safari parts...

safari_mulisha · Post by **safari_mulisha** » Tue Aug 29, 2006 10:17 pm

i need a front grill i tore it off today on a tree
left hand indicator
winch

for a 1988 safari

dixie · Post by **dixie** » Tue Aug 29, 2006 10:30 pm

Hey there S-M,hope ya dont mind me gate crashing ya thread but I too need a fuel tank for my 88 safari swb if anyone can help.There certainly are some dreamers out there!!

safari_mulisha · Post by **safari_mulisha** » Tue Aug 29, 2006 10:59 pm

na sweet as
everythings worth gold these days... atleast thats what the current owners think

DieselBoy · Post by **DieselBoy** » Tue Aug 29, 2006 11:18 pm

I'll gate crash too......

Sarahs uncles father inlaw :roll:

goes over to Japan every couple of months and brings back buses and cars etc etc.

Basically if it will fit in a bus or a car the shipping is free. Example, her brother got him to bring back two Lexus V8's. Cost him $1200 for the two of them, he sold one for $1500 and basically got a free engine out of the deal.

We've got him looking out for a rear diff with factory locker for me to replace my knackered LSD, so if its too not urgent, we could get him to bring a few more bits back????

Just thought i would mention it :wink:

dixie · Post by **dixie** » Tue Aug 29, 2006 11:56 pm

Hey Pete,sounds good,but how long would one have to wait?just that cant really play at the mo truck starves of fuel after 2 km.but if ya idea of smashing the dent out through the inspection hole works i could put up wit it.

GQTROL · Post by **GQTROL** » Wed Aug 30, 2006 8:02 am

Dixie,
We've got a spare fuel tank for sale. What size is yours?

PM me with your details.

Cheers
Mitch

dixie · Post by **dixie** » Wed Aug 30, 2006 1:15 pm

Hey there GQ,what size? hhmmm dont really know costs about $80-$90 to fill,same wagon I guess as most y60 safaris(its the pig covered in shit on the home page)What kind of coin are ya after for one.I do have a few mates trying tosource me one.Cheers

GQTROL · Post by **GQTROL** » Wed Aug 30, 2006 5:33 pm

Dixie,
$50 for the tank plus freight.

Also have a pair of diffs (front and rear) for sale, complete hub to hub (auto), 4.1 ratios, incl front control arms and upper / lower rear control arms. Truck has done 256,000kms. $800 plus freight.

Plus an assortment of driveshafts (front and rear) from a shorty GQ and bare diff housings (no CV's / axles / hubs / rotors etc, just the housings) for those have have bent one.

Have a whole bunch of GQ crap from various wrecks, except for general consumables like indicators and grills.

safari_mulisha · Post by **safari_mulisha** » Wed Aug 30, 2006 7:33 pm

where are you from GQTROL?

lol i like how you called the grills consumables

dixie · Post by **dixie** » Wed Aug 30, 2006 10:58 pm

Hey there GQ,sounds good where are ya?

GQTROL · Post by **GQTROL** » Thu Aug 31, 2006 7:36 am

I'm in Rotorua.

4WDbits · Post by **4WDbits** » Thu Aug 31, 2006 8:51 am

There was a bunch of 1990 GQ stuff listed on trademe about Tuesday, was that you GQTROL?

GQTROL · Post by **GQTROL** » Thu Aug 31, 2006 8:59 am

That wasn't me. I'm not organised enough yet to have started listing things. Will do once I've pulled my finger out though and finished taking photos of no-longer needed suspension components / PTO winch etc.

safari_mulisha · Post by **safari_mulisha** » Thu Aug 31, 2006 9:39 pm

how much for the winch?
whats included?

GQTROL · Post by **GQTROL** » Fri Sep 01, 2006 7:41 am

Its only the winch head itself that I have. No PTO output, driveshafts, lever or cables.

Paid $550 for it at the begining of the year, I just want that back.

doddzee · Post by **doddzee** » Fri Sep 01, 2006 8:02 am

Have you modified the drum on that pto GQTROL?

Are you changing your winch set-up?

