted to wheels. $1500 ONO

16x10 alloy wheels x4. New, have had tires fitted but never driven on. PCD 6/139.7 Offset -50 and just 11.5kg per wheel.
$1000 ONO

Image

Nissan Safari axles, GQ, Auto, complete with disks. Can come with (cut down) chassis, arms, links, springs etc. OFFERS.

Autosport race seats x2. Steel frame. Comfortable. Fabric tatty around the base and some worn areas but more than good enough for any 4wd IMO $100 FIRM

FIBERGLASS cj3b jeep tub. New, never fitted to chassis. Rear arches tastefully cut out at the rear to give increased tire clearance. Supposed to have a RRP of around 6k I think. $1,500 ONO.

Genuine steel cj2a tailgate. Well used. Has a few holes drilled in that aren't needed and a bit of rust and dents but well useable with a bit of work.. or hang on the wall in ur shed. OFFERS.

NEW MB/GPW reproduction steel bonnet, with hinge. Painted in olive drab primer. Totally straight and as new. $150 FIRM. also have 1x pair of brand new in packet front catches for $50 FIRM

More to be added.

Can post pics for all parts below if requested.

-Nathan


how much for the front diff complete keen as


I've asked about both but definitely keen on rear diff at least.


this could work i buy the froint you buy the rear scrap the chassis as its cut already and nathan sell the auto and trans as a complete unit

now its just come down to $$

how much nathan
pm me cheers
User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: bought a house so parts for sale.

Post by mudlva »

just thinking if it easier for you nathan i can take the complete rolling chassis for an agreed sum and leave the trans there sitting on a pallet or similar

i will be able to strip the diffs in my work shop easy enough and engine crane the diff on to a trailor etc for swamped
User avatar
Swamped
Hard Yaka
Posts: 1264
Joined: Sun May 25, 2008 10:19 pm
Location: North Island

Re: bought a house so parts for sale.

Post by Swamped »

Hamilton.
User avatar
Flash2004
Hard Yaka
Posts: 296
Joined: Mon Mar 05, 2007 12:00 pm
Contact:

Re: bought a house so parts for sale.

Post by Flash2004 »

I got all excited about those tyres! and then saw 16". Bugger!
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Hi all. Wee bit difficult at the moment as im posting from my cell phone but here goes.

Steering box, chassis, complete diffs, new efs xtreme steering dampener, drive shafts, no auto, all rods, arms and springs etc 1000. No idea what its worth so just throwing that out there.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Flash2004 wrote:I got all excited about those tyres! and then saw 16". Bugger!


try pming me an offer that makes them worthwhile :)
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Flash2004 wrote:I got all excited about those tyres! and then saw 16". Bugger!


try pming me an offer that makes them worthwhile :)
phone Ross Bolus (secretary of the BOP club) He'll save you.
Big
Hard Yaka
Posts: 2134
Joined: Thu Nov 03, 2005 12:00 pm
Location: central Otago
Contact:

Re: bought a house so parts for sale.

Post by Big »

bugger me.. :shock: just read ya post and sorry to hear things have changed for you.. BUT mostly I would have loved ya seats..dammit Jase.. :roll: oh well.. bit slow eh.. :mrgreen:
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Don't be sorry, I'm stoaked as about the other purchase 8)

Yeap the seats have gone- money went in today. 8) I got back what I paid for them so 8) again.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
badnuz
Hard Yaka
Posts: 2367
Joined: Sat Aug 11, 2007 12:00 pm
Location: Melbourne
Contact:

Re: bought a house so parts for sale.

Post by badnuz »

do you have proper headers for the VH45? mate has one in his road car and is keen for headers...???
i used to Cruise, now i PATROL
User avatar
chopdpatrol
Bush Crasher
Posts: 70
Joined: Mon Dec 06, 2010 9:17 pm

Re: bought a house so parts for sale.

Post by chopdpatrol »

Damn that v8 sounds good, after hoilday in auckland we'll see what the funds are like
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

badnuz wrote:do you have proper headers for the VH45? mate has one in his road car and is keen for headers...???


I have the factory headers which are tube.

There are other easy options for vh45 headers. There are stainless VK45 (i think thats right) headers on trademe that will fit with a flange change... and LS1 headers have the same port spacing too so tons of options.

Since the factory headers are tube with a proper flange its easy to just chop things up and reuse it.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

chopdpatrol wrote:Damn that v8 sounds good, after hoilday in auckland we'll see what the funds are like


No visiting the casino for you then. I limit your activities to bus rides and maybe a ferry trip across the harbor.
:)
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: bought a house so parts for sale.

Post by mudlva »

pm sent for the diffs
cheers rohan
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Thanks dude.

Diffs/Chassis are now sold.

Also, ADDED RADIATOR TO FIRST POST.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Bonnet, rolling chassis, seats and wheels now sold. Tires, jeep tub, engine, radiator, led 12/24v tail lights still fs.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
pressy
Hard Yaka
Posts: 445
Joined: Mon Aug 16, 2004 12:00 pm
Location: christchurch

Re: bought a house so parts for sale.

Post by pressy »

hi, how much for the 12/24v tail lights?

cheers

pressy
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

60. Brand new. Cost me 100. Square sort. Will post pics
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
De-Ranged
Hard Yaka
Posts: 1883
Joined: Tue Apr 06, 2004 12:00 pm
Location: Hawkes Bay

Re: bought a house so parts for sale.

Post by De-Ranged »

Still got the rad? locations of pipe fittings ?
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

Pretty sure its top left and bottom right when viewed from back of rad.
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

tires are on trademe for $1200
cj3b tub on trademe for $1


Motor still for sale. reasonable offers considered.

-Nathan
phone Ross Bolus (secretary of the BOP club) He'll save you.
User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland

Re: bought a house so parts for sale.

Post by flyingbrick »

phone Ross Bolus (secretary of the BOP club) He'll save you.
Post Reply

Return to “4WD Parts”