GQTROL · Post by **GQTROL** » Fri Sep 01, 2006 8:07 am

Nope, its a bog standard factory PTO winch. I bought it for Kym Bolton, but he has since changed his mind. We've got enough spare winches for the race truck, so I'm just trying to clear some space in my garage.

DieselBoy · Post by **DieselBoy** » Fri Sep 01, 2006 8:27 am

I'm desperatly tryin to think of things i need!!!!!!!

All i can think of is things i want

Whats the rear D/S like??
Do you have a factory transfer case gaurd kicking round??
Is the head in that rear diff any good??
Injector pump??
The section of plastic ducting betwen the airfilter box and the resonator box??

GQTROL · Post by **GQTROL** » Fri Sep 01, 2006 8:36 am

Rear driveshafts are fine (have 2 to choose from), UJ's in good nick but bear in mind they have done 150-180,000kms. $50 each.

I think we've got xfer-case guard. Will have a look.

Head in rear diff is fine (that truck has done 256,000kms), but ideally we want to get rid of complete front and rear diffs together.

Injector pump is already spoken for...someone wants a pump uprgade.

You talking about the round pipe into square airbox connector? Am sure I've got my old one, will have a look.

Cell is 027 241 3084, or email mitch.obrien@opus.co.nz is easier.

JTop · Post by **JTop** » Fri Sep 01, 2006 12:57 pm

How much for a factory EXH manifold
J Top

GQTROL · Post by **GQTROL** » Fri Sep 01, 2006 1:08 pm

JTop,
How many do you want? $150 each, plus freight.

Email mitch.obrien@opus.co.nz or 027 241 3084.

Cheers
Mitch

mudchuka · Post by **mudchuka** » Fri Sep 01, 2006 11:33 pm

how much for the pto winch? any intercoolers or bonnet scoops? cheers.

mudchuka · Post by **mudchuka** » Fri Sep 01, 2006 11:35 pm

how much for the pto winch? any intercoolers or bonnet scoops? cheers.

GQTROL · Post by **GQTROL** » Sun Sep 03, 2006 4:15 pm

JTop,
The above post with the exh. manifold price should read $50 each plus freight, my apologies.

Mudchuka,
Winch is $550 + freight. No PTO output, driveshafts, lever or cable. It will be going on TradeMe at the end of the week if someone from here doesn't take it.

Cheers
Mitch

DaveM · Post by **DaveM** » Sun Sep 03, 2006 4:49 pm

Any manual hubs?

Cheers

GQTROL · Post by **GQTROL** » Sun Sep 03, 2006 4:52 pm

DaveM
Sorry dude, only poxy auto hubs.

DaveM · Post by **DaveM** » Sun Sep 03, 2006 5:08 pm

How about a dark grey instrument surround, the one that covers speedo etc, houses rear wiper switches (no switches req.)

Also after black switch blanks from centre consol.

Cheers

GQTROL · Post by **GQTROL** » Sun Sep 03, 2006 5:14 pm

Dave,
Bound to have atleast one of those floating around. Will have an answer tomorrow or Tues.

Cheers
Mitch

GQTROL · Post by **GQTROL** » Sun Sep 03, 2006 5:38 pm

Put a new susp. kit in my shorty GQ, so old stuff is for sale.

4 x Tough Dog Foam Cell 2" lift shocks, 4 x Tough Dog 2" lift coils, 1 x Tough Dog steering dampener (pin-pin ends) and 4 x 4mm gearbox x-members spacers (so can drop gearbox either 4mm or 8mm). Kit has done 80,000kms so its not virgin, but would be good for someone who wants a little more clearance than standard. $200 for kit + freight.

2 x factory lower rear control arms. Genuine Nissan bushes fitted 80,000kms ago, but 2 are knackered, other 2 bushes are in good cond. $50 for the pair + freight.

1 x factory front panhard rod, 1 x factory rear panhard rod. Genuine Nissan bushes fitted 80,000kms ago, all still in good cond. $50 for the pair + freight.

Have pics of above if required.

Cheers
Mitch

GQTROL · Post by **GQTROL** » Mon Sep 04, 2006 12:11 pm

Sorry Dave, only have the brown instrument surrounds etc, no dark grey ones.